Reviews Adimlab 3d Printer

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • ...ace Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the nee....
Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

  • 3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
  • 3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
  • Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
  • Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
  • 3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Blue

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Red

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black, MP05775

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot MP05792 PLA Filament, 1.75 mm Diameter, Small Spool, Natural

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05823 PLA Filament, 1.75 mm Diameter, Small Spool, Black

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Flexible TPU 3D Printers Filament 1.75mm Color is Clear Accuracy +/- 0.05mm Net Weight 1KG(2.2LB) Transparent TPU Hardness 95A…

  • 【1.75MM TPU(flexible) FILAMENT】 The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), TRONXY 3D printer filaments have adjusted the degradability of the material for optimal performance, so TRONXY TPU(flexible) filaments are not brittle during 3D printing jobs.
  • 【+/-0.02MM TOLERANCE】TRONXY TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments.
  • 【VACUUMED SEALED PACKAGING】Some 3D printing materials can be negatively affected by moisture, so this is why TRONXY 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【100% ENVIRONMENTAL FRIENDLY】TRONXY 3D printer filaments comply with the Restriction of Hazardous Substance (....
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Cool Gray, MP05784

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock