Reviews Abs Power Switch

Disconnect Switch Double Throw 100A 220V 2 Pole Safety Two-Way Double-Switching Switch Orange

  • Parameters: Voltage:0-380v,Rated Current:100A. Peak Withstand Current: 120A. Pole: 2. Eectrical Life: 10 Years..
  • Material:Copper + ABS + BMC+insulation. The Knife Switch Is Made Of High Quality Copper And Abs, Durable Practical And Stable Performance. With The ABS Cover, Very Safe To Use..
  • Safe And Reliable: The Double Throw Knife Switch Makes A Solid Connection And Will Draw Quite A Bit Of Current To Make A Safety Guarantee..
  • Suitable For Home And Industrial Appliances, Convert Between Power System And Self Generator Circuit..
  • Package include: 1 x Orange Disconnect Knife Switch.
Check Stock

Disconnect Switch Double Throw 100A 380V 4 Pole Safety Two-Way Switching Switch Orange Power Switches Industrial

  • Parameters: Voltage:0-380v,Rated Current:100A. Peak Withstand Current: 120A. Pole: 4. Eectrical Life: 10 Years..
  • Material:Copper + ABS + BMC+insulation. The Knife Switch Is Made Of High Quality Copper And Abs, Durable Practical And Stable Performance. With The ABS Cover, Very Safe To Use..
  • Safe And Reliable: The Four Throw Knife Switch Makes A Solid Connection And Will Draw Quite A Bit Of Current To Make A Safety Guarantee..
  • Suitable For Home And Industrial Appliances, Convert Between Power System And Self Generator Circuit..
  • Package include: 1 x Orange Disconnect Knife Switch.
Check Stock

OONO ATX 24/20-Pin DC Power Supply Breakout Module with 2.1A USB Port

  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header..
  • Stand-By and Power-ON indicator LEDs. With latching button switch to control power output ON/OFF, it also supports external latching switch control power output ON/OFF(when using an external switch, the switch state on the module must be set to OFF).
  • With USB 5V power output, can support 2.1Amp output current for Apple products..
  • High quality screw terminal block for power output. +3.3V +5V +12V can support current maximum 24 Amp(continuous output 12 Amp), -12V can support current maximum 1 Amp..
  • ABS plastic enclosure, you can use screw mount to wood board or wall, of course, can also be placed on the desktop..
Check Stock

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

Tattoo Foot Pedal - Yangna Tattoo Pedal with 5'ft Clip Cord And Standard 1/4 Phono Plug Tattoo Foot Switch

  • QUALITY MATERIAL - The tattoo pedal switch is made of high quality ABS which makes it heat resistant, resistant and tough. This tattoo foot switch is durable and reliable, soft silicone cable is uneasy to break. The first choice of professional tattooists!.
  • HUMANIZE COMBINATION - Professional tattoo foot pedal with 5'ft silicone clip cord and standard 1/4 phono plug. Making the tattoo machine power on fast and easily. It is very flexible that perfect for power supply, machine guns, tattoo supplies and tattoo kits..
  • EXCELLENT DESIGN - Yangna tattoo foot switch design for superior ankle comfort and the touch switch design is easy to control. The groove at the top makes the foot switch pedal base with anti-skid. It is durable, and convenient to carry and use..
  • EASY TO USE - The tattoo foot switch and tattoo clip cord are easily connect your machine & power supply. The touch switch design, with your foot slight touching it,it will make the tattoo machine power on. It suit for all kinds of tattoo machines and power supply use..
  • SATISFACTION GUARANTEE - We are dedicated to providing our customers with affordable, premium tattoo foot pedal switch. If you are not satisfied for any reason simply email us and we will replace or refund your purchase when you order ....
Check Stock

M Series Battery Disconnect Switch, 300A Marine Battery Cut Off Switch 48V Power Kill Switch Isolator Single Circuit Battery Shut Off Switch for Car Vehicle RV Trailer Marine Boat Solar

  • 【Battery Disconnect Switch】All boats and vehicles with an engine have at least one battery in order to start the engine and providing power for loads such as lights, electronics etc. This battery isolator switch is used for 48V DC systems to isolate and secure the electrical system, to achieve safe switching between batteries, loads, and charge sources..
  • 【Premium Material】The battery cut off switch is made of ABS plastic housing and Tin-plated Copper studs, which could contribute to maximum conductivity, protecting wiring from dirt, corrosion and rain..
  • 【Safety】Our marine battery switch meet CE Certification and ABYC requirements, one-piece terminal stud design never loosens over time. External ignition protection makes it safe for installation aboard gasoline powered boats..
  • 【Easy Operation】Battery disconnect switch with On/Off position. Switch ON=Power to closed circuit, Switch OFF = No power to the cut-off circuit..
  • 【Wide Application】This red battery disconnect switch could be used as a power cut off, greatly appliacable for RV, travel trailer, marine, boat, hull, camper, solar panel and emergency power battery pack etc, Eliminating any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
Check Stock

5Sets Magnetic Reed Switch, Magnetic Door Switch/Magnetic Contact Switch/Normally Open Closed NC NO Door Alarm Window Security, for DC 5V 12V 24V Light (Black-B31)

  • 【Product Name】:Magnetic Switch,Type:B31,Color:Black,Material: Anti-fire ABS,Net Weight: 20g..
  • 【Contact Type】: NC/NO/COM,Trigger Range:10-20mm..
  • Contact Capacity: 500(mA) (Maximum Switch Current).
  • Rated Power: 10W(Maximum Switch Power),This switch cannot exceed the DC12v power supply..
  • 【Safety Protection】:3V-12v magnetic switch It is suitable for windows, doors, cabinets etc. Ideal for door, window security..
  • 【Package Content】5 Sets Magnetic Swith, Size: 55X12.5X11.5mm / 2.17" x 0.45" x 0.45"(L*W*H) a package of screws for mounting on wood only..
Check Stock

Digilent Pmod ISNS20: 20A Current Sensor

  • 【FUNCTION】Adjustable DC current induction switch is a switch output detection, monitoring and protection product developed by using advanced non-sourced power supply (only for alternating current) technology.
  • 【IDEAL CHOICE】Compared with the traditional transformer and thermal protector, the current induction switch has the advantages of high accuracy, stable performance and long service life, it is an ideal choice for automatic industrial control equipment and power monitoring.
  • 【APPLICATION】Widely used in substations, variable frequency speed regulation devices, frequency converter devices, electrolytic plating, electric locomotives, street lamp monitoring, coal mines and other automation industries that require current monitoring.
  • 【PRINCIPLE】The current induction switch uses the principle of electromagnetic mutual inductance of current for safety, introduction, and convenience to monitor or detect the current of electrical equipment.
  • 【TWO TYPES】The switch type is normally open and normally closed, you can choose the appropriate product according to your needs, the startup time is less than 0.1 seconds. The shell material is fireproof ABS, which is safer to use.
Check Stock

AC Current Switch SZC03-NC-AL-CH Adjustable Current Sensing Switch for Fflash Buzzer Relay and Single-Chip AC 0.5-200A

  • HIGH QUALITY: The shell of current sensing switch is made of self-extinguishing ABS material for long lifespan, durable and safe to use. It has traight-through structure design, isolation withstand voltage up to 2000V, powerful and reliable. Hysteresis is less than 1% and can be used under strong magnetic conditions..
  • GOOD PERFORMANCE: The switch can open and close without limitation, and the reaction speed reaches the ms level, quick response and low power consumption..
  • ADJUSTABLE: This adjustable switch with a potentiometer is self-powered, no external power supply required. Action current 0.5-200A AC..
  • WIDE APPLICATION: The switch is widely used for monitoring current in substations, variable frequency speed control devices, inverter devices and other electric equipment..
  • CONVENIENT: The high-power MOS tube contactless electronic switch is equipped with LED indicator which can conveniently and intuitively indicate the working status of the switch..
Check Stock

SinLoon RJ45 Splitter Selector Switch, 2 Ports Network Switch Splitter Selector Hub 2-in 1-Out or 1-in 2-Out 100M t 2-Way RJ45 Ethernet Network Push Button Metal Mini Switch Box

  • All in One: Nintendo switch dock is equipped with 1*Gigabit Ethernet Port, 1*HDMI port, 2*USB 2.0 port, 1*USB-C power port and 1*switch button. Ethernet port provides wired and stable network for games. HDMI port can connect with external large screen HD devices for 4K, 1080P output, such as TV, Monitor and other HDMI display devices. USB-C power port is a power supply interface, connecting external 15V/2.6A power adapter. (Original Switch AC adapter is suggested).
  • Wired Network for Stable Games: With the charging dock for nintendo switch, Playing games and charging can go at the same time. After connected the switch dock to TV with HDMI cable and AC adapter plugged in, then Switch will be recognized immediately. Ethernet cable can be connected if needed after place the console onto the dock. Pressing the button to convert the TV mode needs wait 5-10s for high-definition game pleasure..
  • One Key to Switch: Switching mode between console and TV display freely and easily in seconds, by just pressing the button on the dock. Nintendo Switch Docking Station allows you to enjoy games in a larger screen for 4K display. It is normal for the black screen on Switch when switching to TV mode. Before games, please connect the original switch AC adapter. LED light s....
Check Stock

Hazard Warning Switch, For Defender 90 110 Hazard Warning Lamp Switch YUF101490

  • HIGH QUALITY MATERIALS: Warning Lamp Switch uses high quality ABS material, which is stamped by die once. The switch made is not easy to crack, super durable..
  • EXCELLENT PERFORMANCE: Stable characteristics, high reliability. Lamp Hazard Warning Switch undergo a rigorous life test, running evenly normal..
  • SIMPLE INSTALLATION: Reference OE YUF101490, direct Replacement For the old or broken one. Perfect match for the original car, easy to install..
Check Stock

Battery Switch, Briidea 12V-48V Battery Disconnect Master Power Cut-Off Switch for RV, ATV, Car, Marine Boat, UTV, Vehicles and Camper (ON/Off)

  • MATERIAL: Our battery switch made of ABS plastic, housing to resist the harsh marine conditions, durable made of safety use.
  • EASY OPERATION: This RV battery switch is easy to install, with ON/OFF position in green and red color labels. Switch ON is means Power (green), Switch OFF is means No power (red).
  • COMPATIBILITY: The marine battery disconnect used for DC 12-48V system to isolate and secure the electrical system, can stand alone or be locked together with other switch.
  • SAFE PROTECTION: Battery isolator switch comes with CE certified, rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts.
  • WIDE APPLICATION: Our Briidea battery switch is widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, and electrical equipment's switch.
Check Stock