Reviews 45 Ton Lifting Capacity

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

  • Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
  • Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
  • Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
  • Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
  • Diverse Application: This hydraulic bottle jack with ....
Check Stock

K Tool International 2 Ton Extra Low Profile Service Jack; Long Pump Handle, Dual Pump Pistons, Hydraulic Ram Protection, Heavy Duty Steel; KTIXD63105

  • [2 TON CAPACITY]- 2 ton capacity extra long low profile service jack for easy access under low ground clearance vehicles.
  • [LIFT RANGE]- Lift range from 2.75" to 24" provides users with variable lifting capabilities.
  • [LONG PUMP HANDLE]- 45.25" long pump handle for easy pumping under load.
  • [DUAL PISTONS]- Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load.
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity and over extension of ram.
Check Stock

LSXLSD 2000 Lbs-3000 Lbs 10M Automatic and Manual Winches, Hand Tools (Color : 3000lbsx10M)

  • 4 ton (8818 lbs.) pulling capacity, 2 ton (4409 lbs.) lifting capacity..
  • Warning: Not designed for overhead lifting..
Check Stock

BIG RED T82001S Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands and Blow Mold Carrying Storage Case, 2 Ton (4,000 lb) Capacity, Red

  • Combo kit includes: (1) 2-ton trolley jack, (1) jack handle, (2) 2-ton jack stands, and (1) blow mold case.
  • 2-ton trolley jack features 360-degree rotating saddle, positive locking safety release handle, and rear swivel casters.
  • Integrated overload protection valve prevents you from lifting items weighing more than the jack's capacity.
  • Jack stands have automatic locking pawl and tooth design for extra protection.
  • Trolley jack rated up to 4,000 pounds capacity with lifting range of 5.5-inches to 13.4-inches.
  • jack stands rated to 4,000 pounds capacity with support range of 10.8-inches to 16.5-inches.
Check Stock

2 Ton Heavy Duty Floor Jack, Lifting Range 5-1/8\ to 13\

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

K Tool International 63103A 2 Ton Automotive Trolley Floor Jack for Garages, Repair Shops, and DIY, Portable, Compact, 4,000 lbs. Capacity, Hydraulic Lifting Range 5.125" - 13", Heavy Duty Steel, Red

  • [2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs..
  • [LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs..
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity..
  • [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
  • [MANEUVERABILITY] - Swivel rear casters and saddle provide smooth maneuvering and positioning.
Check Stock

Industrial & Scientific 600-3000lbs x 8/15m Winch hand tool Crank Gear Winch Boat truck auto hand self-locking manual winch Hand lifting sling Industrial & Scientific (Color : 2500LBS)

  • 2 ton (4409 lbs.) pulling capacity, 1 ton (2204 lbs.) lifting capacity..
  • Warning: Not designed for overhead lifting..
Check Stock

OTC HDJ10P 10 Ton Air / Hydraulic Heavy Duty Service Jack with 3 Position Locking Handle and 6-3/8" to 22" Lifting Range

  • OTC's HDJ10P is a rugged, steel frame, 10-ton capacity service jack with three position (from horizontal to vertical), locking, spring-loaded handle, that brings the versatility of air-assist operation to your shop’s lifting tasks.
  • Ideal size for heavy duty lifting jobs such as vocational vehicles, highway maintenance, delivery and service fleets, bucket trucks, school buses and community transit vehicles.
  • Easy to maneuver, with a foot pedal that quickly positions the saddle to the lift point.
  • Connects to 80-120 PSI shop air supply for effortless lifting of heavy loads.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram and contaminant preventing wiper seals.
  • Roller (front) and ball (rear) bearing wheels provide stability and allow easy maneuvering.
  • Specifications: 6-3/8 to 22 inch lifting range, 106.2 inch reach, 6 inch diameter round saddle, 9.8 inch frame height, 45.4 inch handle length, 4 casters: 5.6 inch fixed front (2), 3.6 inch mid-body swivel (2), weighs 293 lbs..
Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • ...which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-sales service to replace it..
Check Stock

VEVOR Hydraulic Long Ram Jack, 3 Tons/6600 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Black

  • Handles up to 3-Ton/6600 lbs: This 3-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 3 ton/6600 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

Portable Hydraulic Ram Welded Bottle Jack with Carrying Case, 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton Capacity-Blue (5 TON)

  • 【CAPACITY】- Choose from 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton load capacity. Max Pressure: 200PSI. It is powerful to be a jack tool for automotive repair and emergency..
  • 【INDEPENDENT CYLINDER】- Built-in two rugged wear-resistant steel rings, the piston rod and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • 【RUGGED ROD & SPRING】- Rod features flexible adjustment of height, strong pressure resistance and corrosion resistance. The spring has compact structure, fast retraction and long service life..
  • 【SPLICING HANDLE】- Two handles that can be connected to each other are easy to storage and use. They are easy to use and have a lift valve to ensure reliable internal oil circuit..
  • 【WIDE APPLICATION】- For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications, and environments where the equipment receives heavier abuse..
Check Stock

Portable Hydraulic Ram Welded Bottle Jack with Carrying Case, 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton Capacity-Blue (2 TON)

  • 【CAPACITY】- Choose from 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton load capacity. Max Pressure: 200PSI. It is powerful to be a jack tool for automotive repair and emergency..
  • 【INDEPENDENT CYLINDER】- Built-in two rugged wear-resistant steel rings, the piston rod and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • 【RUGGED ROD & SPRING】- Rod features flexible adjustment of height, strong pressure resistance and corrosion resistance. The spring has compact structure, fast retraction and long service life..
  • 【SPLICING HANDLE】- Two handles that can be connected to each other are easy to storage and use. They are easy to use and have a lift valve to ensure reliable internal oil circuit..
  • 【WIDE APPLICATION】- For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications, and environments where the equipment receives heavier abuse..
Check Stock