Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
- This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
- These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
- Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
- And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
- Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check StockAEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
- All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check StockTE CONNECTIVITY/POTTER & BRUMFIELD T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Flange
Check StockTWTADE/JQX-62F-2Z Coil Voltage AC 110V 80A DPDT Electronmagnetic Relay,High Power Relay AC 110V
- Size (Approx.): 85 x 65 x 65mm/ 3.3" x 2.5" x 2.5"(L*W*H).
- Package Content: 1 x High Power Relay + 8 x Terminals.
Check Stock275KXX-240VAC Electromechanical Relay 220/240VAC 500Ohm 15A 3PST-NO-DM (75.8x58.9x85.6)mm Contactor Relay
- Size (Approx.): 85 x 65 x 65mm/ 3.3" x 2.5" x 2.5"(L*W*H).
- Package Content: 1 x High Power Relay + 8 x Terminals.
Check Stockuxcell AC 110V Coil Power Relay 10A DPDT LY2NJ with PTF08A Socket Base
- Package Content: 1 x Power Relay w Socket.
- Contact Capacity: AC 240V/10A, DC 28V/10A.
- Relay Size: 2.6 x 2 x 3.5cm / 1″ x 0.8″ x 1.4″ (L*W*H).
- Socket Size: 7 x 2.2 x 2.7cm / 2.7″ x 0.87″ x 1″ (L*W*H).
Check StockHubbell TD1000 Digital Display Module
- Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
- Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
- Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
- High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
- High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check StockOONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
- Product Name:Electromagnetic Power Relay.
- Contact Capacity: 10A 6V-380VAC/10A 6V-220VDC.
- Overall size(approx. ): 86 x 56 x 28mm/ 3.39 x 2.2 x 1.1 inches(L*w*h).
- Package Content : 2pcs x Power Relay + 16pcs x Terminals.
Check StockTE CONNECTIVITY / POTTER & BRUMFIELD T92P7D22-12 POWER RELAY, 12VDC, 30A, DPST-NO, FLANGE
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
- Product Name: Electromagnetic Power Relay.
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.
Check Stockuxcell AC 24V Coil Red Light DPDT 8 Pins Power Relay 5 Pcs + Socket Base
- AC 240V 5ADC 28V 5A : AC 240V 5ADC 28V 5A.
- Fixing Mount Hole Size : 5 x 4.5mm/0.2" x 0.18"(L*W).
- Relay Size (Approx.) : 4x 2.7x 2cm/1.6" x 1.1" x 0.8"(L*W*H).
- Socket Size : 7.5 x 2.2x 3cm/3" x 0.87" x 1.2"(L*W*H).
- Shell Material : Plastic, Electric Parts.
- Package Content : 5 x PowerRelay5 x Socket.
Check Stock788-304, Electromechanical Relay 24VDC 1.26KOhm 16A SPDT (15x86x53) mm Socket Switching Relay
- Our Power Relay and Socket Base all through UL and CE certification.Product Name:subminiature Power Relay.
- Contact Rating: 6A 250VAC / 30VDC, Construction: Plastic seaied..
- Relay Model:HF41F/24-ZS , Relay Slim size (width 5mm), Outline size:28×5×15mm.
- Socket Model: 41F-1Z-C2, Size : 70.9 x 88.3 x 6.3mm / 2.798"x3.48"x 0.25"(H*L*W).
- Package Content : 3× Power Relay , 3× Socket Base, 1x Rail Slotted Aluminum , 2×Screw.
Check StockSiemens 3TX7131-4CF13 Basic Plug In Enclosed Power Relay, DPST-NO Contacts, 30A Contact Rating, 120VAC Coil Voltage
- Applications Power supplies, heating & ventilation, control equipment.
- 2 pole 30 A, 2 CO or 2 NO contacts, High switching capacity up 30 A / 400 VAC,PCB- or quick connect terminals or chassis mount.
- DC- or AC coil,4 kV / 8 mm coil-contact,Insulation to VDE 0631 and VDE 0700.
Check StockRelay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(12VDC)
- Our Power Relay and Socket Base all through UL and CE certification.Product Name:subminiature Power Relay.
- Contact Rating: 6A 250VAC / 30VDC, Construction: Plastic seaied..
- Relay Model:HF41F/24-ZS , Relay Slim size (width 5mm), Outline size:28×5×15mm.
- Socket Model: 41F-1Z-C2, Size : 70.9 x 88.3 x 6.3mm / 2.798"x3.48"x 0.25"(H*L*W).
- Package Content : 3× Power Relay , 3× Socket Base, 1x Rail Slotted Aluminum , 2×Screw.
Check Stock