Reviews 4 Jaw Chuck

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

  • remove and replace all 4 jaws in less than a minute.
  • jaws will snap into place for a secure mount.
  • use the included jaw removal tool to pop them off the chuck body.
  • Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
  • Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

Lathe Chuck, K72-80 4 Jaw 3.15 Inch 4000r per min Independent and Reversible Jaw Metal Lathe Chuck Turning Machine Accessories with 1 Hex Wrench and 3 Screws

  • HIGH QUALITY: The K72-80 Lathe Chuck is 100% brand new and high quality, hardened and durable in use..
  • WHOLE SET: The package of this Lathe Chuck includes 1 x 4-Jaw Lathe Chuck, 1 x Hex wrench and 3 x Screws..
  • FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. The chuck diameter is approx. 80mm / 3.15in..
  • SUPERIOR PERFORMANCE: The Metal Lathe Chuck can be adjusted Independently to center suitable for processing special with superior gripping Force..
  • LONG LASTING: Vulnerable parts of the Chuck Lathe Parts are specifically engineered by quenching, for greater durability and extended life..
Check Stock

PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty

  • PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Mophorn K72-100 Lathe Chuck 4 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine

  • Premium Material: Diameter: 100 mm (3.93 in). The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable..
  • Reversible Jaw Set: The lathe chuck is equipped with four reversible jaws that can be stepped inward or outward to hold raw materials of different sizes..
  • Enhanced Flexibility: The T chuck key of the lathe part allows the installation of various workpieces. And easy operation reduces changeover time for your convenience..
  • Of High Precision: The 4-jaw lathe chuck works accurately, bearing tolerance of ≤0.07 mm (0.003 in) to ensure satisfying metal processing..
  • Remarkable Versatility: This chuck has a compact construction. It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes..
Check Stock

CKS375 Wood Lathe Chucks, 3.75\ 4-Jaw Self-Centering Scroll Chuck with 1\ x 8TPI Thread Woodworking Turning Tools Set Include( 3.75 Gear Chuck,5 Interchangeable Jaws, 1 Wood Screw)

  • PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS375 3-3/4"" Wood Lathe Chuck Set includes a 5-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • 【PRODUCTS INCLUDE】 - FJL FORCE 4IN lathe chuck set includes chuck body,a set of fastening levers,T-hex wrench,1'' x 8TPI pre-thread and 3/4" x 16TPI conversion adapter, a set of 2in dovetail jaws,a set of step jaws, a set of flat jaws,a set of high jaws,a set of round jaws,to meet your creation basic clamping needs,no need to worry about going pairing and finding jaws,bringing much convenience to your operation..
  • 【LONG SERVICE LIFE】 - FJL FORCE 4inch self-centering keyed wood lathe body is made of high-grade K1045 steel,the sturdy wood lathe chuck can withstand high-intensity work without damage,extending the service life of the chuck.The jaws are hardened and hardened surface with black oxide electric coating,stain and wear resistant,not easy to rust,long service life..
  • 【ANTI-JITTER】 - Four-jaw mini lathe chuck has a high-precision self-centering design,the jaw fits perfectly with the chuck,tightening the clamping force beyond your imagination,the keyed fastening mechanism prevents the chuck from loosening during high speed operation,the claw and the disc body is linked with the I-shaped structure more firmly,the gap is small,the precision is high, there will be no jitter,falling problems..
  • 【QUICK INSTALLATION】 - Lathe tools clamping wi....
Check Stock

Nova 23108 Supernova 2 Premier Pro-Tek Chuck Bundle with Pro-Tek 2' Jaw Set, 4' Bowl Jaw Set, 5' Bowl Jaw Set, Woodworm Screw, Plastic Case & accessories, bundled with Nova ILNS 1-1/4' x 8tpi Insert

  • Pro-Tek 23108 Supernova 2 Chuck Bundle with 1-1/4" x 8tpi Insert Adapter.
  • Rust resistant nickel plating on chuck body.
  • Includes Pro-Tek 2″ jaws with dovetail and serrated inner face, JS100N 4" Bowl Jaw Set, and JS130N 5" Bowl Jaw Set.
  • 6 point star head jaw screws for better holding power and quicker fastening, & T-handled 6 point wrench for faster jaw changes.
Check Stock

3 Inch 4 Jaw Mini Wood Lathe Chuck Self-centering Lathe Chuck with 1 x 8TPI Thread Lathe Chucks for Woodturning

  • ✔PERFEXT QUALITY:The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck..
  • ✔APPLICABLE SIZE：The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece,Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm..
  • ✔FAST CLAMPING SPEED-This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • ✔FREE ACCESSORIES：We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece..
  • ✔WIDE APPLICATION- The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

  • 【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
  • 【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
  • 【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
  • 【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
  • 【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock