Reviews 3thumb Screw

Rexka 50 pcs M4.8-1.61 x 16mm Hex Head Sems Screws for BMW Wheel Arch Trim Underfloor Coating Rear Trim Cover Underhood Shield 07147129160 E46 E60 E63 E66 E70 E82 E83 E90 07-14-7-129-160

  • Other Names: Bumper Cover Screw, Fender Liner Screw, Energy Absorber Screw, Side Duct Screw, Inlet Duct Screw, Front Shield Screw, Bumper Assembly Screw, Guide Screw, Air Deflector Screw, Lower Extension Screw, Radiator Support Screw, Inlet Duct Nut, Rocker Molding Screw, Side Reinforced Screw, Splash Shield Screw, Center Support Nut, Center Shield Screw, Wheelhouse Liner Screw, Hex Head Screw With Washer:889520.
  • Positions: Left Upper, Left Outer, Left Lower, Left Front, Right Upper, Right Outer, Right Lower, Right Front.
  • Replaces BMW: 07-14-7-129-160 Fits E46 1999-2006, E60 2004-2010, E63 2004-2010, E66 2002-2008, E70 2007-2011, E71 2008-2011, E82 2008-2011, E83 2004-2009, E90 2006-2011, F01 2009-2011,F02 2009-2011.
  • Black Zinc M4.8-1.61 x 16mm (#10 x 5/8").
Check Stock

SmallRig Camera Screw Set,26 Pcs Screw Set for Camera Accessories AAK2326

  • 【FOR CAMERA ACCESSORIES】SMALLRIG Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera related....
  • 【26 SCREWS IN TOTAL】The box includes six types of screw, 26 screws in total.
  • 【SOCKET CAP & SLOTTED & PHILLIPS SCREW】26 screws in total: 2 x 1/4” slotted screw, 8 x 1/4” socket cap screw, 2 x 3/8” slotted screw, 4 x M2....
  • 【SIX TYPES OF SCREWS】The box includes six types of screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws.
  • 【EXAMPLES OF USE】The m2.5 screw can be used for selected camera cage which locked with m2.5 screw on the side. The m3 and m4 screw can be used for....
Check Stock

WHARSTM Caster Wheels 3 Locking Swivel Casters Set of 4 3/8 -16 x 1 Screw Diameter 3/8 Screw Length 1 Casters Rubber Casters with 360 Degree No Noise Castor Wheels Stem Casters with Brake

  • Easy to install: Screw swivel casters, universal casters with brake, set with nuts and wrenches, the upper wave plate is an octagonal wave disc, easy to install. Stem Casters, Casters with No Noise Set of 4 Castors..
  • Heavy duty (load capacity): A single wheel can carry 150lbs, four wheels can carry more than 450lbs, easy to push. 3" Locking Swivel Casters, 3/8"-16 x 1" (Screw Diameter 3/8", Screw Length 1") Threaded Stem Casters, Casters with No Noise Set of 4 Castors..
  • Non-marring thermoplastic rubber wheels：Smoothly moved with no marking, won't harm your wooden floor, no noise, the surface of the rubber wheel is soft and better protects the ground..
  • Multitude of uses: These casters are widely used, generally used for workbench, cart, trolley, shelf, wooden cabinet, furniture, home appliances, etc..
  • Screw rod specification: Please confirm the size of the screw before purchasing, so as to avoid buying mistakes. Screw specifications: 3/8"-16 x 1": Screw Diameter 3/8 inch (0.9525cm), Screw Length 1 inch (2.54cm). Screw specifications: 3/8"-16 x 1": Screw Diameter 3/8 inch (0.9525cm), Screw Length 1 inch (2.54cm). Screw specifications: 3/8"-16 x 1": Screw Diameter 3/8 inch (0.9525cm), Screw Length 1 inch (2.54cm)..
Check Stock

Damaged Screw Extractor Kit, Stripped Screw Extractor Set, Drill Bit Set, Broken Bolt Extractor and Screw Remover Set,Made From H.S.S. 4341#, Set of 6 Pcs Stripped Screw Remover

  • [POWERFUL Stripped Screw Extractor ] : Striped Screw Works with Any Size Screw or Bolt Extractor Removes Even the Most Stubborn Stripped, Damaged, Embedded, Rusted and Painted-over Screws and Bolts.To Use The Grinding Head,The Screw Mouth Neets To Be Polished To A Sufficent Denth. The Greater The Depth, The Faster The Extraction Head Can Extract..
  • [WIDE VERSATILITY]:6 Piece Screw Extractor Set(#0, #1, #2, #2, #3, #4) Works with any Drill and any Size Screw or Bolt. Such as Common Hexagon Bolts, Lag Screws, Wood Screws, Hexagon Socket Screws, Machine Screws, Sheet Metal Screws and Other Screws, This Damaged Screw Extractor can Remove All Common Sizes of Damaged, Stripped or Broken Screws..
  • [HIGH QUALITY HSS 4341 AND TITANIUM PLATED] This Damaged Screw Removal Tool Kit Screw Extractor is Made of HSS 4341 High-Quality Speed, The Hardness is Up to 65 HRC, The Density And Hardness Are About 20% Higher Than The Ordinary Steel in The Market.
  • The Hardness is High, And it is Durable , Any Damaged Screws Can be Easily Removed. And We Plated a Layer of Titanium Extractor on it to Make it not Easy to Rust, Easier to Store, and More Beautiful..
  • [EASY OPERATION] A Damaged Screw Adapter can get the Job Done in Two Simple Steps , Choose a Bit Smaller Than the Damaged S....
Check Stock

Straight Fluted Screw Extractor Set 5 Pcs M4-M18 | 3/16-Inch to 5/8-Inch Easy Out Bolt Extractor Set for Broken Bolt Thread Repair Carbon Stee

  • 1.STRAIGHT FLUTED SQUARE BROKEN SCREW EXTRACTOR：Solve the problem that the broken screw cannot be removed. 5 models can deal with metric M4-18 or....
  • 2.SCREW RANGE USE:NO.1 M4-M6~2.2-4.6MM Drill Bits.
  • 3.SQUARE CLAMPING:The tail is square, which is convenient for the tap to clamp and manually exit the screw..
  • 4.STRAIGHT FLUTED: Directly and quickly jam the inside of the screw after drilling to facilitate the removal of the screw..
  • 5.THE SCREW TYPE IS APPLICABLE: Phillips screw, internal hexagon screw, external hexagon stud, flat screw, etc., as long as the screw thread diameter....
Check Stock

Mayhew Pro 37332 Screw Extractor Set 5-Piece Black

  • Used for removing broken or seized screws.
  • Hardened steel edges allow for easy screw removal while the fluted cutting edges cut into the screw shaft to remove the screw.
  • Includes #36961 Screw Extractor D1/8″ S10-5/16", #36962 Screw Extractor D3/16″ S3/8″, #36963 Screw Extractor D15/64″ S7/16″ , #36964 Screw....
  • Black oxide finish for additional rust protection.
Check Stock

580 Pcs Screw Hole Stickers and 120 Pcs Self Tapping Plastic Screw Caps Covers, Self-Adhesive PVC Cover Caps Screw Hole Dustproof Sticker for Wood Screw, Furniture Accessories (Black)

  • Quantity and Size: you will receive 6 sheets of self adhesive screw hole stickers with 3 sizes of 12mm/ 0.47inch, 15mm/ 0.59inch, 21mm/ 0.83inch in black, 580 pieces in total. And 100 screw covers black, approx. 12mm/ 0.45inch in diameter, suitable for 4mm/ 0.16inch self tapping screw heads.
  • Sturdy and Reliable: screw covers caps stickers are made of quality PVC plastic, waterproof and practical, not easy to deform, and the screw covers caps are made of reliable plastic, strong and sturdy, will not easily break, can be used for a long time..
  • Beautify Furniture: these screw covers stickers adopt strong glue, paste firmly and will not easily fall off.
  • Screw hole covers stickers will provide good protection for your screws, effectively prevents dust and avoid rust, after the paste makes the making your furniture more neat and beautiful..
  • Easy to Use: the self-adhesive design makes these furniture cover stickers are easy to use, simply peel screw caps from the backing sheet and stick over the screw hole to be covered. As for the black screw covers caps, you can easily install them in place with a screw tool..
  • Extensive Usages: these screw cover stickers and screw caps can be widely applied for wooden furniture, cabinet st....
Check Stock

Tap Extractor - Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set(10件套)

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

B BOSI TOOLS 12 Piece Damaged Screw Extractor Set, Stripped Screw Extractor Set, Quickly Remove All Common Sizes of Damaged, Broken or Stripped Screws

  • 【High-Quality Materials】This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63 hrc, it’s durable and easily to remove any damaged screws..
  • 【Damaged Screw Extractor Kit】Stripped screw extractor set easily and quickly remove all common sizes of damaged, broken or stripped screws, making this the only set you’ll need for most fastener issues..
  • 【12 Piece Screw Extractor Set】The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • 【Wide Compatibilit】IBasically meet all your needs for various screws extracting. Such as allen bolts, lag bolts, hex bolts, machine screws, wood screws, sheet metal screws and other screws. A screw extractor set solves most of your home’s problems with screw repairs, including wall panels, wood and sheet metal bolts..
  • 【Easy to Use】With the support of adapter bracket and extension rod, the damaged screw can be easily removed without wasting time and energy, and the operation is simple and convenient.the screw remover set comes with an essential tool kit box, it’s very convenient to put it into your bag or take it any....
Check Stock

60pcs Thread Insert Kit 304 Stainless Steel Wire Screw Sleeve Thread Repair Insert Assortment Kit

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

Oem liftmaster chamberlain Genuine Screw Drive Coupler

  • Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current).
  • Replaces sprocket coupler on screw drive rail assemblies..
  • Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and models 4600, 4620, 4640, 9902, PD420, PD460.
Check Stock

3-in-ONE Professional Garage Door Lubricant Spray, 11 Oz.

  • REDUCE GARAGE DOOR OPENER NOISE: Apply this screw drive lube annually to reduce garage door opener noise, for smooth operation and to prolong the long life of screw drive rail..
  • DESIGNED FOR GENIE GARAGE DOOR OPENERS: This screw drive lube is designed specifically for Genie screw drive opener rails, and is the only recommended lubricant for Genie garage door openers..
  • APPLIES EASILY: The lithium-grease composition applies quickly and easily, and one tube lubricates the entire screw drive..
  • GREAT VALUE: Sold as a 3-pack, and one tube lubricates an entire screw drive, so you have plenty of screw drive lube for all your future needs!.
  • ONCE A YEAR APPLICATION: Screw drive lubrication is recommended for application in 1 in. dabs at 3 points along the rail once per year for best results. When used regularly, it will enhance the performance of your garage door opener..
Check Stock

100PCS M10 Wire Screw Sleeve,Thread Repair Insert Kit,Stainless Steel Thread Locking Inserts,for Aircraft, Automotive, mechanized Fasteners

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock