Reviews 3d Printer Build Plate 2

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

FULAMENT Fula-Flex Resin Sheet for 3D Printing - 150mm x 95mm - Flexible Stainless Steel Printer Build Plate

  • [ EASY TO INSTALL ] - Fulament’s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from....
  • [ EASY TO REMOVE PRINTS ] - Keeping our customers’ needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing....
  • [ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the....
  • [ COMPATIBILITY ] - This 150mm x 95mm resin plate fits Elegoo Mars 3.
  • [ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed....
Check Stock

MakerBot Replicator + 3D Printer with swappable Smart Extruder+ Black MP07825EU

  • Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power....
  • Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements –....
  • Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill,....
  • The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components.
  • Winner of PC Mag Editor’s Choice Award, iF Design Award, Techcrunch best Classroom 3D printer.
Check Stock

Monoprice Replacement Flexible Build Plate - Black for Use with All Models of The MP Voxel 3D Printer

  • This is a replacement build plate for the Moonrise Voxel 3D Printer.
  • Please use care when changing the build plate, or any component, on your 3D printer..
  • Service & Support : Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs..
  • You're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions.
  • Quality at a Fair Price: Moonrise's rugged design and rigid quality control standards deliver high quality products at fair prices..
Check Stock

Monoprice Select Mini 3D Printer v2 - White With Heated 120 x 120 x 120 mm Build Plate Fully Assembled + Free Sample PLA Filament MicroSD Card

  • Support for All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament,....
  • Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk..
  • Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even....
  • Sample Filament diameter- 1.75mm, Filament size spool/sample- about 10ft. One sample print, Filament Color- natural/clear.
  • Heated aluminum build plate nozzle cooling fan for printing all filament types. Complete kit with sample PLA filament, bed scraper, and MicroSD card....
Check Stock

ELEGOO Building Plate for Mars 2 and Mars 2 Pro LCD 3D Printer with Anti-Slip Hexagon Socket Screws and Sandblasted Surface Compatible with Mars 2 and Mars 2 Pro

  • ➤【MINGDA Original Plate】MINGDA original removable build plate platform for 3d printing. Size 235*235mm, compatible with common 3d printers....
  • ➤【Fast Heating】Use advanced tech, which has good thermal conductivity, it will heat up to 90℃ in 5 minutes. The first layer is easier to stick....
  • ➤【Super Suction】The print bed itself has no adhesive or paper backing. But strong magnetic, the adsorption is firm and will not slide..
  • ➤【Flexible Build Plate】The magnetic plate is flexible and removable, easy to remove models without tool..
  • ➤【Customizable】The flexible 3d printer plate surface can easily be cut to any demensions making it perfect for all build sizes and all FDM....
Check Stock

Gargle Water Salt Rinse Mouthwash 12 fl Oz Natural Remedy for Irritated Throat Soothe The Throat with Formula Free of Alcohol Drugs or Dyes Mix of USP-Grade Sodium Chloride and Purified Water

  • REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build....
  • SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to....
  • RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages..
  • SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish....
  • WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service..
Check Stock

KIMME 1pcs Build Plate for Flashforge Finder 3D Printer

  • Flashforge Adventurer 3C, as a stripped-down version of Adventurer 3, remains main functions, making it a super cost-effective leveling-free 3d....
  • Out of the box,leveling-free, removable and heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG....
  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily . at the same time , it can minimize....
  • Detachable nozzle & fast heating: remove the nozzle from extruder just in one push.
  • Flashforge 3d printer Adventurer 3C,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

SUNLU 3D Printer S8 Plus FDM 3D Printer with Big Build Volume 310x310x400mm 3D Printing Size Resume Printing Function Fast Assembly DIY 3D Printers Comes with a Roll of PLA Filament

  • ①【Large Build Volume】SUNLU new FDM 3D printer S8 Plus, 310x310x400mm large printing size printer, do not need to print items in parts, save time....
  • ②【Quick Installation】95% pre-assembled, the printer can be used in a few simple steps after receiving. Disassembly is as simple as assembly,....
  • ③【Double-sided Movable Plate】The SUNLU S8 printer is equipped with a double-sided use glass bed/plate, one side has smooth glass surface, the....
  • ④【Resume Printing Function】Users can pause printing at any time, and resume printing after adjusting the filament. Don't need to be afraid of....
  • ⑤【Upgrade Parts】 Compared with the S8 version(SUNLU S8 3D Printer), S8 PLUS 3D Printer has been improved the Extruder Spring, Swing-Arm,....
Check Stock