Reviews 3d Printer Under 50000

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

3pcs DEVMO 3D Printer Limit Switch Mechanical Switch Module Endstops Switch with 39.4 inch Cable Compatible with Ramps RepRap Tevo Tornado

  • Compatible with Ramps Tevo 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: usedd for Tevo, if you want to in all creality 3D Printer, CR -10 CR 10S S4 ,S5.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • Under normal circumstances, the system must be configured to at least three mechanical switches.
Check Stock

2-Pack Long Lifetime 3wires 50x50x15mm DC Fans DC 5V Cool Blower Fan 5015 Extruder Hotend Cooler Front Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
  • Package:2piece 5015 Front hotend blower fan.
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

Monoprice Filament Guiding Tube Designed for MP10 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise，it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

Monoprice Filament Guiding Tube Designed for MP10 Mini 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

Monoprice Accessory Kit Made for Monoprice Maker Select V2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: Always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service And Support : You're never on your own with Monoprice products! We have a full team of and knowledgeable technicians available to answer your questions, both before and after your purchase.
Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

  • 3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
  • 3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
  • Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
  • Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
  • 3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.
Check Stock

Monoprice Replacement Filament Sensor Designed for The Monoprice Maker Ultimate 2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

KACSOO Mini 3D Printer for Beginners, Building Size 100 x 100 x 100MM Portable Desktop with 10M 1.75mm PLA Filament, Magnetic Removable Plate (Blue)

  • Excellent Printing Performance:The mini 3D printer has a printing size of 100*100*100mm, Fits 1.75mm diameter PLA and TPU filament. The accuracy is 0.1mm, which allows a smooth and beautiful printing performance..
  • Quick Assembly:This 3D printer kit contains 3 main parts. According to our instruction manual, it only takes 5 minutes to complete the assembly.If you cannot move the shaft of the printer, please check if the connecting cable is loose..
  • Simple Operation:User can set Filament feed-in or draw out with the buttons of + and -.it is already 99% Pre-Assembled Entry-Level Printer. There are three DIY modules in total, which can be completed in 5 minutes under the guidance of the manual..
  • Stable & Ultra Silent:The 3D printer is compact and sturdy, it keeps stable while printing and the working noise is lower than 60 db, so you will not be disturbed by noise when working or sleeping. You can complete various artworks,handicrafts and samples successfully..
  • Package & Service:3D printer x1, Screwdriver x1, Power adapter x1, USB data line x1, Filament bracket set x1, Printing Filament x10M, TF Card x1, Card Reader x1, Canual x1. We provide you with 24 hours after-sales service..
Check Stock

Monoprice Replacement 3D Printer Extruder Maker Select Mini for PID 15365, 21711 and Mini PRO 33012

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Moonrise rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service & support: you're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase.
Check Stock