Reviews 6degree Chamfer

TAJIMA Drywall Chamfer - 180mm Sheetrock Trimming Tool with Adjustable 30 Degree Chamfer & Die-Cast Aluminum Base - TBK180-V30

  • 30 DEGREE CHAMFER TOOL - Fluorinated coating applied to aluminum base glides smoothly over materiel producing a flawless chamfered edge on drywall and....
  • SLIP RESISTANT ELASTOMER GRIP - Tajima's chamfer tool features an integrated, slip-resistant grip enhancing usability and safety.
  • DIE-CAST ALUMINUM BASE - Designed with a lightweight yet durable aluminum chassis, this Tajima tool will withstand the rigors of daily professional....
  • ADJUSTABLE CHAMFER - Tajima's chamfer tool features and adjustable chamfer edge ranging from 1mm - 4mm for flexibility on the job..
  • SUPERIOR JAPANESE CONSTRUCTION - Built with durability and quality in mind, Tajima's chamfer tools offer both thoughtful form and functionality that....
Check Stock

Inch External Chamfer Inspection Tool Chamfering Welding Gauge

  • [FUNCTION]External Chamfering Inspection Tool can measure internal or external chamfer.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure of 0-2in, 1/32in increments,+-1/64in accuracy.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
  • [MATERIAL]The Chamfer Tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [PORTABLE]The Chamfer Gauge is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
Check Stock

Arrows Before Bullets (8-Bit)

  • Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
  • Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
  • High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
  • Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
  • Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

JIUNENG 2-in-1 Pneumatic Chamfer Tool,Mini Pneumatic Chamfering Machine Set,Portable Handheld Metal Edge Beveler with Replace Blades for Metal Deburring,45 Degree Arc

  • 【Easy Operation】: This 45-degree mini chamfering machine air tools has a new lightweight design, Two right-angle cutter heads and bearings have been installed on the machine, and two R-angle cutter heads are also equipped.Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
  • 【Stable Speed】: This portable trimming chamfering tool can withstand high impact and high speed. The speed is increased and the chamfer is smoother with US 1/4 inch metal filter, free speed: 30000 RPM, air consumption 0.4/min..
  • 【Durable】: Pneumatic chamfering tool with 1-5 air intake adjustment, freely adjust the gear speed you need. The safety switch is used to prevent accidental touch to protect the user's safety at all times. Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
  • 【Higher Efficiency】: The upgraded version of the metal beveling grinder, the new design adopts a new chrome-plated all-aluminum shell with high-quality bearings and blades for smoother deburring and chamfering..
  • 【Application】:JIUNENG's air beveler tool adopts the thinnest nut lock bearing at present, which can chamfer in the narrowest and shallowest space, an....
Check Stock

W.S Chamfer Gage Chamfering Ruler External Chamfered Inspection Tool Chamfering Gauge Stainless Steel 0-30mm

  • [FUNCTION]External Chamfering Tool can measure internal or external chanfer,Used in mechanical manufacturing, glass processing and other fields.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure range of 0-30mm, 0.5mm increments,+-025mm accuracy.
  • [PORTABLE]The Chamfer Tool total length of 65mm,width 26mm.
  • is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
  • [MATERIAL]The welding inspection tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
Check Stock

Utoolmart HSS 40mm Dia 90 Degree Chamfer Milling Cutter Countersink Router Bits 1pcs

  • Package Content : 1 x Chamfer Milling Cutter.
Check Stock

Utoolmart HSS 20.5mm Dia 90 Degree Chamfer Milling Cutter Countersink Router Bits 1pcs

  • Package Content : 1 x Chamfer Milling Cutter.
Check Stock

Cle-Line C66719 Quick-Set 2-Piece Die System

  • Two-piece construction with two cutting edges in each piece.
  • One side has a 2 to 3 thread chamfer for threading.
  • the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66702 Quick-Set 2-Piece Die System

  • Two-piece construction with two cutting edges in each piece.
  • One side has a 2 to 3 thread chamfer for threading.
  • the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66715 Quick-Set 2-Piece Die System

  • Two-piece construction with two cutting edges in each piece.
  • One side has a 2 to 3 thread chamfer for threading.
  • the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66710 Quick-Set 2-Piece Die System

  • Two-piece construction with two cutting edges in each piece.
  • One side has a 2 to 3 thread chamfer for threading.
  • the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
  • Unified and American National thread form standard.
Check Stock