Reviews 3m Structural Adhesive Epoxy

AES Industries 200mL 1 1 and 2 1 Dual Cartridge Applicator Gun for Dispensing Panel Bond Adhesive Fillers Structural Epoxy Plastic Repair Epoxy and Adhesives

  • HOLDS AND DISPENSES 200mL 1:1 and 2:1 two part cartridges from all major brands including 3M, SEM, Duramix, Transtar, Evercoat, Norton and many more....
  • HIGH 26:1 thrust ratio guarantees smooth dispensing of light to high viscosity materials..
  • EASY SQUEEZE trigger allows for one handed operation with less hand fatigue..
  • HEAVY DUTY triple rod driven design guarantees even product mixing every time no matter the material being dispensed..
  • TWO PART MATERIALS this applicator holds and dispenses are (but not limited to): panel bonding adhesive, fillers, structural epoxy, plastic repair....
Check Stock

West Systems G Flex Epoxy Adhesive Tube 655k

  • EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics..
  • MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for r....
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

G/Flex 655-1 1 oz syringe

  • G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods.
  • Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • ...he firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier) 5 mils (liner). Adhesion: 288 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Application Temperature: 50F to 100F. Core: 3-inch diamet....
Check Stock

3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray

  • ...he firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier) 5 mils (liner). Adhesion: 288 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Application Temperature: 50F to 100F. Core: 3-inch diamet....
Check Stock

West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin and Epoxy Hardener, Permanent Waterproof Bonding Of Fiberglass, Ceramics, Metals, Plastics, Damp & Woods, 4.5 Ounce x 2 Bottles

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

3M 4905/CLR055 Scotch 4905 VHB Tape: 1/2" x 15 ft, Clear

  • ...lication ideas include sealing between the inner and outer dome of skylights, attaching handles to sliding glass doors, mounting backlit translucent signs, and edge bonding resin filled glass..
  • 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interiors and exterior structural bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • 3M 4905 VHB Tape is made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry of 3M 4905 provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance..
  • Carrier/Backing: solid acrylic material. Adhesive: general-purpose acrylic. Release Liner: red PE film. Thickness: 25 mils (carrier, adhesive) 20 mils (carrier) 5 mils (liner)..
  • Adhesion: 192 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F to 100F. Density: 60 pounds per cubic foot. Dynamic Overlap Shear: 70 po....
Check Stock

K&W 401504 Copper Coat Gasket Compound - 4 Fl Oz

  • A medium viscosity single component moisture curing urethane adhesive..
  • Bonds replacement auto glass to car bodies. Thick bondline may allow some non-structural body panel applications..
  • 3M Professional Caulking Gun - PN08993, 3M Threaded Cartridge Nozzle - PN08187.
  • Strong-gripping power offers a permanent bond.
  • For industrial/occupational use only. Not for consumer sale or use..
Check Stock

Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet

  • Use for leak repair in basement concrete foundation repair, industrial and residential concrete floors, patios, sidewalks, balconies, pools and parking decks, reservoirs, tanks and more..
  • This product restores the structural integrity of the cracked wall by filling the crack with a high-strength adhesive that essentially "welds" the cracked wall together. This is not an expansion foam product..
  • Excellent adhesion to concrete, wood, fiberglass, and metal surface.
  • Wait 24-hours after applying epoxy paste to the crack for proper cure. After injecting the epoxy from cartridges, wait another 24-hours for full cure..
  • Each kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall.
Check Stock

3M 4952/WI055 Scotch 4952 VHB Tape: 1/2" x 15 ft, White

  • ...nergy substrates, including many plastics and powder coated paints, plus smooth general-purpose substrates. Its firm foam provides the highest level of foam strength in the 3M VHB tapes family..
  • 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. These VHB tapes are made with an acrylic foam which is viscoelastic in nature..
  • This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: low surface energy synthetic. Release Liner: white paper (printed). Thickness: 48 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 3 mils (liner)..
  • Adhesion: 400 ounces per inch (to stainless steel test panel). Tensile Strength: 80 pounds per inch (longitudinal). Service/Operating Temperature: up to 160F. Application Temperature: 50F to 100F. Density: 50 pounds per cubic foot.....
Check Stock

3M 4910/CLR055 Scotch 4910 VHB Tape: 1/2" x 15 ft, Clear

  • ...metal. Application ideas include sealing between the inner and outer dome of skylights, attaching handles to glass doors, mounting backlit translucent signs and edge bonding resin filled glass..
  • 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • 3M 4910 VHB Tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance..
  • Carrier/Backing: solid acrylic material. Adhesive: general-purpose acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner). Adhesion: 240 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal)..
  • Service/Operating Temperature: up to 200F. Application Temperature: 50F to 100F. Density: 60 pounds per cubic foot. Dynamic Ov....
Check Stock