Reviews 48 port Optical Fiber Splicing

FIREPOWER 1444-0872 MST 220i 3-in-1 MiG, Stick and Tig Welding System, 210 Amp Max Output, 3/8\ Max Plate Thickness, 7,500 Watt Generator, 208/230 VAC, DC Output

  • ---Fiber Optical Joint Machine Fiber Welder whole kit, Three warranty and whole life support, Ship from USA.
  • ---9 seconds Splicing time Fusion Splicer.
  • ---0.02dB Splicing Loss Optical Fiber Fusion Splicer.
  • ---Core Alignment Joint Machine Fiber Welder with stripping tool.
  • ---6 Motors Core to Core alignment fusion splicer with fiber cleaver.
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

Digital Audio Optical Audio Switch 2 in 1 Out, SGEYR Digital Optical Audio Splitter SPDIF Toslink Switch Optical Switcher with IR Remote Control & Optical Cable for PS3 Xbox Blue-Ray HDTV

  • 【Digital Audio Optical Cable Splitter】Two ways of optical fiber SPDIF Toslink signals switch to one sets of optical fiber signal receiving device. Optical splitter makes with metal material for sturdy and anti-interference. Plug and Play. Powered audio optical splitter is more stable than passive SPDIF/TOSLINK splitter(Please supply power before use, or use a signal source to supply power). Comes with a 5V power adapter for stedy charging.
  • 【Long Output Distance】Lossless sound quality transmission. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m/130ft. With Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Digital optical switches can be Selected via IR Remote Control(Included) or Button on the Switch.
  • 【Support Audio Format】Optical cable splitter support LPCM2.0 / DTS / Dolby-AC3, 32kHz, 44. 1kHz, 48kHz and 96kHz. Optical fiber audio aplitter does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD. Support Signal Retiming.
  • 【Widely Compability】The input port work with two Optical audio signal, such as PS3, PS4, Xbox, Blue-Ray DVD, HDTV, STB, Xbox, TV box, DVD player, and More. The output work with one sets of optical audio signal receiving device such as soundbar/digital amplifer, di....
Check Stock

MikroTik Gigabit Ethernet Smart Switch with PoE-out and RouterOS L5 CRS112-8P-4S-IN

  • CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE.
  • Four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.
  • There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately).
  • CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices).
  • Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is [email protected] and [email protected].
Check Stock

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

  • NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter：100-1000μm, Cladding Diameter：80-150μm..
  • 【5” TFT DISPLAY】- It adopts 5-inch 800x480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine.
  • 【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
  • 【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
  • 【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..
Check Stock

Tripp Lite 24 Port Gigabit Ethernet Switch with 12 Outlet PDU, 2 SFP Ports (NSU-G24C2)

  • Combines a Basic PDU and an Unmanaged 24-Port Gigabit Ethernet Switch with 2 SFP uplink ports in 1U rack-mount design.
  • 1.44kW 12A 120V Basic Power Distribution Unit (PDU) with 12 NEMA 5-15R AC outlets.
  • 2 Combo SFP (Mini-GBIC) ports for uplink to other switches via optical fiber.
  • Auto-negotiable 10/100/1000 Mbps Ethernet on all ports.
  • 48 Gbps switching capacity at Full-Duplex.
Check Stock

Fiber Optic Fusion Splicer with 4.3-inch Touch Screen, Optical Fiber Fusion Splicer Kit Features 7s Splicing and 18s Heating- 6481 Series

  • Key Technical Facts Matter – 1) 4 high precision motors.
  • 2) 7s fast splicing, 18s highly efficient heating.
  • 4) 5mm fusion for ultra-short cleave length.
  • 6) 300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records storage.
  • Easy to Operate, Wide Compatibility – 1) 4.3-inch touch screen with graphical interfaces for smooth operation.
  • 2) All-in-one fixture meets fusion demands of multiple optical fibers, jumpers and rubber-insulated wires.
  • 4) Multiple fusion modes and heating modes are available.
  • Other Features – 1) High Precision Ceramic V-groove and ceramic presser foot, ensure fiber loading becomes more convenient and accurate, also easy for clean and maintenance.
  • 2) Intelligent Heat Shrink, the heater won’t work until the fiber is detected by the embedded sensor to avoid scalding.
  • Pluggable large-capacity lithium-ion battery – 6800mAh built-in battery satisfies 220 times of splicing and heating, good for longer field work.
Check Stock

Jonard Tools RST-8514 FTTH Riser Cable Slitting Tool

  • [Professional Design]: Fibrlok Fiber Optic Mechanical Splice is designed to accommodate 250-900µm buffer sizes..
  • [Features]: Fibrlok Fiber Optic Mechanical Splice is known for its low reflection characteristics of -35dB and has a thermal stability of -40°C to 80°C.
  • [Easily installed]: High rate of success for installation and easy installation, the average connecting time is 150 seconds.
  • [Application]: Applicable for optical fiber splicing and restoration for damaged lines.
  • fiber axial solid fit, reducing the performance degradation caused by the loss of matching fluid.
Check Stock

RadioShack Toslink™ to Mini Toslink Cable (6-Ft.)

  • 【Bridge Between You and Music】WARRKY Optical Cable allows you to connect sound bar and home theatre system to your TV, PS4, PlayStation, XBox, and more devices with standard Toslink (s/PDIF, optical, optic) ports. Outperform than your previous optical audio cable. The right fiber optic cable for crystal and clear sound..
  • 【Top-Notch Fiber Core】This 6 ft Digital Optical Audio Cable adopts fiber cores from TORAY, Japan for zero distortion digital audio stream. Ideal for uncompressed PCM audio, compressed 5.1 to 7.1 surround sound systems including Dolby Digital Plus, DTS-HD High Resolution and LPCM. Turn your living room to home theater..
  • 【Ultra Durability】Carefully-chosen nylon material is much more durable than plastic cable. Flexible and lightweight. CL3-rated. Safe for in-wall installation. Aluminum case and gold-plated connector make sure this optical audio cable remain the best performance even after thousands times of using..
  • 【Secure & Snug Connection】Extra thicker gold-plated layer and anti-losing buckle enable this Digital Audio Optical Cable fits standard Toslink (s/PDIF, Optical) port snugly. Thoughtful rubber cap and cable tie help you store this fiber optics cable easier. Free from dust accumulation. Better connector protection....
Check Stock

LiNKFOR Digital Optical Audio Switch Splitter 3 in 2 Out Optical Switch & Splitter 3X2 Aluminum Alloy for HDTV PS3 Include Remote and Optical Cable

  • 【3 In 2 Out Optical Switcher Splitter】This LiNKFOR tosLink digital optical audio switcher splitter can let the users to connect 3 digital optical tosLink sources switch to 2 optical tosLink (SPDIF) input on your sound bar, optical bluetooth transmitter at the sametime..
  • 【Support Audio Format】Notice Support DTS-HD / Dolby-trueHD / LPCM2. 0 / DTS / Dolby-AC3 / DSD , 32kHz, 44. 1kHz, 48kHz and 96kHz, It does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD, because 7. 1CH audio cannot be transmitted via fiber optic cable and must be transmitted over HDMI cable..
  • 【Voltage Protection】Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine. （Plug in the USB cable and take power from the output device's USB port or charger. 5V 1A power adapter）.
  • 【Widely Compability】Use for PS3 XBOX DAC Converter Blue-Ray DVD HDTV STB.
  • 【Including 1pcs 6. 5ft Optical Cable】Come with One pcs Optical Cable, No Additional Purchase, Convenience for using..
Check Stock

FosPower (10 Feet 24K Gold Plated Toslink to Mini Toslink Digital Optical S/PDIF Audio Cable with Metal Connectors & Strain-Relief PVC Jacket

  • [OPTICAL MINI TOSLINK TO TOSLINK CABLE] Mini 3.5mm Toslink/optical cables will NOT convert digital audio signals (optical/Toslink) into analog signals or the other way round. This is not an analog to digital converter cable. OPTICAL cables will NOT plug into standard 3.5mm headphone jack and convert analog audio signals into digital audio with optical light. It is specifically used to transmit digital (optical) audio only..
  • [COMPATIBLE DEVICES] The optical 3.5mm connector mini TOSLINK cables are made for specific devices such as iMacs, TVs and Notebooks that have a built in 3.5mm OPTICAL port. iPhones/smartphones do NOT have optical 3.5mm ports.
  • [PREMIUM FIBER CORE AND METAL CONNECTORS] Low-loss, low-jitter, maximum signal transfer, precision polished fiber core eliminates RF, EM, and ground loop interference. Metal connectors dampen vibration.
  • [24K GOLD-PLATED FERRULES & STRAIN-RELIEF PVC JACKET] Resist corrosion, reduce tarnish, and provide maximum protection for the fiber tip. Quality PVC jacket contributes to the OD5.0mm strain-relief construction that not only provides flexibility, but also protects the cable from kinks..
  • [LIMITED LIFETIME WARRANTY] Includes a Limited Lifetime Warranty.
Check Stock

FosPower (3 Feet) 24K Gold Plated Toslink to Mini Toslink Digital Optical S/PDIF Audio Cable with Metal Connectors & Strain-Relief PVC Jacket

  • [OPTICAL MINI TOSLINK TO TOSLINK CABLE] Mini 3.5mm Toslink/optical cables will NOT convert digital audio signals (optical/Toslink) into analog signals or the other way round. This is not an analog to digital converter cable. OPTICAL cables will NOT plug into standard 3.5mm headphone jack and convert analog audio signals into digital audio with optical light. It is specifically used to transmit digital (optical) audio only..
  • [COMPATIBLE DEVICES] The optical 3.5mm connector mini TOSLINK cables are made for specific devices such as iMacs, TVs and Notebooks that have a built in 3.5mm OPTICAL port. iPhones/smartphones do NOT have optical 3.5mm ports.
  • [PREMIUM FIBER CORE AND METAL CONNECTORS] Low-loss, low-jitter, maximum signal transfer, precision polished fiber core eliminates RF, EM, and ground loop interference. Metal connectors dampen vibration.
  • [24K GOLD-PLATED FERRULES & STRAIN-RELIEF PVC JACKET] Resist corrosion, reduce tarnish, and provide maximum protection for the fiber tip. Quality PVC jacket contributes to the OD5.0mm strain-relief construction that not only provides flexibility, but also protects the cable from kinks..
  • [LIMITED LIFETIME WARRANTY] Includes a Limited Lifetime Warranty.
Check Stock

Cablecc Dual Port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 in 2 Out Black

  • CY Dual Port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 in 2 Out Black Color.
  • 2port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 In 2 Out.
  • It allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television.
  • Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder.
  • 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen vibration, giving you the ultimate listening experience.
  • Digital optical One divides into two Splitter for CD/DVD PS3 X-Box360 Computer..
Check Stock