Reviews 800kva 1500kva

10Pcs Audio Transformers 600:600 Ohm 1:1 EI14 Isolation Transformer

  • 5kVA STEP-DOWN ISOLATION: 5kVA 5kW transformer converts UPS, utility, generator or other 208V input to 120V for powering low-voltage AC components..
  • 12-OUTLETS: It features 12 NEMA 5-15/20R outlets for connecting equipment with common NEMA 5-15P and NEMA 5-20P plugs. Four resettable 20A circuit breakers protect your low-voltage equipment against overload conditions. One NEMA L6-30R outlet supports high-voltage output. The 5kVA transformer’s 10-foot power cord with 208V 30A input connects to a NEMA L6-30R outlet..
  • 2U INSTALLATION: Hardware is included for mounting this 208V to 120V isolation transformer in 2U of space in an EIA-standard 19-inch 4-post rack with a maximum depth requirement of 20.75 inches..
  • TAA-COMPLIANT UPS: The voltage transformer is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases..
  • SU5000XFMR2UTAA SmartOnline Step-Down Isolation Transformer.
Check Stock

APC American Power Conversion Smart-UPS 3000VA LCD Rackmount 2U 120V Battery Backup & Surge Protector with SmartConnect, 459 Joules

  • American Power Conversion (APC) Smart-UPS 3000VA LCD Rackmount 2U 120V Battery Backup & Surge Protector with SmartConnect – CD with PowerChute Business Edition Software – Documentation CD – Installation Guide – Rack Mounting Hardware – Rack Mounting Support Rails – Smart UPS Signaling RS-232 Cable – USB Cable – American Power Conversion (APC) 3 Year Warranty for UPS and 2 Year Warranty for Battery.
  • Output Power Capacity: 2.7KWatts / 2.88kVA.
  • Max Configurable Power: 2.7KWatts / 2.88kVA.
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

ZENY MIG130 Gas-Less Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask AC Current 60 AMP – Commercial Grade – 110 V

  • 【Solid Construction】– ZENY MIG 130 welding machine is compact and exquisite MIG welder is constructed of high-quality durable steel, fully painted body can withstand rust and wear, a strong and durable welding machine for your long-term use.
  • 【Flux-Cored Wire, Gas Less Welder】– This welder machine uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. Automatic Thermal Safety Protection, Ideal for welding mild steel, stainless steel..
  • 【 Adjustable Feeding Speed】– ZENY MIG welder features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. It also features a wire feeding speed adjust rotary knob, 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • 【Widely Applications】– It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specifications for This Welder】– Frequency : 50/60HZ/ Max absorbed power (KVA): 3.6/ Absorbed power 60% (KVA): 1.1, Power factor:0.9, Flux wire diameter (MM): 0.8-0.9, Max Open Voltage: 37V/ Current range (A):50-90.
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Tripp Lite 1000VA Smart Online UPS 800W Double-Conversion 2U Rackmount Extended Run & Network Card Options USB DB9 2 Year Warranty & $250,000 Insurance SU1000RTXL2UA

  • 1kVA 800W Uninterruptible Power Supply (UPS) with true online operation, pure sine wave output, expandable runtime and hot-swap batteries.
  • slot for Network Management Card options.
  • 100/110/120V +/-2% output at 50/60Hz, high efficiency economy mode option.
  • 6 AC outlets (2 individually controllable) plus tel/Ethernet line protection.
  • 2-Year Limited Warranty and $250,000 Ultimate Lifetime Insurance for connected equipment.
Check Stock

A Restaurant in Jaffa

  • APC Smart-UPS SRT 96V 3kVA RM Battery Pack.
  • Design that delivers high availability, scalability, and for maximum flexibility and price/performance.
Check Stock

Tripp Lite 1000VA Smart UPS Back Up, Sine Wave, AVR, 120V 800W Line-Interactive, 1U Rackmount, USB, DB9, ENERGY STAR, 2 & 3 Year Warranties, $250,000 Insurance (SMART1000RM1U)

  • 1kVA 800W UPS Battery Backup Uninterruptible Power Supply with AVR, Pure Sine Wave output (battery mode) & LEDs.
  • 120V NEMA 5-15P input with a 10 ft. cord, 6 NEMA 5-15R outlets- 2 switched load banks.
  • USB, RS232, EPO and slot for Network Management Card options (See Tripp Lite’s SNMPWEBCARD).
  • Corrects brownouts and overvoltages from 83V to 147V.
  • Supports a half load of 400W up to 14 min..
  • 2-Year Warranty (3-Year with registration) & $250K Ultimate Lifetime Insurance for connected equipment.
Check Stock

Extech 382075 True RMS 2000A AC/DC 3-Phase Clamp-on Power Analyzer

  • Measures, computes, and displays 3-Phase power on balanced or unbalanced loads.
  • Display Lead/Lag current/voltage phase shift in Degrees.
  • Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz.
Check Stock

Extech PQ2071 True RMS 1/3 Phase 1000A AC Power Clamp Meter

  • Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector.
  • Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power.
  • Measures 1-Phase/ balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh),plus Power Factor/ Phase Angle.
  • Large dual backlit LCD display (9999 count) with bargraph.
Check Stock

APC SMT2200RM2U Smart-UPS 2200VA 1980W 120V LCD Rackmount 2U Battery Power Backup Renewed

  • Output power capacity: 1.92kWatts / 1.92kVA.
  • Output Connections: (6) NEMA 5-15R & (2) NEMA 5-20R, 120V.
  • Input Connections: NEMA 5-20P, 120V, Cord Length: 8.01ft.
  • Topology: Line interactive / Waveform type: Sine wave.
  • Battery Cartridge: RBC43 Included, Brand new Internal Batteries..
Check Stock

APC SRT5KRMXLT 5000VA 208V 4800W On-Line Double Conversion SRT Smart-UPS L6-30P

  • Load Capacity: 5kVA / 4.8kW - 208V AC 3U Rack-mountable.
  • Receptacles: 2 x NEMA L6-20R, 2 x NEMA L6-30R.
  • Environmental Certification: RoHS, ENERGY STAR, REACH.
  • Height-5.1in, Width-17in, Depth-28.32in / Weight 123 lb.
Check Stock

Acme Electric T181054 Open Core and Coil Industrial Control Transformer, 240V x 480V, 230V x 460V, 220V x 440V Primary Volts, 120V/115V/110V Secondary Volts, 0.5 kVA

  • Style: Enclosed - Encapsulated Core & Coil.
Check Stock