Reviews 80mm Nozzle

Alyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)

  • [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
  • [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
  • [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
  • [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
  • [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check Stock

Heat Gun Accessory Kit

  • Includes 49-80-0292 Hook Nozzle, 49-80-0293 Deflector Nozzle, 49-80-0294 Air Spreader Nozzle, 49-80-0297 Air Reduction Nozzle.
Check Stock

SKD RV Tech 10pcs Brass Misting Nozzles, 1/4 Inch Mister Nozzles Thread Misting Nozzle Tees for Outdoor Misting Cooling System Replacment.Misting Parts & Accessories

  • It only uses one half gallon per hour per nozzle..
  • Thread size: 4mm(diameter)*5mm(length) , 3/16" pitch. Note : this is a high Pressure mist nozzle , the Pressure is 20-80kg/cm.
  • features a sturdy brass body with stainless steel orifice.
  • Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Check Stock

KUWAN 30pcs Brass Misting Nozzles for Cooling System 0.023\ (0.6 mm) 10/24 UNC Garden (0.023)

  • Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
  • High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
  • Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
  • Minimal water use of 1/2 gallon of water per hour per mist nozzle.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.008\ (0.2 mm) 10-24 UNC

  • 22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
  • This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
  • It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
  • Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
  • Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).
Check Stock

homenote 10 Pack Brass Misting Nozzles for Outdoor Misting Cooling System, Suit for 1/4” Tubing

  • Quantity: 40PCS Brass Misting Nozzles For Outdoor Cooling System.
  • The misting nozzle is made of a sturdy brass with stainless steel orifice.
  • Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min..
  • Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle..
Check Stock

Pack-42 WS OEMed KP2062-3B1 Nozzle Tip KP2063-1B1 Electrode KP2065-1 Drag Cup Fit Lincoln PRO-Cut Plasma Cutting Torch

  • The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
  • There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
  • The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
  • The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
  • All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.
Check Stock

TIMBERTECH Multi-Purpose Airbrush Set, AG-183K Dual-Action Gravity Feed Airbrush Kits with 0.3/0.5/0.8mm Needles, 2/5/13CC Fluid Cup for Cake Decorating, Painting, Tattoo, Models Art

  • Elite Airbrush Nozzle Set Design(Screw out or on by hand).
  • 3 sizes of screw on gravity fluid cups: 2ml, 5ml and 13ml.
  • 3 different size of nozzle: 0.30mm, 0.50mm(Mounted) and the 0.80mm.
  • Sprays light to highly viscous coating materials while ensuring a high flow of color with a different spray pattern.
  • Great for Fine Art, Nail Art, Temporary Tattoos, Cake Decorating, Hobbies, Crafts, Car Graphics, etc. Please note that the airbrush needs air compressor to get to work..
Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Gray)

  • 【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
  • 【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / – 0.03 mm, 1 KG Spool (2.2lbs)..
  • 【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
  • 【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..
Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Black)

  • 【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
  • 【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / - 0.03 mm, 1 KG Spool (2.2lbs)..
  • 【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
  • 【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..
Check Stock

GOLF Perfume Atomizer, 6Pcs 5ML Mini Refillable Empty Perfume Atomizer Bottle, Refillable Perfume Spray, Scent Pump Case, Perfume Atomizer for Travel Outgoing

  • Material: PET (Polyethylene Terephthalate) inner container & metal shell,lightweight and durable aluminum material makes it ideal for placing in your handbag or pocket.
  • Package included:6pcs perfume spray bottles（Blue/Silver/Rose Pink/Red/Green/Gold）.
  • How To Use:Before the bottom filling bottle is filled with liquid, please open the lid, spray several times according to the nozzle, discharging the gas in the bottle,insert the nozzle of your perfume bottle into valve at the base of atomizer,after filling, spray a few times to accelerate the closure of filling port. Don’t be too full, just fill a little bit above the window.
Check Stock

PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent

  • ①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
  • ④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
  • ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
Check Stock