Reviews 45 degree Straight Thread Elbow

Hilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)

  • ...ity Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
  • 【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
  • We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
  • 【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • 【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfaction..
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

GM Genuine Parts 42626074 Turbocharger Intercooler Hose, Black

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.C.
Check Stock

C CLINK Brass Plated with Nickel Chrome Amp Input Reducer 1/0 to 4 Gauge Wire Reducer 2pcs

  • Home / Engine / Engine Cooling / Coolant Hose & CAC / Silicone Elbows (45 Degree) / 7896-225, Silicone Hose Elbow (45 Degree) - 2 1/4".
Check Stock

Glarks 156Pcs Metric & SAE Straight and 45 Degree and 90 Degree Hydraulic Grease Brass Zerk Grease Nipple Fitting with 60Pcs M6 M10 Caps Assortment Kit

  • ☀ [What You Get]: This kit includes 12 sizes of Metric and SAE grease fittings, M6 x 1 straight for 10pcs, M6 x 1 90-degree for 7pcs, M6 x 1 45-degree for 7pcs, M10 x 1 90-degree for 10pcs, M10 x 1 45-degree for 7pcs. 1/8''-27 straight for 10pcs, 1/8''-27 45 degree for 7pcs, 1/8''-27 90 degree for 7pcs, 1/4''-28 straight for 10pcs, 1/4''-28 45 degree for 7pcs, 1/4''-28 90 degree for 7pcs. Red(M6) caps for 30pcs, black (M10) caps for 30pcs. Total 156pcs which are sorted packed in a plastic box..
  • ☀ [Premium Material]: Grease fittings are made of high-quality brass. Not only the surface is clean and shiny, but also anti-corrosion and anti-rust. They can work for a long time, use them to replace damage zerk fittings, and you will no longer have to worry fitting loss or damage..
  • ☀ [Strong Tightness]: The thread on the grease fittings is clean, tidy and deep, which can ensure that fitting is tightly engaged with grease lines, and prevent the fitting from fulling off or oil leaking form the side..
  • ☀ [Grease Fitting Cap]: Red (m6), black (m10) caps are included in the kit, different colors are convenient for you to distinguish. They can prevent dust, dirt and other pollutants from entering the nozzle, thereby extending the life of the grease fittin....
Check Stock

2wayz - 45° Metal Hose Elbow, Hose Adapter, Hose Angle Connector, Water Hose Shut Off Valve, Heavy Duty

  • NO LEAKING: We added bolts and threads to the 45 degree elbow, creating the ultimate longest lasting elbow! For a perfect hose connector in your household!.
  • NO KINKS: Maneuverability in tight spaces. Whether you have a too-small RV water compartment, you need to extend your recessed spigot, the 45° angle is perfect for tight spaces. The unique 45° angle is great for situations which the 90° is too abrupt, and you want the more gradual angle turn. Heavy duty connector with 003c0.007% lead in the alloy..
  • 360 SWIVEL, OPTIMIZED FOR CONVENIENCE: Our garden hose with shut off valve is swiveling a full 360°, you can easily access the elbow. Effortlessly attach and remove hoses from spigots which are too close to the ground, and use your hands to completely tighten the garden hose elbow to your faucets. No tools needed for the installation of the 45 degree hose adapter..
  • NO STIFFENING: Unlike most shutoff knobs which stiffen with age, you will always be able to easily and smoothly rotate our elbow's long (4cm!) shut off knobs. Also, we coated the elbow with an ANTI SLIP TPR rubber, allowing you to grip it even when your hands are wet! Benefit from the shut off valve!.
Check Stock

8Pcs Universal Aluminum Intercooler Piping U-Pipe Black Kit with T-Bolt Clamps and Black Coupler (8Pcs 2.5 Inch)

  • 2.5 Inch Upgrade Replacement Performance Turbo Charged Kit Made of High Quality Light Weight T6061 Aluminum.
  • Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI).
  • Perfect for All Turbo DIY Project,Increases Up to 65% Air Flow Compared to Standard Bent Piping.
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

Brennan 6801-08-08-NWO-FG Forged Steel JIC Flared Tube Fitting, 90 Degree Elbow, 1/2\ Tube OD JIC Male x 3/4-16 Male Straight Thread O-Ring Boss

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Fitting connects to tubing on one end and a male straight thread O-ring boss on the other.
  • Forged steel for weldability, rust resistance, and durability.
  • For use with tubing that is flared 37 degrees for tight seal.
  • Operating temperature range from -63 to 400 degrees F.
Check Stock

5 Pack 45 Degree Ell Central Vacuum Fitting

  • 5 pack of central vacuum 45 degree elbow.
Check Stock

8Pcs Universal Aluminum Intercooler Piping U-Pipe Black Kit with T-Bolt Clamps and Black Coupler (8Pcs 3 Inch)

  • 3 Inch Upgrade Replacement Performance Turbo Charged Kit Made of High Quality Light Weight T6061 Aluminum.
  • Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI).
  • Perfect for All Turbo DIY Project,Increases Up to 65% Air Flow Compared to Standard Bent Piping.
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock