Reviews 4 High Power Amplifier

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 Watts Car Amplifier has a power rating distribution as followed 280x4 RMS @2 Ohms, 50x4 RMS @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you....
Check Stock

CT Sounds CT-150.4D Full-Range Class D 4 Channel Car Audio Amplifier, 1000 Watts RMS

  • 4 channel amplifier car audio with 250 watts RMS at 2-ohm load x 4-channels (14.4v).
  • 150 watts RMS power at 4-ohm load x 4-channels (14.4v).
  • 475 watts RMS at 4-ohm bridged x 2-channels (14.4v).
  • Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application.
  • but dont let the size fool you, this 4ch car amp produces amazing sound quality.
  • MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier.
  • Show your friends you can do 100 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this amplifier for car speakers.
Check Stock

CT Sounds CT-80.4AB Full-Range Class AB 4 Channel Car Audio Amplifier 480 Watts RMS

  • 4 channel amplifier car audio with 110 watts RMS at 2-ohm load x 4-channels (14.4v).
  • 80 watts RMS power at 4-ohm load x 4-channels (14.4v).
  • 160 watts RMS at 4-ohm bridged x 2-channels (14.4v).
  • Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application.
  • but don’t let the size fool you, this 4ch car amp produces amazing sound quality.
  • MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier.
  • Show your friends you can do 70 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this car speaker amplifier.
Check Stock

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 1500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 1500 Watts Car Amplifier has a power rating distribution as followed 200x4 RMS @2 Ohms, 40x4 RMS @2 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you....
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 2250W RMS 4500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable.
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 1125 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • The RP-2000.1D is one of the most popular amplifiers ever released from Skar Audio and for good reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Powe....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2000 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Power – This Class D 2000 Watt Car Amplifier has a power rating distribution as followed 2000 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 500 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • RCA Ports - The RCA Jacks in this bass boost monoblock car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp.
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • QUALITY - This Class D Monoblock Amplifier exhibits quali....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2500 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • Power – This Class D 2500 Watt Car Amplifier has a power rating distribution as followed 2500 X 1 @ 1 OHM, 1250 X 1 @ 2 OHMS, 825 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to ....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

5800W 12V 4 Channel Car Amplifier Stereo Audio Super Bass Power Subwoofer Amp

  • power amplifier, lepy power amplifier with high fidelity and high efficiency, high power amplifier, subwoofer compensation for public advertising, sofa background, massage chairs, furniture installation, modification, desktop computer and so on use value..
  • Recommend the use of 12V5A DC power supply with the packing size: 4.6*10.5*15cm.
  • lightweight, has a matt silver casing and allows for full control of your volume, treble and bass output. It also has a jack for plugging your MP3, MP4,for iPod or CD player.
  • Three channels, provide a variety of options.
  • Mini car amplifier, save your car room and easy to operate.The Procut is not include Power cord, power adapter, power supply..
Check Stock

CT Sounds ATv2-125.4D 4-Channel 800-Watt Class D Competition Car Amplifier

  • 4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
  • Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
  • LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
  • Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
  • Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
  • sleep easy at night knowing your 4ch car audio amplifier is protected.
Check Stock