Reviews 915mhz Reader

Intel D915GAGL Intel 915G Socket 775 micro-ATX Motherboard w/Video, Audio & LAN

  • Intel D915GAGL Intel 915G Socket 775 mATX Motherboard General Features: Intel 915G chipset.
  • mATX Form Factor Socket 775 architecture Supports 800/533 MHz Front Side Bus.
  • Supports up to 4 GB DDR 400/333 MHz RAM Intel Graphics Media Accelerator 900.
  • Intel High Definition integrated audio Integrated 10/100 Fast Ethernet LAN.
Check Stock

915MHz ESP32 LoRa 0.96 OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with WiFi LoRa 32 V2

  • The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery..
  • When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending.
  • 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage..
  • You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna..
  • If you got the V2, it should be the one returned by others ordered long time ago. Please confirm it with DIYmalls as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Signalplus 12dbi Omni-Directional Antenna 824-960MHZ-Outdoor LoRa Antenna 868mhz 915mhz for Verizon AT&T Sprint with 32ft SMA Cable

  • Support RAK2 Nebra Bobcat EasyLinkIn Syncrob helium miner . It can enhance the signal strength and signal coverage, and make miner get more witnesses....
  • Frequency ：824MHz - 960MHz.support 915mhz .Gain : 12dbi (915mhz )，higher the gain ,more suitable for miner ,get more witnesses and more hNT....
  • Must be connected via 50-ohm coaxial cable to a modem / router / gateway / access point / booster / radio device. Does not improve signal for phones....
  • Antenna are made by high quality material, it can significantly enhance the use range and signal transmission capability of your mobile radio..
Check Stock

La Crosse Technology TX29UDTH-IT Wireless Temperature and Humidity Sensor

  • Wireless thermo-hygro sensor for use with compatible La Crosse Technology 915 MHz weather stations.
  • transmits to a receiver at 915 MHz frequency from up to 330 feet unobstructed.
  • Assesses outdoor temperatures from -39.8 to 139.8 degrees F and relative humidity levels of 1 to 99 percent.
  • Requires separate purchase of a compatible base and 2 AA batteries.
  • mount with provided bracket in sheltered location.
  • Measures 1-1/2 inches wide by 5/6 inch deep by 5 inches high.
Check Stock

La Crosse Technology TX27U-IT 915 MHz Wireless Temperature Sensor with LCD

  • Wireless outdoor temperature sensor for use with La Crosse Technology 915 MHz weather systems with IT technology.
  • transmits to a receiver at 915 MHz frequency from up to 330 feet unobstructed.
  • Assesses outdoor temperatures from -39.8 to 139.8 degrees F.
  • Requires separate purchase of a compatible base and 1 CR2032 cell battery.
  • mount with provided bracket in sheltered location.
  • Measures 1-1/2 inches wide by 1/2 inch deep by 3-1/2 inches high.
Check Stock

Ecowitt WH68 Wind Speed and Direction Sensor - Accessory Only, Can Not Be Used Alone

  • ...ather Services】: Except for uploading the data to our ecowitt server, WS68 Anemometer can also supports uploads to WU/WeatherCloud/WOW. The sensor history graph of your WU station ID can be viewed on the WSView Plus/ Ecowitt App..
  • 【Long Transmission Range】: the sensor data is transmitted every 16.5 seconds via 915 MHz wireless signal up to 330 feet (100 meter) range.
  • solar powered outdoor sensor and needs 1 AA battery( NOT Included) as backup power..
  • 【Please Note Before Purchase】①This WS68 Wireless Solar Powered Anemometer is a sensor ONLY, No display, Could Not Be Used Alone. It needs to work with the Wi-Fi gateway(sold separately) or HP2551/HP2561/WN1900/HP3501 display console(sold separately) after Wi-Fi configuration. ②This WS68 sensor is 915 MHz, requiring the receivers pairing with it are 915 MHz too. The sensor and display console should be at the same frequency..
Check Stock

ThermoPro TP60S Digital Hygrometer Indoor Outdoor Thermometer Wireless Temperature and Humidity Gauge Monitor Room Thermometer with 200ft/60m Range Humidity Meter

  • ... Application: Indoor/outdoor hygrometer wireless ensures proper temperature and humidity control, which has important health benefits, thermometer digital can be placed in baby room, nursery, cellar, basement, warehouse and greenhouse.
  • Additional sensors: There are two versions: TP60 with 433MHz sensor and TP60 with 915MHz sensor. Because the frequency is different, please double check your purchased sensor's frequency and then get the right additional sensors. Search B072BY1M2V for 433MHz sensors, and B0BHQSR2RK for 915MHz sensor.
Check Stock

ThermoPro TP62 Indoor Outdoor Thermometer Wireless Weather Hygrometer, 200ft/60m Range Temperature Humidity Sensor, Backlight Indoor Room Thermometer for Home Greenhouse Garden

  • ...t settings with 3 front facing buttons instead of taking the device off the wall or fridge to change settings.
  • Place smart thermometer for room temperature anywhere with the tabletop stand, wall-mountable and magnetic back design.
  • Additional sensors: There are two versions: TP62 with 433MHz sensor and TP62 with 915MHz sensor. Because the frequency is different, please double check your purchased sensor's frequency and then get the right additional sensors. Search B072BY1M2V for 433MHz sensors, and B0BHQSR2RK for 915MHz sensor.
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

Intel D915GAG Intel 915G Socket 775 micro-ATX Motherboard w/Video Audio & LAN

  • Intel D915GAG Socket 775 mATX Motherboard General Features: Intel 915G chipset mATX Form Factor.
  • Socket 775 533/800 MHz Front Side Bus (FSB) Supports up to 4 GB DDR Non-ECC RAM (DDR333/DDR400).
  • Intel Graphics Media Accelerator 900 Intel High Definition integrated audio Integrated 10/100 LAN.
  • One (1) UDMA/33/66/100 IDE controller One (1) floppy disk controller Four (4) SATA/150 ports.
Check Stock

ECOWITT HP3501 TFT Wi-Fi Weather Station with Solar Powered Wireless Anemometer, UV & Light Sensor, Self-Emptying Rain Collector, Color Graph Display, Weather APP and PC Software

  • ...w the current weather condition directly via our free WSView Plus or Ecowitt APP..
  • 【PC Software】: enables you to connect the display console to a Windows computer/laptop via USB cable(included), allowing you to remotely view and analysis your weather conditions..
  • 【Please Note Before Purchase】: This product is 915 MHz ( The products we sells in US/CA are all 915 MHz.
  • The European are all 868 MHz；The Australia are all 433 MHz. ).
Check Stock

NemaTech Premium Multi-Room Remote Control IR Extender and Repeater Solution (Wireless)

  • 【INDUSTRIAL GRADE 】Built with quality components for maximum durability.
  • 【HIGH-TECH WIRELESS 】Advance 915 MHz RF with FSK modulation utilizing 20KHz to 60KHz full bandwidth IR frequency range for continuous, no noise, instant response without interference.
  • 【WIRELESS】 - 915 MHz RF with FSK modulation utilizing 20KHz to 60KHz full bandwidth IR frequency range.
  • 【MAXIMUM COMPATIBILITY】 - Works with most TVs, Satellites, DVD Players, Cable Boxes, Audio Components, Wi-Fi Devices, Smart Speakers and all infra-red devices.
  • 【EXTRA LONG RANGE】Wirelessly transmit more than 200 meters / 650ft extending your remote's reach without interference.
  • 【ULTRA COMPACT】 World's smallest remote control IR extender/repeater kit 1.77 x 1.77 x 0.59 inches.
  • 【CONTROL MULTIPLE DEVICES】Extend as many devices as you have, within the transmitting range of your infrared devices.
  • 【EXTRA LONG RANGE & CONTROL MULTIPLE DEVICES 】 – Wirelessly transmit more than 200 meters / 650ft extending your remote's reach without interference and being able to extend as many devices as you have, within the transmitting range of your infrared devices.
  • 【PACKAGE INCLUDE & 1YEAR WARRANTY 】 1 x Transmitter, 1 x Receiver, 2 x Power Adapters, IR Receiver and Emitter Cables, Owne....
Check Stock

Waterproof Replacement 5.8dBi Long Range Cellular 915MHZ LoRa Gateway Antenna with 3M/10FT Cable for Helium Hotspot RAK RAK2 Nebra Bobcat 300 SenseCAP M1 SyncroB.it Hotspot Finestra HNT Miner，Eifagur

  • Applications Include: Long Distance LoRa Nodes, LoRaWAN, Applications, Indoor/Outdoor RAK V1 V2 Nebra Bobcat EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only）.
  • Antenna Connector: N Male Connector: Cable: N Female to RP-SMA Male with 3Meter KSR200 Cable.
  • Adapter: RP-SMA Female to SMA Male Adapter: Direction: Omni-directional.
  • Package List: 1 x Antenna Kit, 1 x 10FT KSR200 Cable,1 x Adapter (As the Picture Shown).
  • Note: The installation mast is not included.
  • Installation reminder: If it is used outdoors, we recommend that you install it in an open place, please keep it as vertical as possible, install the antenna at the highest place outdoors to get a better signal. if it is used indoors, we recommend placing this inside near a window..
  • Note: the longer the cable, the greater the gain loss for the antenna, If you need a longer cable, We recommend buying MORE THICKER LOW LOSS cable and suitable length of cable (must be 50ohm) , If want to get more witnesses..
  • If the witness is down or there is no change, when using this antenna for the first time, ....
Check Stock