Reviews 5 8 Inch Tubing

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

uxcell Flaring Tools Set Hydraulic Tube Flare Kit 45 Degree Eccentric Cone Head

  • FLARING RANGE - (Including Inch and Metric Die) Inch: 1/4-inch to 3/4-inch(1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch).
  • CLUTCH FUNCTION - The clutch in the handle limits over-tighten the flare..
  • ECCENTRIC CONE HEAD - 45 Degree Eccentric Head producing 45 Degree flares in soft copper, brass and aluminum tubing..
  • CONVENIENT - A single clamp screw provides for east clamping and removal of tubing. Package also contains a reamer and a tube cutter for your....
  • EASY STORAGE - Plastic carrying case for neat storage..
Check Stock

Klein Tools 88910 Mini Tube Cutter

  • For 1/8-Inch to 5/8-Inch (3 mm to 16 mm) copper and aluminum tubing.
  • Requires only 1-3/8-Inch (35 mm) swing radius.
  • Not designed for cutting stainless steel or hard tempered tubing.
  • Replacement blade available, Cat. No. 88905.
Check Stock

Maxline M6026 Tubing Kit, 1/2-Inch x 100-Feet

  • of 1/2-Inch Tubing, Debar and Cutter Tool.
  • 175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.
  • maximum from the air compressor, up to 2000 sq..
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • ...and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instructions for use.
  • PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & metric tu....
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

Wostore Eccentric Flaring Tool Kit Tubing Refrigeration 7 Dies 3/16-3/4 inch Copper

  • 【Practical Tool】Create 45 degree precise flares in soft copper, brass, aluminum and mild steel tubing.
  • 【Available Sizes】For flaring 7 dies size: 3/16,1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 -inch sizes..
  • 【Convenient Operation】A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort, easy to operate..
  • 【Uniform Flares】Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow.Produces a rolling action for uniform flare walls without galling in tubing..
  • 【Securely & Safely Stored】Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability..
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

RIDGID - CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver & 32920 Model 15 Screw Feed Tubing Cutter, 3/16-inch to 1-1/8-inch Tube Cutter

  • Product 1: Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing.
  • Product 1: Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts.
  • Product 1: Rollers include grooves for close-to-flare cuts.
  • Product 1: Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity.
  • Product 2: Easily executes clean, square cuts on copper, brass, aluminum and thin-wall steel.
  • Product 2: Large, ergonomic X-CEL knob provides a firm grip so you can cut tubing quickly and easily.
  • Product 2: Features a convenient fold-away reamer to clean and insure a better connection.
  • Product 2: Tubing cutter has a 3/16-inch to 1-1/8-inch (5 mm to 28 mm) cutting capacity.
Check Stock

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter , Gray

  • Cuts up to 1” schedule 40 pipe and 2” copper tubing,.
  • Tubing capacity is 5/8" - 2-1/8" and 1" pipe..
  • Tubing cutter wheeled can be replaced with item # 42348.
  • Cuts and deburrs a wide variety of pipe and tubing..
Check Stock