Reviews 3d Printer Nozzle Kit

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ....15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
  • And the supporting tools make it more convenient for you to install and save your time.
  • High precision: the inner wall of the 3D prin....
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best pr....
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

Athletivi Speed & Agility Training Set - Ladder Kit with Fixed-Rungs, Cones, and Resistance Parachute Improves Coordination and Speed. Set for Football, Soccer, Fitness Workout Athletes.

  • 【Widely Application】This Creality cr touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers).
  • 【Easy to install and easy to use】With instructions, you can choose a suitable mounting bracket to install this CR Touch Auto Leveling Kit to your 3D printer, and download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on..
  • 【Independent research and development Stable function】CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times..
Check Stock

Suteck 3D Printer Tool Kit 45 PCS Including Carving Knife Set Cleaning Needle Tweezers Pliers Scraper Basic Tools with Storage Bag for Removing Fishing 3D Printer

  • ...to process the print details, remove excess materials and burrs, and complete your work quickly and efficiently.
  • 【Cleaning Needles and Tip Pliers】The round transparent plastic tube is equipped with 10 pcs 2.75" and 4.13" cleaning needles, which can be used to solve the problem of clogging of the nozzle of the 3D printer. You can also use the tip pliers to quickly clean up the excess filament generated during the 3D printing process.
  • 【Perfect Gift】If your friends and family are interested in 3D printing, you can give them 3D printer tools as gifts and they will be very happy. Because the printer 3D kit contains 45 pcs 3D printing tools and is easy to carry and use, which can meet all their needs, especially for beginners and model making enthusiasts.
Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

  • 3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
  • 3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
  • Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
  • Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
  • 3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock