Reviews 30km Without Optical Attenuation

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

  • ...lection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

  • ...lection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ...ed curve files to U disk, set storage path, etc.Built-in 8G TF card memory, can store a large amount of curve data..
  • ✅【Network & Camera Test】WANLUTECH MT-8000 is not only an OTDR tester, but also a CCTV tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP analog, HD coaxial cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables..
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Simplex 9/125 LC to LC Singlemode Jumper - 3 Meter (9.84ft) | Length Options: 1-3M | single-strand smf smplx lc/lc 10gbase 1f yellow ofnr pvc lc-lc

  • ... assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702.
  • Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority..
Check Stock

uxcell ST Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell FC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell SC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell SC UPC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell FC UPC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Fiber Attenuator Singlemode Simplex LC/UPC Fixed 2dB

  • [MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Networx Fiber Optic Attenuator, Fixed - LC/UPC 20dB

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

  • 【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
  • 【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
  • 【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
  • 【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
  • 【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
  • 【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..
Check Stock

LC to SC Fiber Patch Cable Multimode Duplex - 3m (9.84ft) - 50/125um OM2 (2 Pack) - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality LC to SC Fiber Patch Cable 50/125 OM2 Multimode fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, commercial, LAN, SAN, building backbone, riser and horizontal applications. It supports video, data and voice services..
  • This Beyondtech Fiber OM2 50/125 LC/SC Fiber Patch Cord conforms with ITU-T G.651.1, TIA/EIA 492AAAB and IEC60793-2-10 A1a.1a standards and complies with RoHS specifications..
  • This MM fiber has an orange color jacket with a 3.0mm diameter. OM2 cables have a 500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources and a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength..
  • This LC to SC Multi mode Duplex OM2 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OM2 patch cords are suitable for backbone, riser and horizontal configurations..
Check Stock