Reviews 40mm M Fan

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

NewHail 5V M.2 2280 SSD Heatsink with 40mm PWM Cooling Fan + 3X 4.5mm Heat Pipe SSD Cooler for M.2 2280 NVMe & SATA SSD Only Thermal Pad Included 5V Fan

  • 5V M.2 Heatsink combines active and passive cooling, temperature is reduced and ensures long-lasting performance.
  • Compatibility Note---This is a 5V fan and Not the typical 12V that basically all motherboards use.
  • Compatible with both single-sided and double-sided....
  • 3 x 4.5mm Copper Heat Pipe---3 x 4.5mm Copper Heat Pipe, the heat produced by M.2 2280 SSD will be absorbed by the heat pipe and effectively conducted....
  • Larger 40MM PWM Cooling Fan---With Larger 40MM Quiet PWM Cooling Fan (9 blades powerful fan,5V / 8500rpm).Low noise level at max rate 8600RPM rapidly....
  • Package List---1x NewHail 5V M.2 SSD Cooler for M.2 2280 NVMe & SATA SSD (Note: M.2 2280 SSD is Not Included!).
Check Stock

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90

  • Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
  • In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
  • The fan clutch wrench removed the lock nut on the hot-tack fan..
  • The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..
Check Stock

Performance Tool W80498 GM Fan Clutch Wrench for Vehicle Maintenance in Garages and Workshops, Black/Red, 19 in

  • ◇ For the purpose to remove water pump on models with temperature dependent viscosity drive fans.
  • ◇ Fan Clutch Wrench removes lock nuts on the thermo-Viscous fans.
  • ◇ Fan Clutch Holder allows the technician to hold the water pump pulley in place while loosening the radiator fan.
  • ◇ Suit for:M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.
Check Stock

Yemtuls Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Work with Air Compressor Pump

  • Fan clutch wrench is designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
  • This fan clutch removal tool kit allows user to hold the water pump pulley in place while loosening the radiator fan.
  • Size: 32mm (1.26"),Wrench is 15" long, Holder is 15.75" long. Specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts, letting you service your timing or water pump quickly and easily.
  • Compatible for M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.
  • Constructed from high strength steel for durability and a long life.
Check Stock

EASYUSE 2-Piece Fan Clutch Wrench Set,Removal Tool for BMW, Mercedes, Ford and Other Engine Models,Fan Clutch Nut Wrench & Water Pump Holder

  • [DURABILITY]:Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
  • [COMPATIBILITY]:Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • [INCLUED]:1 pc Wrench, 1pc Fan Clutch Holder.
  • [DESIGN CONSIDERATIONS]: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
  • [EASY TO USE]: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan..
Check Stock

ARES 15027- Cooling System Refill Kit - Easily Test for Leakage in Cooling System - Change Coolant Quickly - Works with Most Radiator and Coolant Bottlenecks

  • Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan.
  • Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench.
  • If you need to remove the reverse threaded fan,this fan clutch wrench Worked great, made the job of replacing the radiator so much easier..
  • This 2-Piece Fan Clutch Wrench Set is a necessary option if you are going to remove your thermostat or water puimp. Cut my job in more than half the time without it. I recommend that anyone this job needs this tool and the combo set makes it a brainier.
Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

  • CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
  • HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
  • GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
  • each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
  • EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
  • SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.
Check Stock

Prokomon 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit for BMW E34 E39 E36 E46 E90

  • DESIGN CONSIDERATIONS: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
  • DURABILITY: Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
  • COMPATIBILITY: The ARES Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to, the following applications: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, and S50B32..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Fan Clutch Wrench Set, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck

  • PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
  • BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
  • WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
  • WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check Stock

Aluminum M.2 2280 SSD Heatsinks with 20mm Fan Powerful Cooling for PCIE NVME or SATA M.2 SSD Cooler

  • ➤ 【Designed for Desktop PC】- Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
  • ➤ 【New upgrade fan cooling】 – Aluminum alloy – Groove design with high performance fan, dual powerful cooling system, with 15 ° C – 40 ° C cooling effect (depending on the environment), Improve your computer performance, perfect for gamers.
  • ➤ 【SATA power interface】- Fan use 15PIN SATA power interface, stable and simple, 5V working voltage, good versatility and easy to install..
  • ➤ 【Easy to Install and Operate】 – With double-sided clip design, 6 adjustable height screws, suitable for M.2 SSD of various heights, stable installation, better protection of your M.2 SSD..
  • ➤ 【Fine Workmanship】- Main body material: Aluminum alloy, silver plating (Helps eliminate static electricity), anodic oxidation surface treatment. Dimensions: 3 x 0.95 x 0.4in., net weight: 1oz., minimum installation height requirement: 12mm..
Check Stock

inRobert 75mm VGA Graphic Card Cooler Fan Replacement for Sapphire HD 6930 HD 7850 7870 ASUS GTX 570 760 770 Video Card

  • Fan Dimension (L x W x H): approx. 75mm x 75mm x 10mm, Screw hole distance 40x40x40mm.
  • This is DIY Fan for zotac gtx 970 dual Fan video card.
  • The fan not come with any screws , please keep your screws from your Graphic Card.
  • inRobert is a professional seller on video card fan, if you need any video card fan, please contact us.
Check Stock

HA9010H12F-Z 85mm 4-Pin Video Card Cooling Fan Replacement for MSI GTX 1050 1060 Graphic Card PNY GTX1070 DIY Fan

  • Fan Diameter: 85mm , Mounting screw holes distance: 40mm * 40mm * 40mm, can work for many Graphic Card as a DIY fan , please check the fan size from your own Graphic Card.
  • Suitable for MSI GTX 1050/1060 Hurricane GPU.
  • Please keep the screw from your fan , we sell the fan not include any screw.
Check Stock