Reviews Ac dc Voltage Testers

Fluke PRV240 Proving Unit

  • PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
  • Sources both AC and DC steady-state voltage - supplies 240 V DC/AC.
  • A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool.
  • Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers.
  • Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact.
Check Stock

Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip

  • Super Large LCD Screen -- Compared with other voltage testers, our screen is 6.6 larger than their testers, and the high resolution screen will show 3 test results, such as the volt, frequency and analog bar.
  • Non-Contact & 8 LED Indicators -- Non contact voltage detection ensures the safety of testing, and 8 LED Indicators in 3 colors display (Green, Yellow, Red) help to distinguish the detected voltage intensity easily.
  • Auto-ranging Digital Multimeter -- Designed for the novice. Plug the test leads only, the multimeter tester can smart to test voltage DC or AC frequency, resistance, as well as continuity.
  • Perfect Helper for Electrical Issues -- SUETTLA X1 Volatge tester arrive CAT II 600V safety level, help to detect the null/live wire, breakpoint locate, AC/DC volts testing, Ohm measure etc, to save the high service fees..
  • Fastest Reading Speed -- With upgraded chips, greatly increase the sensitivity, make the voltage multimeter tester measuring in 0.2s (5 times/s).
Check Stock

Klein Tools CL320KIT HVAC Kit for HVAC Testing; Digital Clamp Meter, Non-Contact Voltage Tester, and Infrared/Probe Thermometer

  • HVAC Kit with testers for the HVAC Professiol: HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight.
  • Cat. No. CL320 HVAC Clamp Meter with TRMS technology measures AC current, NCVT, AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, continuity, and temperature.
  • Cat. No. IR07 Dual IR Probe and Thermometer measures temperature from -40 to 572 Degrees Fahrenheit (-40 to 300 Degrees Celsius).
  • measure surface temperature with Infrared Thermometer (DS ratio 8:1).
  • Measure air vents and duct temperature using temperature probe with hands-free hanging hook.
  • calculate differential temperature (T1-T2) for both IR and probe temperatures.
  • Cat. No. NCVT3P is dual-range and detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
Check Stock

ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument

  • Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
  • Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
  • Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
  • Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
  • Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
Check Stock

Klein Tools 80092 Electrical Tester Kit and Inspection Kit with Circuit Breaker Finder, Voltage Tester, and Test Leads, 6-Piece

  • BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications.
  • Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester.
  • VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance.
  • also tests batteries, diodes, and continuity.
  • DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications.
  • DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral / Open Ground wiring faults.
  • CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Check Stock

UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module

  • 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
  • Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
  • Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
  • The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
  • Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.
Check Stock

Klein Tools ET45VP Voltage and GFCI Receptacle Tester, AC/DC Voltage Electrical Test Kit

  • AC/DC Voltage and GFCI Receptacle Outlet Test Kit.
Check Stock

Fluke TL75 Hard Point Test Lead Set

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true-rms for accurate measurements on non-linear loads.
  • The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Switches Be Trippin Funny Master Electrician Fuse Box T-Shirt

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

KKnoon Circuit Breaker Finder - Multifunction Network Cable Tester for CAT5/CAT6,Ethernet Cable Tester with Multimeter,Poe Circuit Tester,Test Fault Distance Location and Length Measurement

  • 【Upgrade Multi-Function Circuit Breaker Finder】 Including poe tester,Anti-disturbance cable scanning,continuity tester, voltage testing,Fault distance location,port flashing,Vibration Mode,Volume adjustment, multimeter, cable length testing, and LED flashlight function..
  • 【3 Modes Network Cable Scanning】Circuit breaker finder has a Unique Anti-disturbance digital scanning mode, analog mode, Poe mode.1500m Max audio transmission distance.16-20VP-P super strong signal to cable tracer.You can set the frequency, and three modes can be switched freely..
  • 【Multimeter】The breaker finder with all in one multimeter with DC AC Voltmeter and Ohm Volt Amp Tester.
  • Circuit tester measures voltage , Current.K-type probe to measure temperature 20-1000℃,AC Voltage, Current testing range 4-400V,1.0A-10A.NCV power display and diode testing..
  • 【Poe testing & Hub Blink】The K618 network cable tester can identify pins that are providing power and detect how much voltage, Locate network port by the flashing port light (blink every 1 second) on Hub and Switch. Available to 500M Hub/ switch. The measurement area includes circuit t....
Check Stock

Automotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Power Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock