Reviews 3d Printing Nozzle

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best pr....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....
Check Stock

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

Flashforge Adventurer 3 3D Printer Leveling-Free with Removable Flexible Platform, Detachable Nozzle, Filament Detection, Built-in HD Camera, Wi-Fi Cloud Printing, Ultra-Mute Printing, Support ABS/PLA

  • ...additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Super Quiet & Small Device Size】 Adventurer 3 3D Printer equips with full color touch screen and the build volume 150x150x150mm..
  • 【Filament Detection&On-line Monitor Printing Process】Built in camera, records 3d printing process in real-time, allows you to monitor 3d printing status through FlashCloud or PolarCloud anytime. When filament runs out, the sensor pauses prints and sets off an alarm which saves materials and improves printing success rate..
  • 【Removable Flexible Platform】Quick release memory material platform plate is heated evenly, is resistant to bending and is not easily deformed. Platform can be heated up to 100°C in 5 minutes and easy to removed model with lightly press..
  • 【PLS NOTE】Flashforge 3d printer Adventurer 3 provides lifetime technical support and 12-month warranty. If you have any questions, please feel free to contact us..
Check Stock

45 Pieces 3D Printer Tools Kit, YEETIN 3D Printing Accessory Includes Deburring Tool, Digital Caliper, Art Knife Set, Tube Cutter, Storage Bag Suitable for 3D Print Removing, Cleaning, Finishing

  • PRINTING EXPERIENCE ENHANCED: This product contains all the essential tools a maker needs to successfully 3D print, as well as additional items to further simplify your experience for a faster and better workflow. With all the tools in this kit, successfully making and handling 3D prints has never been easier and faster.
  • 45 Pieces SET: product includes 1 set of deburring tools(1 pc NB1100 deburring tool handle & 6 pcs deburring blades), Electronic Digital Caliper, 10 pcs Cleaning Needles, Art knife set(14 pcs blades and 1 pc handle), Long nose pliers, Flush cutters, 3 pcs wire brush, Nozzle cleaning kit, Tube Cutter, 2 print removal spatula, needle file, Cutting Mat, Glue stick and storage bag.
  • FOR REFINED POST-PROCESSING: YEETIN 3D Printing Tool Kits entail multiple tools specifically chosen and proven to refine your 3D printing, use the nozzle cleaning kit to remove small blockages in the nozzle, calipers and needle files for precise measurement, as well as a deburring tool and art knife blades for fine post-processing.
  • EXCELLENT PACKAGE：All of these essential tools are packed in a travel-size tool pouch that allows you to easily store and carry them, and also prevents them from getting lost.
  • GIFT IDEA FOR 3D PRINT MAKER: We have chosen quality tools....
Check Stock

JAYO PLA+ 3D Printer Filament, PLA Plus Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool Printing Material fit for FDM 3D Printers, PLA+ White

  • 【Toughness Plus】Compared with PLA filament, JAYO FDM 3D PLA+ Filament has better toughness, higher strength, lower shrinkage and lower warping, meeting your demands for different printing projects and bringing you a high quality printing experience.
  • 【No Clog & Bubble】JAYO PLA+ filament material has the advantages of no clogging and no bubble, thanks to dry for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag. It can make your 3d printing objects more delicate.
  • 【Dimensional Accuracy & Tidiness】JAYO 1.75mm PLA+ filament has high precision on diameter 1.75 mm (dimensional accuracy +/- 0.02 mm). With tidy line and good winding, you will get a extremely smooth printing.
  • 【Printing Setting】The recommended of our PLA+ consumable printing at a nozzle/extrusion temperature is 210°C - 235°C and bed/platform temperature is 55°C - 65°C. Under the temperature, it can melts welll and print perfectly.
  • 【Stable Printing Quality】PLA+ 3D printing filament has strong layer adhesion, melts well and feeds smoothly constantly without clogging the nozzle, bringing you a stable and good 3D printing. You will be immersed in the pleasure printing.
  • 【Wide Compatibility】JAYO PLA+ 1.75mm printing material is compatible with mos....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ...et 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
Check Stock

Flashforge USA Finder FDM 3D Printer - V2

  • 【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It's suitable for various....
  • 【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from....
  • 【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after....
  • 【Out of the box】– Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in....
  • 【What you get】– Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Columbia Kids Omni-Heat 3-D Knit Crew (Little Kids/Big Kids) Black/City Grey XL (18-20 Big Kids)

  • 【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG filament etc..
  • 【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from extruder just in one push.
  • Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could purchase additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament..
  • 【Out of the box】– Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics..
  • 【What you get】– Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock