Reviews 4 nitro Aniline

Aluminum RC Front & Rear Wheel Hubs Hex 12mm Upgrade 1654 for Traxxas 1/10 4X4 Slash Hoss Stampede Rustler 4WD (Red)

  • Complete front & rear hub set for 1/10 Slash 4x4, Hoss 4x4, Stampede 4wd, Rustler 4x4, Telluride 4x4, Rally VXL and Nitro 4-Tec.
  • Also can replace rear hubs for 1/10 2WD Slash, Rustler, Stampede, Skully, Jato 3.3, Ford Raptor, Bigfoot, Nitro Slash, Nitro Stampede, Nitro Sport, Nitro Rustler.
  • Hexagon totation: 0.47'' (12mm), thickness: 0.28'' (7mm).
Check Stock

Hot Racing BWP133B02 Body Clips Retainer with Body Washer (Red)

  • Hot Racing is a United States based company.
  • parts are sourced from Chinese producers.
  • All Hot Racing upgrade parts are direct replacements for stock components.
  • This item works with: Associated Mini MGT 3.0 RTR, MTA4, Monster GT, Monster GT 4.6, RC-10GT2, RC-8 buggy, SC-8 Short Course 8, TC-3 Nitro Sedan.
  • HPI Nitro 10863 Monster King 4X4, Baja 5B, Baja 5T Truck, Firestorm, RS4 Nitro MT2 4wd, RS4 RTR3 EVO, Savage X, Savage X 4.6, Trophy.
  • Kyosho DBX, Gigga Crusher, GT Inferno Sedan, Inferno ST RTR US version, Mad Force, MP6, 7.5,777, Super 10, TR15 4WD, USA-1 Nitro.
  • Losi 1:10 XXX-NT truck, 1:8 8ight Nitro, 1:8 LST, LST2, or Aftershock, 1:8.
Check Stock

TAMIYA Polishing Compound Fine and Finish SET

  • This item works with: Associated Apex Touring V-Type, RC-12R5.x, TC-3 Nitro Sedan.
  • HPI Electric E10, Sprint 2, Sprint 2 Flux.
  • Kawada Sigma 2 1:10 touring, Sigma DC 1:10 Drift.
  • Kyosho Fazer GP 1/10, GT Inferno Sedan, Spider MK2, TF2 Spider EP.
  • Mugen MTX-3 1:10 Nitro Touring, MTX4R 1:10 Nitro Touring.
  • RJ Speed Digger, Legends, Nitro Dragster, Nitro Funny Car.
  • Tamiya TA01, TA01 FF, TA02, TA02W, TA03, TA04, TA05, TL01.
Check Stock

Traxxas 3669A 2.8

  • 2.8" All-Star black chrome wheels with Talon tires and foam inserts.
  • Fits rear: Jato/3.3, N. Stampede,N. Rustler, N. Sport, Fits front: E. Stampede and E. Rustler.
  • Increase the ride height and ground clearance of any Traxxas stadium truck by adding a set 2.8" Talon tires..
  • When using 2.8" Talon tires on Nitro Sport, Nitro Rustler, or Jato/3.3 use a clutch bell that is 2-4 teeth smaller than stock.
  • When using 2.8" Talon tires on the electric Rustler use a pinion gear that is 4-5 teeth smaller than stock.
Check Stock

TEAM LOSI RACING Silicone Diff Fluid, 50,000CS, TLR5286

  • Team Losi Racing is a United States based company.
  • parts are sourced from Taiwanese producers.
  • This item works with: Losi 1:10 SCTE 2.0, 1:10 SCTE short course, 1:10 Speed T, 1:10 TEN-T Nitro Truggy RTR, 1:10 TLR 22 2.0 Buggy, 1:10 TLR 22 2WD Buggy, 1:10 TLR 22-4, 1:10 TLR 22-4 2.0, 1:10 TLR 22SCT, 1:10 TLR 22SCT 2.0, 1:10 TLR 22T Truck, 1:10 XXX-SCT XXX-SCB, 1:10 XXX-T CR Truck.
  • Losi 1:8 8ight 3.0 Buggy, 1:8 8IGHT 4.0 Buggy, 1:8 8ight Nitro, 1:8 8ight-E, 1:8 8IGHT-E 4.0 Electric Buggy, 1:8 8ight-T 3.0, 1:8 8IGHT-T 4.0 Nitro Truck, 1:8 8ight-T Gaso.
Check Stock

WEISHUJI R020 Pull Starter, RC Nitro Car Pull Starter, RC Nitro VX Engine Pull Starter w/ 12mm R025 One Way Bearing for 1/10 HSP Redcat Vertex VX 16 18 SH 21 Engines

  • R020 Pull Starter fits for 1/10 HSP, HPI, Redcat, Volcano S30, Vortex SS, Exceed RC, Hobao, Kyosho, HongNor RC nitro car trucks, RC Nitro Car Pull Starter is not suit for all 16-21 nitro engines..
  • R020 Pull Starter needs you to gently pull the start string and add some extra wax for lasting performance, RC Nitro Car Pull Starter is for 12mm Across Flat One Way Bearing..
  • R020 Pull Starter is with 6mm shaft diameter, RC Nitro VX Engine Pull Starter is convenient in operating..
  • R020 Pull Starter is 100% Brand New produced by WEISHUJI with excellent workmanship, RC Nitro VX Engine Pull Starter is stable and reliable in performance for long lasting service life..
  • Package of R020 Pull Starter includes: 1 x RC Nitro VX Engine Pull Starter 1 x 12mm Hex One Way Bearing 4 x Screws.
Check Stock

CCBBAA 2PCS CF1015H12D Cooler Fan for Sapphire Radeon RX 470 480 580 570 Nitro Mining Edition RX580 RX480 Gaming Video Card Cooling Fan

  • Important note: Before you buy, please check whether your own graphics card fan is consistent with the installation space in the picture. Any questions, please contact us. Thank you!.
  • Model: CF1015H12D Voltage: 12v Current: 0.42A Power Connector: 4-Pin Header.
  • Fan Dimension (L x W x H): approx. 95mm * 95mm * 15mm.
  • Applications: For Radeon RX 590 NITRO+ Radeon RX 580 NITRO+ Radeon RX 570 NITRO+ Radeon RX 480 NITRO+ Radeon RX 470 NITRO+.
  • Please keep the screws on your graphics card fan unchanged, this item does not have any screws.
Check Stock

Futon

  • Full-grain pure-aniline (cognac tan) or semi-aniline (all other colors) dyed Italian tanned leather upholstery.
  • Cognac tan color features a non pigmented leather accentuating the natural beauty of the hide. The leather will scuff and will develop into a beautiful vintage patina with use.
  • Each hide is unique and will vary in depth of color. Corner blocked wooden frame with reinforced joinery. All wood is kiln dried to prevent warping. High density foam with polyester filling.
  • Feather down topper on seating surfaces. Pirelli webbing seat and back support. Feather down and fiber blend seat-back cushions and bolsters.
  • Loose, non-reversible seat and back cushions. Loose bolsters included. Solid wood legs in a walnut finish. Simple assembly required (approximately 5 minutes). Includes curbside delivery.
Check Stock

Smith's Leather Balm (4 oz.)

  • Cleans free of streaks and dust-attracting residue common with all-in-one cleaners, leaving your leather looking like new..
  • pH-balanced and alkaline-free to maintain leather's intended sheen free from artificial gloss and to preserve leather's soft, supple feel..
  • Great leather furniture and to keep cars with leather interiors looking their best..
  • Ideal for use on finished, aniline, and semi-aniline leather, as well as vinyl. Not intended for use on suede and nubuck..
  • Made exclusively for Guardsman in Italy by a world leader in leather finishing technology. Guardsman has been the leader in furniture care and delivering quality products since 1915..
Check Stock

iSi Nitro Charger with Nitrogen Gas for use with iSi Nitro Whip, Box of 16 Individual Chargers, Bronze

  • Nitro Charger only for use with iSi Nitro Whip for preparing Nitro Brew coffee, tea and cocktails.
  • Includes 1 boxe of 16 pack Nitro Chargers.
  • each charger holds 2.4 grams of Nitrogen Gas N2 only for use with iSi Nitro Whip.
  • 16-count box of Nitro Chargers (Nitrogen Gas) in metallic bronze color, designed only for use with iSi Nitro Whip..
  • Always use iSi Nitro Whip and Nitro Charger in combination and only in accordance with instructions.
  • do not use for other purposes than to create Nitro coffee, tea and cocktails.
  • Remove empty charger after dispensing all contents.
Check Stock

iSi North America 2293001 Decorator Tip Red Tulip for Gourmet Whip & Thermo Whip by iSi North America

  • Case of 6 Nitro Whips offer a way to create Nitro coffee, tea and cocktails at the table setting or bar side.
  • The Nitro Whip provides a simple process for infusing Nitrogen gas into liquid for nitro brew coffee, nitro teas and cocktails.
  • just fill the Nitro Whip with cold liquid, charge with one iSi Nitro charger, shake and dispense for a spectacular cascading effect, making each beverage unique.
  • Nitrogen creates a velvety creamy texture and long lasting foamy head for brews and cocktails.
  • Nitro Whip allows dispensing fresh for every serving and the closed system allows the brew to remain unchanged for several days in the refrigerator.
  • NSF approved, stainless steel bottle, designed for professional use.
  • non-slip silicone grip on head and charger holder.
  • specifically designed valve safely regulates nitrogen gas pressure and introduction in to the bottle.
  • For use with only iSi Nitro Cream chargers (N2), no other charger will work with in the iSi Nitro Whip.
Check Stock

Star Wars Battlefront 2 (Xbox One)

  • Full-grain pure-aniline (cognac tan) or semi-aniline (all other colors) dyed Italian tanned leather upholstery.
  • Cognac tan color features a non pigmented leather accentuating the natural beauty of the hide. The leather will scuff and will develop into a beautiful vintage patina with use.
  • Each hide is unique and will vary in depth of color. Corner blocked wooden frame with reinforced joinery. All wood is kiln dried to prevent warping. High density foam with polyester filling.
  • Feather down topper on seating surfaces. Pirelli webbing seat and back support. Feather down and fiber blend seat-back cushions and bolsters.
  • Loose, non-reversible seat and back cushions. Loose bolsters included. Solid wood legs in a walnut finish. Simple assembly required (approximately 5 minutes). Includes curbside delivery.
Check Stock

Blackrock Leather `N' Rich Case- 820

  • Full-grain pure-aniline (cognac tan) or semi-aniline (all other colors) dyed Italian tanned leather upholstery.
  • Cognac tan color features a non pigmented leather accentuating the natural beauty of the hide. The leather will scuff and will develop into a beautiful vintage patina with use.
  • Each hide is unique and will vary in depth of color. Corner blocked wooden frame with reinforced joinery. All wood is kiln dried to prevent warping. High density foam with polyester filling.
  • Feather down topper on seating surfaces. Pirelli webbing seat and back support. Feather down and fiber blend seat-back cushions and bolsters.
  • Loose, non-reversible seat and back cushions. Loose bolsters included. Solid wood legs in a walnut finish. Simple assembly required (approximately 5 minutes). Includes curbside delivery.
Check Stock