Reviews 4 Post 3 5 Ton

OTC 6290A Front Hub Puller

  • necessary for wheel bearing or brake rotor service.
  • Provides the mechanical advantage and straight pull not possible with a slide hammer.
  • Services 1988-2013 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon.
  • Services 1994-2013 Dodge 3/4-ton and 1-ton RAM trucks.
  • Services 1998-2013 Ford 3/4-ton and 1-ton trucks and Excursion.
Check Stock

Goodman 4 Ton 14 Seer Heat Pump System with Multi-Position Air Handler

  • This listing includes Goodman 4 Ton 14 SEER Heat Pump, Goodman 5 Ton Multi-Position Air Handler, Thermal Expansion Valve (TXV) for a 3.5-5 ton R-410a.
  • This comes with a 10-year parts limited provided it is installed by a qualified installer and registered online.
  • Accessories such as Linesets, thermostats, LP conversion kits, Sold Separately.
Check Stock

Goodman 4 Ton 15 Seer Heat Pump System with Multi-Position Air Handler

  • This listing includes Goodman 4 Ton 14 SEER Heat Pump, Goodman 4 Ton Multi-Position Air Handler, Thermal Expansion Valve (TXV) for a 3.5-5 ton R-410a.
  • This comes with a 10-year parts limited provided it is installed by a qualified installer and registered online.
  • Accessories such as Linesets, thermostats, LP conversion kits, Sold Separately.
Check Stock

B&W Trailer Hitches 1067 Chevrolet and GMC Gooseneck Hitch

  • Fits: 2001-2010 Chevrolet and GMC 3/4 Ton HD Long and Short Bed Trucks.
  • Fits: 2007-2010 Chevrolet and GMC 1 Ton (1 bed crossmember over the axle).
  • Bolts to existing holes in the frame with no drilling or welding.
  • solid, one-piece machined receiver socket.
  • Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball.
Check Stock

Superlift | 91335 | Bullet Proof Rear Hose | Single Hose | Fits 1971-1987 GM Pickup; 1971-1991 Blazer/Suburban with 4-6" Lift Kit

  • 1971-1991 Blazer / Suburban with 4-6" Lift Kit.
  • Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
  • Stainless braided brakes hose (1) with crush washers Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
  • Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer, Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
Check Stock

OTC 1779B 12-Ton Capacity High Profile Jack Stand - 33-3/4 to 44-1/4 Inch Range

  • OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity, high profile jack stand has the strength and stability needed for big jobs.
  • Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces.
  • Round tube center post features 9 height adjustment settings.
  • high strength steel locking pin is attached to the stand with a chain so it can't go missing.
Check Stock

KAKA Industrial HB-8 Heavy-Duty 8 Ton Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender with 5 Dies

  • HIGH STABILITY. KAKA Industrial 8 ton hydraulic roll cage tube bender features as study design and solid steel frame.
  • the 8 ton forming jack will guarantee the stability when it is in use.
  • HIGH PRECISION. The precise tubing bending process can be realized with the support of steel forming dies and cast followers, which leave the material without flattening or defaming the edges.
  • FIVE DIES ARE INCLUDED. There are 5 different dies are delivered with this bender.
  • they are 3/4", 1", 1-1/2", 1-5/8", 1-3/4" diameter for round tubing.
  • SOLID CONSTRUCTION. The 8 ton tubing bender is build with quality material that can be lasted for many year heavy use. The solid steel frame and cast-iron base will both guarantee the durability of usage.
  • EASY OPERATION AND HIGH FLEXIBILITY. The tubing bender is hydraulic backed and hand-operated. The maximum bending angles can up to 90 degree. Five different dies allow quick change and increase flexibility. It would be a great tools for people who want to customize the tube components.
Check Stock

(32 Pack) New Wood Fence Post Black Caps 6X6 (5 5/8\) Pressure Treated Wood Made In USA (32)

  • 4x4 (3-5/8" x 3-5/8") Plastic Black Fence Post Caps - 16 Pack.
  • Cap presses over the outside of a 4x4 (3-5/8" x 3-5/8") Post, a little flex, but will Not Stretch. Must be secured with nails or an adhesive that bonds to plastic and wood, should be pre-drilled if securing with nails.
  • Inside Dimension 3-5/8" x 3-5/8" Square, 1/8-inch-thick to protect your treated posts from water and sun damage.
  • Please take time to measure your post not all 4x4 post are the same dimension. These caps for Nominal 4X4 fence post that measure 3-5/8"x 3-5/8".
  • Dimensions - Measures Approximately: Inside Dimension: 3-5/8” x 3-5/8 inches.
  • Inside Cap Edge Height (Edge that Covers Post): 1/2 inch.
Check Stock

Air Lift 57212 LoadLifter 5000 Air Suspension Kit

  • Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride.
  • Up to 5,000 pounds of load leveling capability.
  • Easy to install with included detailed instructions.
  • Fitment details listed in the product description. Fits many 3/4 ton and 1 ton pickups and vans.
  • Lifetime Warranty with 60 day Ride Satisfaction Guarantee.
Check Stock

Porto-Power B65115 Black/Red Hydraulic Body Repair 19 Piece Kit - 10 Ton Capacity

  • Automatic pump overload system protects against damage to rams and equipment.
  • Heavy-walled extension tubes stand up in the toughest situations.
  • Flex head features permanently molded rubber pad - interlocked to prevent seperation.
  • 1/2 ton capacity hydraulic spreader features 2" jaws and spreads from 5/8" to 3-3/4".
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

General Motors 12564763, Serpentine Belt

  • C/K Pickup, 5.0 & 5.7L, with ac. Express, savana. 5.0l. S-series. 4.3L, with ac. 5.0 & 5.7L, with ac. Without 105 amp alt. Fan, with pmp, ac, alt, p/s. 1/2, 3/4 & 1 ton, 1996 new style, gas engine, 4.3, 5.0, 5.7l with ac, 124, 130 amp alt..
Check Stock

4\ x 4\ White Traditional Vinyl Post Skirt | Vinyl Post Trim | Two-Piece | Will NOT Fit A Traditional 4x4 Wood Post(Single Pack)

  • Easy to Install: 12/13 GA. Steel fence post base allows for easy installation of 4 x 4 (nominal) wood posts onto existing concrete or other hard surface..
  • Multi- Purpose Design: The base is made from 2.5mm thick steel and does not require digging. You simply attach it to the surface and screw in the wood post. Base design is perfect for deck supports, porch railing, handrails and post holders. It can also be used as table leg and mailbox post support brackets..
  • Sturdy and Durable: Make repairing or upgrading your fence easy and affordable by using your strong and secure black powder-coated steel constructed fence post base..
  • Comes with a Corner Level: Included in this offer is this foldable L-shaped sturdy plastic pipe and post corner level which has dimensions of 5.3" x 7.5"..
  • For 4 x4 Post: The DoMerch square box of the fence post base measures 3 5/8" x 3 5/8" to accept a 4 x 4 (nominal measurement) support timber . The height of the box is 5 1/2" and the entire base, left to right, measures 6 5/8 " for added strength and stability..
Check Stock