Reviews 45 degree Elbow

2wayz - 45° Metal Hose Elbow, Hose Adapter, Hose Angle Connector, Water Hose Shut Off Valve, Heavy Duty

  • NO LEAKING: We added bolts and threads to the 45 degree elbow, creating the ultimate longest lasting elbow! For a perfect hose connector in your household!.
  • NO KINKS: Maneuverability in tight spaces. Whether you have a too-small RV water compartment, you need to extend your recessed spigot, the 45° angle is perfect for tight spaces. The unique 45° angle is great for situations which the 90° is too abrupt, and you want the more gradual angle turn. Heavy duty connector with 003c0.007% lead in the alloy..
  • 360 SWIVEL, OPTIMIZED FOR CONVENIENCE: Our garden hose with shut off valve is swiveling a full 360°, you can easily access the elbow. Effortlessly attach and remove hoses from spigots which are too close to the ground, and use your hands to completely tighten the garden hose elbow to your faucets. No tools needed for the installation of the 45 degree hose adapter..
  • NO STIFFENING: Unlike most shutoff knobs which stiffen with age, you will always be able to easily and smoothly rotate our elbow's long (4cm!) shut off knobs. Also, we coated the elbow with an ANTI SLIP TPR rubber, allowing you to grip it even when your hands are wet! Benefit from the shut off valve!.
Check Stock

5 Pack 45 Degree Ell Central Vacuum Fitting

  • 5 pack of central vacuum 45 degree elbow.
Check Stock

MaxLine Rapid Air 45 Degree 1/2' NPT Pipe Thread Brass Street Elbow Fitting 50131

  • This is a solid brass street elbow that features 1/2" male NPT threads on one side as well as 1/2" female NPT on the opposite side..
  • This part is produced by RapidAir for the 3/4" MaxLine air piping systems outlets to install an air coupler at a 45 degree angle, but can be used for other applications as well..
  • 1/2" Threads Measure about 3/4" in diameter if measured with a tape measure..
Check Stock

Bykski Tools Kit Set for Water Cooling Rigid PETG Tubing Cut System Mandrels Heat Gun Saw File (14mm OD 45° 90° 180° PETG Bending Tool)

  • support outside diameter 12mm/14mm/16mm acrylic hard tube..
  • Use for 45 degrees, 90 degrees, 180 degrees bending..
  • When using, please put the preheated acrylic tube in the elbow mold for elbow treatment..
  • Do not heat the heat source directly to the elbow mold..
Check Stock

OneTigris Tiger Roar Tent Stove Portable Wood Burning Stove for Winter Camping Hunting and Outdoor Cooking Pipes Included.

  • VERSATILE TENT STOVE: Ideal for outdoorsmen for winter camping trips and outdoor cooking purposes. An essential camping gear keeps you warm in hot....
  • MATERIAL: Made up of stainless steel and German Schott ROBAX heat resistant glass.Stove body forged from #304 stainless steel，chimney/elbow pipes....
  • INCLUDES：Tent stove body, 7 sections of stove pipe-length 11.4",2 sections of 45 degree elbow pipe, 2 sections of 90 degree elbow pipe,1 pair of....
  • WOOD STOVES SPECS：Dimension-17.3"x8.5"x10.6"(Packed) |Fire Box Size:7"x8.2"x15.3"=878.2in³ | Weight:9.6kg/21.2lb | Pipe diameter:6.0mm/2.36inch.
  • NOTE: Fuel Type-Dry seasoned wood only. Gloves are recommended to be worn when assembling,disassembling or using to avoid cut/burn injuries..
Check Stock

Central Vacuum 4-Inlet Installation Kit 100 feet of Pipe All in a Box

  • ✅ Fits all brands: Nutone, Honeywell, Ultra Clean, Prolux, Beam, Electrolux, Eureka, Hayden, Allegro, AirVac, Vacuflo, MD & many more.
  • ✅ You will receive 4 X STANDARD NEW DESIGN TRENDY FULL DOOR VALVES INLET WALL VALVE, white color, 4 X Mounting Plate (for the valves), 12 x 90 Degree Sweep Elbow, 8 x 45 Degree Elbow, 12 x Stop Coupling (to join the 2” pipe together).
  • ✅ 3 x 90 “Y”, 4x 90 Sharp Elbow, 8 x pipe strap, 1 x wire (125 ft), 1 x Solvent Cement (125 ml).
  • ✅ 100 ft Pipe (in 4 ft lengths) - Central Vacuum Standard 2" O.D. PVC pipe. - Printed centre-line is provided for ease of installation.Low internal surface air friction. - ASTM F-2158 Approved. This item is offered in a box of 100 foot. - The actual pipe length is 48" (121 cm).
  • ✅ Amazon's choice for suggested central vacuum package (not included in this listing) is shown in one of the pictures: https://www.amazon.com/dp/B01ND02528.
Check Stock

Central Vacuum Complete Electric Package with Allegro Unit 3 Inlet Kit

  • ✅ Manufacturer's Suggested Retail Price (MSRP): $US 1199.99. Allegro Power Unit with All Steel 5.7 inch Ametek Lamb Blower Motor. 5 Year Manufacturer's Warranty..
  • ✅ Electric Carpet Powerhead Wessel-Werk Made In Germany - Set of Steel Chromed Locking Wands with Cord Management - 3-Way Switch Deluxe 30 foot Electric Hose - Hose Cover 30 foot length - Central Vacuum Exhaust Muffler.
  • ✅ Set of Accessories: Tool Bag, Dusting Brush, Floor Tool, Crevice Tool, Upholstery Tool with Slide-On Brush, Plastic wands, and Metal Hose Hanger.
  • ✅ Installation Kit: 3 x Inlet Valve - White The Wall Inlet Valves are equipped with the low voltage connections for remote turn ON/OFF, 3 x Mounting Plate (for the valves), 9 x 90 degree Sweep Elbow, 6 x 45 degree Elbow, 6 x Stop Coupling (to join the 2" pipe together).
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

The End: Fuck Christmas

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

OWI Inc Hydraulic Arm Edge Kit DIY STEM STEAM Robot Arm

  • Step away from the grid - Hydraulic Robotic Arm - No Electricity or batteries needed.
  • Discover hydro-mechanical technology and have fun operating your own hydro-mechanical robotic arm.
  • Removal the gripper and activate the suction apparatus. Enables operators to "vacuum" and lift objects.
  • 6 Axes of movement: Gripper opens to 1.89 inches, Wrist rotation 180 degrees, Wrist mobility 98 degrees, Elbow range 44 degrees, Base rotation 270 degrees, and shoulder motion 45 degrees.
  • Detailed graphic illustrations equate to successful kit building. - OWI products are made in Taiwan and include assembly instructions only in English. Other items not matching these descriptions are illegal copies.
Check Stock

Bosch Parts 2608040070 Rotary Handle

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 5/16\ x 5/16\ Flare

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • 45-degree flared construction for a stronger connection than soldered.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -65 to 250 degrees F.
  • Suitable for copper, brass, aluminum, and steel tubing.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock