Reviews Adjustable Boom Length

InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8' to 5/8' Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic

  • Height & Angle Adjustable: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want..
  • Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm..
  • Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use..
  • Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber p....
Check Stock

AxcessAbles MS-101 Microphone Stand with Boom

  • ★ The AxcessAbles MS-101 Microphone Stand with Boom is a heavy duty tripod-based mic stand with a 30" fixed-length boom that folds for easy....
  • ★ Adjustable telescopic boom from 18" to 30.25". Adjustable height from 35.5" to 63"..
Check Stock

Fotoconic Triangle Wall Mounting Boom Arm Light Stand for Photography Studio Video Strobe Flash Lighting, Max Length 51.2 inches/130cm, 170 Degree Up and Down, 160° Left and Right

  • This wall mounting boom arm is perfect for supporting photographic equipment like studio video strobe lights, monolights, softboxes, umbrellas and reflectors.
  • Adjustable length to meet your needs: It can be fixed on a solid wall, and its length is adjustable extending up to 54 inches/137 centimeters.
  • Comes with 4 pieces expansion screws helping mount the boom arm on the wall much solidly.
  • Triangle Design: More stable and reliable.
  • The boom arm can be rotated up to 170 degrees, so you can adjust its angle and height synchronously.
  • Note: This boom arm must be fixed on a solid wall and the monolight in the picture is not included.
Check Stock

Scotty #1106 Depthpower Electric Downrigger w/ 60-Inch Telescopic Boom & Swivel Base, Rod Holder

  • Electric Downrigger w/ a boom that telescopes for extra reach and collapses for storage, makes for a great “big boat” downrigger.
  • Boom Length: 36-60 inches telescoping marine grade stainless steel boom.
  • 250 ft of 150 lb test, stainless steel downrigger cable.
  • Includes Scotty/Marinco plug and receptacle, Power Grip Plus Line Release, #1026 Swivel Pedestal Mount with 16 available positions.
  • Includes #1023 Tilt-Up Mounting Bracket enables unit to be tilted and locked in upright position.
  • Boom mounted adjustable 358 Rodmaster II Rod Holder.
  • Adjustable speed, lifts 7 lb. weights at 235 ft./min. & 15 lb. weights at 203 ft./min.
  • lowest amperage draw, with less than 1/3 the battery draw.
Check Stock

Neewer 2-Pack Triangle Wall Mounting Boom Arm for Photography Studio Video Strobe Lights Monolights Softboxes Umbrellas Reflectors,180 Degree Flexible Rotation,Max Length 70.8 inches/180CM Black

  • This boom arm must be fixed on a solid wall and the monolight in the picture is NOT included.
  • Compatibility: This wall mounting boom arm is perfect for supporting photographic equipment like studio video strobe lights, monolights, softboxes,....
  • Adjustable: It can be fixed on a solid wall, and its length is adjustable from 40.5 inches/103 centimeters to 70.8 inches/180 centimeters.
  • Triangle Design: More stable and reliable.
  • Each boom arm comes with 4 pieces of expansion screws helping mount the boom arm on the wall much....
  • Rotatable: The boom arm can be rotated up to 180 degrees, so you can adjust its angle and height synchronously.
Check Stock

Rockville Podcast Podcasting Recording Microphone Boom+Shockmount+Pop Filter

  • Package Includes: (1)RockvilIe RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height. (1)RockvilIe RockPop Double Screen Recording Mic Pop Filter w/Metal Gooseneck Clamp. (1) RockvilIe R-Shock Black Studio Condenser Microphone Metal Shock Mount w/Foam. RockvilIe RDMS70 Desktop Mic Stand with Boom and Steel Round Base and Adjustable Height. Heavy-duty weighted steel round base. Adjustable Height. Boom arm for precise positioning.
  • Rubber pad for extreme stability prevents sliding. Low profile design. Scratch-resistant powder coated finish. Specifications: Boom length: 13.8" (40cm). Height adjustment: 10.63" to 15.75" (27cm 40cm). Base Diameter: 6.3" (16cm). Thread Size: 3/8". Weight: 4.85 lbs (2.2 kgs). RockvilIe RockPop Double Screen Recording Microphone Pop Filter with Metal Gooseneck Clamp. Prevents pops when recording vocals. Adjustable clamp fixes securely to any mic stand. Gooseneck for precise positioning.
  • The first screen blocks air blasts. The gap in between the 2 screens disperses any remaining air pressure. By the time it passes the second screen, the blast is easily contained. Adjustable Gooseneck: The metal gooseneck holder fully supports the filter's weight and keeps it in place. You can adjust the angle and distance between....
Check Stock

Rockville RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height

  • Features of RDMS70: Rockville RDMS70 Desktop Mic Stand with Boom and Steel Round Base and Adjustable Height, Heavy-duty weighted steel round base, Adjustable Height.
  • Boom arm for precise positioning, Rubber pad for extreme stability prevents sliding, Low profile design.
  • Scratch-resistant powder coated finish. Specifications: Boom length: 13.8" (40cm).
  • Height adjustment: 10.63" to 15.75" (27cm – 40cm), Base Diameter: 6.3" (16cm).
Check Stock

Daiwa Wilderness Downrigger Trolling Freshwater Rod, 8'6" Length, 2Piece, 12-20 lb Line Rate, Medium Power

  • Electric Downrigger w/ a boom that telescopes for extra reach and collapses for storage, makes for a great “big boat” downrigger.
  • Boom Length: 36-60 inches telescoping marine grade stainless steel boom.
  • 250 ft of 150 lb test, stainless steel downrigger cable.
  • Includes Scotty/Marinco plug and receptacle, Power Grip Plus Line Release, #1026 Swivel Pedestal Mount with 16 available positions.
  • Includes #1023 Tilt-Up Mounting Bracket enables unit to be tilted and locked in upright position.
  • Boom mounted adjustable 358 Rodmaster II Rod Holder.
  • Adjustable speed, lifts 7 lb. weights at 235 ft./min. & 15 lb. weights at 203 ft./min.
  • lowest amperage draw, with less than 1/3 the battery draw.
Check Stock

Neewer Wall Mounting Triangle Boom Arm for Photography Strobe Light, Monolight, Softbox, Umbrella, Reflector and Ring Light, Support 180 Degree Rotation, Max Length 4 Feet/125cm (Black)

  • Wide Application: The Neewer wall-mounted boom arm is a space-saving holder for strobe, monolight, ring light, softbox, reflector, and microphone that need to be fixed on the wall of your room, studio, or workshop.
  • Adjustable Length: The length can be extended up to 4.1’ (125cm) to suit your different requirements, and the triangle structure adds stability to the boom arm.
  • Dual-Swivel Design: You can swing the boom arm up and down or side to side from 0° to 180° for various angle adjustments, or fold it flat against the wall to save space when necessary.
  • Secure Mounting: The 4 expansion screws included in the package help you easily mount the boom arm to a solid wall, firm and secure.
  • Package Contents: The Neewer Wall-Mounted Boom Arm, and 4 Expansion Screws.
Check Stock

Neewer Wall Mounting Triangle Boom Arm for Photography Strobe Light, Monolight, Softbox, Umbrella, Reflector and Ring Light, Support 180 Degree Rotation, Max Length 4 Feet/125cm (Silver)

  • Wide Application: The Neewer wall-mounted boom arm is a space-saving holder for strobe, monolight, ring light, softbox, reflector, and microphone that need to be fixed on the wall of your room, studio, or workshop.
  • Adjustable Length: The length can be extended up to 4.1’ (125cm) to suit your different requirements, and the triangle structure adds stability to the boom arm.
  • Dual-Swivel Design: You can swing the boom arm up and down or side to side from 0° to 180° for various angle adjustments, or fold it flat against the wall to save space when necessary.
  • Secure Mounting: The 4 expansion screws included in the package help you easily mount the boom arm to a solid wall, firm and secure.
  • Package Contents: The Neewer Wall-Mounted Boom Arm, and 4 Expansion Screws.
Check Stock

Neewer Wall Mounting Triangle Boom Arm for Ring Light, Monolight, Softbox, Reflector, Umbrella, and Photography Strobe Light, Support 180 Degree Rotation, Max Length 5.9 feet/180cm (Black)

  • Wide Application: The Neewer wall-mounted boom arm is a space-saving holder for strobe, monolight, ring light, softbox, reflector, and microphone that need to be fixed on the wall of your room, studio, or workshop.
  • Adjustable Length: The length can be extended up to 5.9’ (180cm) to suit your different requirements, and the triangle structure adds stability to the boom arm.
  • Dual-Swivel Design: You can swing the boom arm up and down or side to side from 0° to 180° for various angle adjustments, or fold it flat against the wall to save space when necessary.
  • Secure Mounting: The 4 expansion screws included in the package help you easily mount the boom arm to a solid wall, firm and secure.
  • Package Contents: The Neewer Wall-Mounted Boom Arm, and 4 Expansion Screws.
Check Stock

Neewer Wall Mounting Boom Arm with Triangle Base for Photography Studio Video Strobe Light Monolight Softbox Umbrella Reflector, 180 Degree Rotation, Max Length 66.5 inches/169centimeters (Black)

  • Wide Application: The Neewer wall-mounted boom arm is a space-saving holder for strobe, monolight, ring light, softbox, reflector, and microphone that need to be fixed on the wall of your room, studio, or workshop.
  • Adjustable Length: The length can be extended up to 5.5’ (169cm) to suit your different requirements, and the triangle structure adds stability to the boom arm.
  • Dual-Swivel Design: You can swing the boom arm up and down or side to side from 0° to 180° for various angle adjustments, or fold it flat against the wall to save space when necessary.
  • Secure Mounting: The 4 expansion screws included in the package help you easily mount the boom arm to a solid wall, firm and secure.
  • Package Contents: The Neewer Wall-Mounted Boom Arm, and 4 Expansion Screws.
Check Stock

Samson Q2U USB/XLR Microphone with Mic Stand

  • - The Samson SA-Q2U Recording Pak offers a high-quality dynamic handheld USB/XLR Microphone..
  • - Q2U Dynamic USB/XLR Microphone Pack includes a microphone, 1.5 m USB cable, 6 m XLR to 1/4" cable, mic clip, tripod stand, windscreen, and a tripod extension.
  • - Groove Pak MS45 Microphone Boom Stand with boom microphone stand with folding tripod base, twist-style clutch for vertical height adjustments, and 30" boom with adjustable length and angle settings.
  • - The Groove Pak MS45 Microphone Boom Stand is made with a steel constructed that has twist-style clutch for vertical height adjustments and includes a cable clip.
  • - Emblazoned with the Sam Ash logo, this cotton polish cloth is a must have for all guitar players.
Check Stock