Reviews 5 0 Inch Tft- BestItemr.com

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and....

19-inch Dell 1908FPt LCD Monitor w/USB 2.0 Hub General Features: Stylish black and silver design.
19-inch Active matrix TFT LCD Display 1280 x 1024 maximum resolution 5:4 aspect ratio.
800:1 contrast ratio 300 cd/m2 brightness 5 ms response time.
160 /160 (horizontal/vertical) viewing angle 16.7 million Colors, 72% color gamut supported.

5” Inch Digital TFT LCD Color Monitor Screen for Car Rear View Parking Backup Camera, Camera not included, Monitor Only.
Anti-glare High Resolution,800(RGB)X480, 5-inch TFT LCD screen with excellent color.
Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
Perfect companion product for a Chuanganzhuo’s backup camera,Automatically starts when the car back up, video opened at the same time.
Package content:1 x 5″ TFT LCD Monitor.

Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz.
Large capacity lithium battery power supply.
Supporting DC Resistance and Electrolytic Capacitance Measurement.
Automatic Recognition of Component Measurement.
Support screening and deviation measurement.
2.8-inch TFT display, 4-bit semi-display.
Display digit: Main parameters: 5 bits, secondary parameters: 5 bits.
Adjustable measuring speed, manual and automatic range.
Short circuit correction with open circuit.
Standard configuration:1. Mini-USB cable.
Adjustment of backlight brightness, Chinese and English are optional,USB device and automatic power-off time.

Test frequency: 100Hz, 120Hz, 200Hz, 400Hz, 800Hz, 1KHz, 2KHz, 4KHz, 8KHz, 10KHz.
Testing level: Six fixed level(0.1V, 0.3V, 0.6V, 1V, 1.5V, 2V).
Signal source output impedance: 30Ω , 100Ω.
Test Parameter: Principal parameter: L/C/R/Z, Secondary parameter: X/D/Q/θ/ESR.
Supporting DC Resistance (DCR) and Electrolytic Capacitance Measurement.
Data recording function (maximum, minimum, average).
With open circuit and short circuit calibration function.
Comparator sorting (5 gears), alarm function..

⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
⭐【Satisfying After-Sales Support】If you have ....

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with 2.4-inch oversized color dot matrix TFT，especially suitable for fast pairing of transistors, identification of mixed，surface mount and wordless components, and preliminary screening of small batch components..
The oscilloscope has a real-time sampling rate of 2.5ms/s, a broadband of 200kHz, a 2.4-inch TFT high-definition color screen, a complete trigger function (single time, normal, automatic) and can measure the voltage signal up to ± 400V. It is equipped with an 80kHz / 5.0V PWM wave test signal source with adjustable duty cycle, and is equipped with a funny one button auto. The measured waveform can be displayed by simple adjustment.
The oscilloscope has small volume, integrated support, free contraction, can rotate 90 degrees, does not occupy space and is convenient to carry. At the same time, it has built-in 1500mah rechargeable lithium battery and polymer lithium battery cell, which can continuously supply power for 240 minutes, which is safer and more lasting.
The crystal detector can automatically detect the pin definition and automatically analyze the infrared code of NEC protocol, automatica....