Reviews 45 Degree Pipe Tap Set

Oatey 14052 Retro Master 0.25\-5.75\ Pipe Diameter Roof Flashing 8\ x 8\ Base, Black

  • Slides over pipe - for pitch to 45 degrees.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Continuous Temperature Resistance to 212 Degree F. Intermittent Temperature Resistance to 275 Degree F..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

FGJQEFG 3 Inch DIY Custom Mandrel Exhaust Pipe Tube Pipe, 40 Inch Straight Pipe, 3''OD Straight & Mandrel Bend Pipe(45/90 Degree) Kits, T304 Stainless Steel, Universal Fitment - 3PCS

  • 【Material】Universal DIY Custom Mandrel Exhaust Tube Pipe Made of High-Quality T-304 Stainless Steel, Strength and longer life, Excellent resistance to corrosion and oxidation resistance..
  • 【Size】Outside Diameter: 3 Inch / 3'', Bending Angle: Straight/45/90 Degree..
  • 【Easy To Use】Construction to maintain OD/ID size integrity for easier installation, Polished pipe is great for DIY project..
  • 【Package Includes】1 X Straight Tube Pipe, 1 X 45 Degree Tube Pipe, 1 X 90 Degree Tube Pipe(100% Brand new, Never been tried or installed). Efficient packaging to save on non-box and oversize fees..
  • 【Applications】Universal Fitment(Exhaust system or industrial materials). Easy for common exhaust systems. (Professional installation is highly recommended, Instruction is not included)..
Check Stock

Squirrelly 3' Inch Stainless Steel Mandrel (2 Pack), High Quality 45 Degree Bends Angles Turbo Custom Exhaust System Fabrication Shops Piping

  • Squirrelly create high quality products and solutions with the same bootstrapped mentality upon which our company was founded. We are early adapters of new technology, utilizing cutting edge manufacturing processes to deliver a superior product..
  • Squirrelly 45 degree stainless steel mandrel bent pipe is designed and fabricated in MN, USA..
  • This 45 degree mandrel bent is made of 304 stainless steels 16-gauge raw finish..
  • The measurements for this stainless steel pipe is measure by 3″ inch diameter with the length of 5 1/2″ long..
  • Package includes: 2x 3″ Mandrel Bend 45 Degree 304 Stainless Steel Mandrel Bent Piping.
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Universal 2.5 Inches OD DIY Custom Pipe Kits, Straight & 45 / 90 Degree & U-Bands, 16-Pieces, Mild Steel

  • Product Description - These are DIY custom pipe with 2.5" depth flared slip fit end..
  • Best Replacement - Come with set of [4] 90 degree pipes, [4] 45 degree pipes, [4] 180 degree u-bends and [4] 48" straight pipes, can make the replacement for your old and rust pipe..
  • Extraordinary Quality - It is constructed of high quality mild steel construction with mandrel-bends for strength and rust-resistant, to ensure an extremely long lasting operate life..
  • Brilliant Characteristic - It is high performance racing design with slip fit, joint to provide easiest fabrication, can maximize smoothest high exhaust air flow rate..
  • Product Specification - Overall Diameter: 2.5" | Inlet / Outlet: 2.5" OD | Flange Type: Slip-Fit | Thickness: 16 Gauge.
Check Stock

Universal 2.5 inches OD DIY Custom Mandrel Pipe Kits, Straight & 45/ 90 Degree & U-Bends, 16-Pieces, Stainless Steel

  • Product Description - These are DIY custom pipe with 2.5" depth flared slip fit end..
  • Best Replacement - Come with set of [4] 90 degree pipes, [4] 45 degree pipes, [4] 180 degree u-bends and [4] 48" straight pipes, can make the replacement for your old and rust pipe..
  • Extraordinary Quality - It is constructed of high quality stainless steel construction with mandrel-bends for strength and rust-resistant, to ensure an extremely long lasting operate life..
  • Brilliant Characteristic - It is high performance racing design with slip fit, joint to provide easiest fabrication, can maximize smoothest high exhaust air flow rate..
  • Product Specification - Overall Diameter: 2.5" | Inlet / Outlet: 2.5" OD | Flange Type: Slip-Fit | Thickness: 16 Gauge.
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

GM Genuine Parts 42626074 Turbocharger Intercooler Hose, Black

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.C.
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock