Reviews 6 way Signal Amplifier

BOSS Audio Systems AR2000M Monoblock Car Amplifier - 2000 Watts, 2-4 Ohm Stable, Class A-B, Mosfet Power Supply, Gray

  • Power - 2000 watts Max X 1 @2-ohms, 1000 watts Max X 1 @4-ohms.
  • Class A/B topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
  • Low/high level inputs - a low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Variable low-pass Crossover - subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Variable bass Boost - bass Boost allows you to adjust the low bass within the boost Range to just the way you like it.
  • Variable gain control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Dimensions - 13.13 x 6.5 x 2.8, weight - 3.81 lbs. It can be installed in a variety of different places due to its slim and Compact design.
  • Warranty - BOSS Audio provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.Com. We strongly encourage professio....
Check Stock

AudioControl LC-6.1200 125W x 6 Car Amplifier

  • Configurable as 6/5/4/3/2 channel amplifier.
  • 6 x 200 watts @ 2 ohms - 6 x 125 watts @ 4 ohms.
  • 400 watts @ 4 ohms bridged - AccuBASS Processing.
  • MILCTM Maximum Input Level Control - GTO Signal Sense - 6 preamp inputs.
  • 3-way Independent Linkwitz-Riley Alignment crossovers - 2 assignable preamp outputs - PFM Subsonic Filter.
Check Stock

AudioControl LC-6.1200 125W x 6 Car Amplifier

  • Configurable as 6/5/4/3/2 channel amplifier.
  • 6 x 200 watts @ 2 ohms - 6 x 125 watts @ 4 ohms.
  • 400 watts @ 4 ohms bridged - AccuBASS Processing.
  • MILCTM Maximum Input Level Control - GTO Signal Sense - 6 preamp inputs.
  • 3-way Independent Linkwitz-Riley Alignment crossovers - 2 assignable preamp outputs - PFM Subsonic Filter.
Check Stock

Rockville 6-Zone Amplifier+ 10 8 2-Way White Ceiling Speakers for Restaurant

  • Package Includes: (1) Rockville RCS180-6 180 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth. (5) Pairs of Rockville CC80T White 8"....
  • Rockville RCS180-6350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of....
  • USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max). Separate volume control for....
  • 5 segments signal level indication. Built in cooling system keeps component cool at all times. (2) Sets RCA AUX inputs. (3) Mic inputs. RCA Line....
  • A Weighted Signal to Noise (@ 1W) -68.1dBA. A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA. Frequency response: 49Hz to 14.9....
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 2250W RMS 4500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable.
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 1125 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock

CeKay Outdoor Digital HD TV Antenna with High Gain and Low Noise Amplifier for UHF/VHF - Long Range, 40FT RG6 Coaxial Cable, 2 Way Splitter, Easy Installation - Upgraded Version

  • 【Easy to Installation】 Just connect the amplifier to the antenna and TV or STB box, then plug into the USB port for getting power, HD digital TV antenna amplifier works with any non-amplified indoor tv antennas. The number of channels reception will vary depending on your surroundings and how far away you are from broadcast towers..
  • 【Signal Booster】 The Digital TV Antenna Amplifier has build-in 4G LTE Filter, blocks 3G and 4G wireless signals, it will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers..
  • 【High Performance With Low Noise】 This Amplifier has very good performance to strengthen the signal received by digital tv antenna. It improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital hdtv with very low noise!.
  • 【Warmly Reminder】If your house is very close to the broadcast tower and the signal is already very strong, we do NOT recommend using this amplifier/booster, if your stations are far away t....
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer with Passive Return, F59 Terminators (Lindsay LSA84-EQ8)

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality..
  • Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz..
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems..
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal..
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV recepti....
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • The RP-2000.1D is one of the most popular amplifiers ever released from Skar Audio and for good reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Powe....
Check Stock

The Night Orion Fell A Survival Story

  • Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way....
  • Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier....
  • Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual....
  • Low/High Level Inputs – The multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. A low level (RCA) input is....
Check Stock

Alpine R-A90S R-Series 6/5/4/3 Channel Power Amplifier with Staggered Power

  • 6-channel car amplifier, 75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms, 100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms, 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohms.
  • GTO (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input.
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier.
  • Staggered power amplifiers are perfect for a 3-way front-stage setup,and work great for a front/rear/sub stereo as well..
Check Stock

Rockville RCS350-6 350 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth

  • Rockville RCS350-6 350 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth.
  • Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19″ Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8 ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 6-Zones – each zone has a separate volume control. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max)..
  • Sd card slot to play music stored on an SD card (32GB max). separate volume control for Mic1, Mic2, Mic3, MP3, line1, line 2, and MP3. Echo control for the mic inputs with speed and repeat adjustments. Built in clipping limiter to protect the amp and speakers. Bass and tremble control. Chime button for making announcements. Top quality aluminum panel with industrial grade knobs. 5 segments signal level indication. Built in cooling system keeps component cool at all times.
  • (2) sets RCA aux inputs. (3) mic inputs. Rca line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. Shared negative speaker output terminal. ..
  • Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -....
Check Stock

Rockville Bluetooth Multi Room 6 Zone Home Audio System w/(14) Ceiling Speakers

  • Package Includes: (1) Rockville RCS180-6 180 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth. (7) Pairs of Rockville CC65T White 6.5" Commercial 70v Ceiling Speakers For Restaurant. Includes: Amplifier. Remote. Rack mount ears. Power Cable. FM Radio antenna. Owners manual. Warranty. Applications: Restaurant. Bar. Caf. School. Lounge. Home (Multi-zone, Multi-room). Office. Warehouse. Features:.
  • Rockville RCS180-6350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 volt, 8ohm, and 4 ohm. 70/100 volt RMS Power: 184 Watts. 4-16 ohm binding post speaker output. 6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth audio streaming. FM radio tuner.
  • USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max). Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3. Echo control for the mic inputs with speed and repeat adjustments. Built in clipping limiter to protect the amp and speakers. BASS and Treble control. Detachable euro-block speaker output terminals for easy ins....
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 140x2 RMS @2 Ohms, 50x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you ....
Check Stock