Reviews Accurate Filament Feeding System

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
  • Used with other motherboards: The material detection module uses the level tra....
Check Stock

XYZPrinting Da Vinci EVO 3D Printer Fully Open Source with Resume Printing Function 3rd Generation Hardened Steel Nozzle DIY 3D Printers Printing Size 8.6 x 8.6 x 8.6 inches

  • Accuracy - This fifty-five pound machine is the ultimate powerhouse in precision printing.
  • Speed - An acceleration speed of 3000mm/s2, the Pro EVO will have you working on your next project in minutes..
  • Calibration - Pro EVO calibrates itself under four minutes with 440 touch points. It features an auto-calibration mode that detects the position of the extruder and the print bed for superior accuracy when printing..
  • Feeding System - Being the third generation feeding system, Pro EVO offers simpler ways of loading filament. Supporting over ten materials, the device is compatible with third party filaments for all your printing needs..
  • Quick Dry Function - Need a place to keep spare filaments? No problem. XYZ included a built-in storage system. If you’d like your materials to be manufactured in pristine condition, try the Filament Quick Dry function for higher quality prints..
Check Stock

Mingda Magician X 3D Printers One Touch Smart Auto Leveling FDM 3D Printing Machine Printing Size 230x230x260mm with TMC Silent Motherboard

  • Intelligent Automatic Leveling: Magician X 3D Printer equipped with a high-sensitivity sensor, the intelligent leveling system can automatically....
  • Ultra-Silent Motherboard with TMC: MINGDA Magician X 3D printer equipped with TMC Silent Drivers.
  • with upgraded Fans of Extruder and modular....
  • Efficient filament feeding:Magician X printer build in double-gears direct extruder.High extrusion force make the filament feeding more smooth.The....
  • Resume Printing Function:The same as most recent printers, MINGDA Magician X can resume printing from the last recorded extruder position after....
  • Carborundum Glass Platform:The 4th generation glass platform enable the hotbed heat up quicker and prints adhere better without the warping.Super....
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • ...hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models..
  • Support Printing Flexible and High Temperature Filament - With creality sprite extruder and up to 300°C and all metal hotend kit, the direct drive extruder supports 1.75 MM filaments, including PLA filament, TPU filament, PETG filament, ABS filament, PA filament, PC filament etc..
Check Stock

BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Transparent)

  • ❤【Function of Filament Detection Module】 To detect Filament in 3D printer run-out,pause detection,it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material..
  • ❤【Filament Break Detection Module】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed..
  • ❤【Detection Method】The material detection module uses the level jump detection method..
  • ❤【Filament Size】 It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved..
  • ❤ 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request..
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C - 220°C, Bed 55°C - 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or ....
Check Stock

OVERTURE Easy PLA 1.75mm 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Easy Digital Blue)

  • ... manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
  • Larger spool inner diameter design makes feeding smoother.
  • 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm.
  • 【Cost-effective and Wide Compatibility】With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more.
  • 【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier 3d printer filament white easy pla 3d printer filament 1.75 pla spool 3-d printer filament 1kg pla filament mk3 1.75 filament 3d printer accessories 3d art ender 3 pla filament Engineering Maker Layer adhesion prototyping PLA roll polylactic acid.
Check Stock

Haosegd 5 Colors PLA Filament 3D Printing Filament PLA Filament 1.75MM 250G 3D Printer Filament Bundle 1250G in Total Tolerance 0.02mm No Clogging & Bubbles

  • 1.75MM PLA Filament Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle and 55 degree of hot bed for getting excellent printing effect..
  • 3D Printing Filament Feature：PLA material has the characteristics of strong adhesion, good melt, stable feeding, no warpage, no clogging of nozzles, etc. These characteristics ensure its stable operation..
  • 3D Printer Filament Harmless：PLA Filament is made of a biological material extracted and purified from corn. It has no Bubbles, and harmless to humans. It will not harm the health of you and your family when you work..
  • 3D Printer Filament Bundle First Choice： The pla material is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first choice whether considering safety factors or practical aspects..
  • PLA Filament 1.75MM Bundle Multiple colors: The colors of this combination are diverse and beautiful. There are five color-White, Black, blue, Purple and Red, included in the package. You can use them to print models with different colors..
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • ...accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】1.75 petg 1kg uses digital caliper system which measures the dimensions a thousand times and automatically adjusts them. This help ensures the 1.75mm diameter and the ±0.02mm tolerance are accurate and consistent. 1.75 petg 3d filament color is also consistent without traces of other color..
  • 【PETG Filament Guarantee & Service】We Provide 30 Days Return and Money-Back Service, Life-time Technical Support and Timely Online Customer Service. Any Questions, Please Feel Free to Contact us Via Your Order (Click Your Account > Your Orders > Find This 3D Printer Filament Order > Click Contact Seller) Or The After-Sales Card..
Check Stock

OVERTURE Easy PLA丨 1.75mm 3D Printer Filament, 5kg Cardboard Spool (11lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Black&White&Red&Rock White&Space Gray)

  • ...and less-tangle, so as to avoid possible snap and line breaking.
  • Larger spool inner diameter design makes feeding smoother.
  • 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm.
  • 【Cost-effective and Wide Compatibility】With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more.
  • 【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier 3d printer filament white easy pla 3d printer filament 1.75 pla spool 3-d printer filament 1kg pla filament mk3 1.75 filament 3d printer accessories 3d art ender 3 pla filament Engineeri....
Check Stock

IWECOLOR 3D Printer Filament Dual Colors 4* 0.44lbs/Spool Red/Blue, Red/Green, Red/Gold, Blue/Green Bicolor 3D Printing Filament Sets

  • 【Silk PLA Filament Dual color】The IWECOLOR PLA Dual Color it's combined two colors, High-resolution shiny Eco materials colors change on two different sides. The amazing visual effect is created by the unique surface illusion color technology of IWECOLOR. Generally, You can change the visible color by rotating the color-blending filament to different orientations. HIGH PURITY PLA FILAMENT-PLA raw material is made of corn starch. Perfect 3d printing with 99% FDM 3D printers and 3D pen..
  • 【Magic Silk Filament】IWECOLOR Silk PLA 3D printer filament is made with quality andconsistency in mind, as beginner & expert friendly top quality 3D printing filaments, making iteasy to get started with basic settings. You can print your creative dual colors in one model, silkglossy smooth appearance. Perfect for arts, crafts, and DIY special 3D print projects at home, Laboratories, studio, or school..
  • 【No-tangle and Easy to Use】Produced with laser diameter control and automatic winding system guarantees success even in the large model prints. Further strict manual examination,to make sure the lines are tidy and no-tangle. A larger 3D printing filment spool inner ....
Check Stock

QIDI Technology X-one2 Single Extruder 3D Printer Metal Frame Structure,Platform Heating

  • ▶Excellent Choice - The Aquila is an open source 3D printer developed by the FDM Technology which offers a print volume of 220 x 220 x 250 mm, it is....
  • ▶Audo Feeding - Insert the filament into the guide wire tube, activate the auto feeding function then it will be automatically sent to the nozzle,....
  • ▶Carborundum Glass Heated Bed Platform - With strong adhesion and uniform heating, it can be heated to 70℃ within 2-3 minutes and keep uniformly....
  • ▶Intelligent Backup System - Aquila 3D printer has the ability to recover from a power failure. It will automatically create a save point when....
  • ▶Easy to Assemble - The printer comes with several pre-assembled parts. You can assemble the printer quickly by following the instructions or video.....
Check Stock