Reviews Adhesive Curing Agent

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 5 lbs. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Contains 5 lbs. of Insta Cure #1, enough to process approximately 480 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 4 oz. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Contains 4 oz. of Insta Cure #1, enough to process approximately 120 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 1 lb. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Contains 1 lb. of Insta Cure #1, enough to process approximately 480 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 8 oz. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Packet Contains 8 oz. of Insta Cure #1, enough to process approximately 240 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Hoosier Hill Farm Prague Powder No.1 Pink Curing Salt, 2.5 Pound

  • Prague Powder #1 can be used in the preserving and curing of: Semi-dry and cooked meats, Sausage, Fish, Jerky, Bacon, Ham, Pastrami, Hard Salami, Corned Beef..
  • Contains 2.5 lbs of Prague Powder No.1 Pink Curing Salt, also referred to as Tinted Cure or Pink Curing Salt. A critical component in the meat curing and sausage making process, enough to cure 1000 lbs of meat..
  • Hoosier Hill Farm is located in America’s heartland of northeast Indiana. Our products and ingredients are guaranteed fresh and we are proud of our heritage and good, old-fashioned values!.
  • Use 1 oz. of cure for 25 lbs. of meat or 1 level teaspoon of cure for 5 lbs. of meat or fish. Mix cure with cold water. Too much or too little Pink Curing Salt can adversely affect health, taste, and food quality..
  • To cure correctly and within food safely guidelines, it is extremely important to use the proper amount of Prague Powder #1. As a curing agent, Prague Powder #1 serves to inhibit bacteria growth and helps to maintain meat flavor and appearance..
Check Stock

Colloidal Silica Rigidizer - Coating for Refractory Ceramic Fiber Products - 1 Quart

  • rigidizer can be used as the cohesive agent for various fireproof materials, widely used in industrial furnace thermal technology equipment, and has....
  • high temperature stability, Withstand Temperature up to 2300 F.
  • Applied by spraying, rolling, dipping, or brushing, Normal Curing Time 24 Hours (Post Application).
  • Rigidizer can be used in paper-making industry . It can be used as the anti-glutinous agent of cellophane, pre-treatment agent of photographic paper,....
  • High Velocity Resistance, Reduces Hot Gas Erosion or Flame Impingement., Reduces Airborne Particles.
Check Stock

KDGENG Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue,Industrial Heat Resistance Cold Weld Metal Repair Paste for Metal, Plastic, Wood (20g)

  • 1. EFFECTIVE ADHESIVE AGENT –2022 New Fullkk Liquid Metal Filler developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces..
  • 2. HIGH-TEMPERATURE RESISTANT – Industrial Heat Resistance Cold Weld Metal Repair Paste Gel AB Glue Adhesive can withstand temperatures up to 150degC. When fully cured, it is as hard as iron and provides uniform bond line thickness.joiuple magic high temperature resistant liquid metal welding filler.
  • 3. EASY TO USE AND QUICK-DRYING-MIX – It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours. Apply and let dry for a few hours. It will bond almost any clean surface that is free of dirt and oil..
  • 4. SUPERB BOND STRENGTH – It forms a strong and stable permanent bond that should last for ages.After curing, the adhesive layer has good toughness, is not easy to break, and is resistant to aging and oil stains..
  • 5. WIDE APPLICATION RANGE - Mainly used for filling of casting defects such as steel castings, blisters, pores, cracks, etc., and also suitable for repairing oil....
Check Stock

PHTW Glue Strong Plastic Metal Wood Metal Glass Ceramic Acrylic Adhesive

  • 【Effective Adhesive Agent】developed As an Alternative to Torch Welding,It Provides Strong and Long-lasting Repairs to Metals and Multiple Other Surfaces. It Will Bond Almost Any Clean Surface That is Free of Dirt and Oil..
  • 【Simple to Use】After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours..
  • 【High-Temperature Resistant】: Can withstand temperatures up to 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • 【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time..
  • 【Wide Use】mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks,Plumbing,Concrete Breaks, and a Whole Lot More..
Check Stock

MMOBIEL B-7000 15 ML Multipurpose High for Industrial Glue Semi Fluid Transparent Adhesive 15 ml 0.51 fl.oz

  • Dedicated for UV Glass Screen Protector: The UV Adhesive used as Filling Glue between glass film and Screen,and needs UV Light to Curing.Not suitable....
  • Quickly Curing and Easily Flow: Rotate the Cover Counterclockwise to open it,and then Rotate the Knot to Drip the Adhesive,and Aligh the UV Glass....
  • LOCA Tech: When the UV Adhesive disperses over the entire screen,it will fills minor cracks and scratches on screen, after Curing,the former cracks....
  • Medium viscosity and Environmental friendly: The UV Adhesive is no harm for Human body and the Phone,Lower Ordor than other Brand. The Medium....
  • Dosage for usage: Each 1 Stick have 2 ML,it is enough for 1 UV Glass Screen Protector to be used at one time. It can also used as the repair Filler....
Check Stock

Krazy Fix Light Cure UV Curing Super Glue with Fast Cure LED Light.14 oz

  • Light Cure Super Glue: Krazy Fix Light Curing System is a dual cure cyanoacrylate adhesive that bonds with almost any surface, and can be used in place of hot melt glue sticks, rubber cement, or heavy duty construction adhesive..
  • Fast Curing: This fast setting adhesive has been specially formulated to cure quickly and naturally, or with a light source. Different than a UV resin kit, Krazy Fix uses an LED Light that allows glue to form a bond in just 5 seconds..
  • Strong, Reliable Welds: Krazy Fix Light Cure delivers maximum joint strength to use as an industrial glue for your home improvement needs, as it can hold over 1000 pounds! Ideal for low load bearing applications, or filling gaps or seams. Once the light cures the joint, the item is ready for immediate use..
  • Versatile Adhesive: This light curing super glue has many applications and benefits, and can bond with almost any surface of any size. From jewelry or costume design, to phone cable repair or model building. Item is Made in the USA with globally sourced components..
  • Choose Krazy: Our collection of adhesive products feature high-quality materials. Whether you need a heavy duty tape for wall hanging or waterproof glue for outdoor mounting, Krazy Products has the right solution for your crafting o....
Check Stock

REALINN Epoxy Tile Grout Bright Porcelain White 400 ml, Dual Tube Waterproof Stain-Proof Colorant Resin Sealer, Restore and Spruce Up Tile Grout Line for Bathroom Kitchen Wall Floor

  • Epoxy Grout, made of epoxy resins combined with curing agent, pigment. Advanced double tube design, easy to apply, no mixer pre-mix, just one double tube epoxy gun to finish the job. (NOTE: Caulking gun and tools are not included. ).
  • Color: Bright Porcelain White. Even color, long lasting and no discoloration. Non-hazardous, no unpleasant odor..
  • Strong and durable, with greater bond strength and greater flexibility. Heat and cold resistant, no cracking, shrinkage or discoloration..
  • Waterproof and stain-proof, widely used in tile showers and kitchens, floors and walls, splashback tiling over vanities and countertop, surfaces underneath sinks or basins, swimming pools, could use both indoor and outdoor. Ideal replacement for regular grout and sealant caulk..
  • Kit includes: Double tube epoxy grout (200g for tube A + 200g for tube B) + 3 static mixing nozzle. Tips: When using the first time, please squeeze out grout about 30 cm and discard. Prevent failure to dry and poor adhesion due to uneven mixing of pigment and curing agent..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

[10 Pack]UV Adhesive for UV Tempered Glass film,[Rapid solidification][Fingerprint Unlock compatible][Easy to remove] Loca UV Glue for all models of UV Screen Protector

  • Dedicated for UV Glass Screen Protector: The UV Adhesive used as Filling Glue between glass film and Screen,and needs UV Light to Curing.Not suitable....
  • Quickly Curing and Easily Flow: Rotate the Cover Counterclockwise to open it,and then Rotate the Knot to Drip the Adhesive,and Aligh the UV Glass....
  • LOCA Tech: When the UV Adhesive disperses over the entire screen,it will fills minor cracks and scratches on screen, after Curing,the former cracks....
  • Medium viscosity and Environmental friendly: The UV Adhesive is no harm for Human body and the Phone,Lower Ordor than other Brand. The Medium....
  • Dosage for usage: Each 1 Stick have 2 ML,it is enough for 1 UV Glass Screen Protector to be used at one time. It can also used as the repair Filler....
Check Stock