Reviews 3000psi Flange Clamps

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

Drop-in Anchor, No-Flange, 1/4-20x1in, PK20

  • 003cb003ePrice For:003c/b003e Each 003cb003eMeets/Exceeds003c/b003e: U.S. GOV G.S.A. FF-S-325 GR VIII, Type 1 003cb003eDrive Tools003c/b003e: 4XMF2 003cb003eType003c/b003e: Non-Flange 003cb003eDrill Bit Size003c/b003e: 3/8" 003cb003eLength003c/b003e: 1" 003cb003eMin. Hole Depth003c/b003e: 1" 003cb003eBolt Dia.003c/b003e: 1/4" 003cb003eAnchor Dia.003c/b003e: 3/8" 003cb003eThread Depth003c/b003e: 3/8" 003cb003eUltimate Tension in 4000 PSI Concrete (Lb.)003c/b003e: 2104 003cb003eUltimate Shear in 4000 PSI Concrete (Lb.)003c/b003e: 1321 003cb003eUltimate Tension (Lbs.)003c/b003e: 2050.
  • 003cb003eUltimate Shear in 3000 PSI Concrete (Lb.)003c/b003e: 1321 003cb003eThread Size003c/b003e: 1/4-20 003cb003eUltimate Tension in 3000 PSI Concrete (Lb.)003c/b003e: 2077 003cb003eMaterial003c/b003e: Zinc Plated steel 003cb003eItem003c/b003e: Drop-In Anchor 003cb003eInstallation Turns003c/b003e: Until Set Tool Shoulders On Anchor Lip 003cb003eCountry of Origin (subject to change)003c/b003e: Taiwan.
Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
  • Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

0.5Mpa 1800r/min Gear Oil Pump, Insert Type Lubricating Cycloid Gear Pump Made of Iron(TOP-12A)

  • Chief Gear Pumps (3/4" DIA. Keyed Shaft).
  • SAE #12 Inlet and SAE #10 Outlet Ports, CW ROTATION.
Check Stock

Kuupo 796608 Carburetor Kit Tune Up for Briggs and Stratton 2700-3000PSI fit Troy Bilt Power Washer 7.75 Hp 8.75 Hp 8.5Hp 190CC

  • Carburetor replaces Briggs & Stratton 796608 591137 590948 594287 799248.
  • Fit for Briggs & Stratton 2700Psi 3000Psi 111000 11P000 121000 12Q000 111P02 121Q02 121R02 121S02 12Q902 Engines.
  • Fit for Troy-Bilt Pressure Washer 7.75Hp 8.75Hp 8.5HP 190CC 21″ XP TB350-XP Mower.
  • Fit for Briggs Stratton 775ex 875exi lawn mower.
  • Comes with: 1 carburetor, 2 fuel shut off valve, 2 fuel filter, 1 fuel line, 4 clamps.
Check Stock

Universal T04E T3/T4 .57 A/R 57 Trim Turbo Charger Compressor 400+HP Boost Stage III Universal Turbocharger

  • Application: Perfect for 1.5L-2.5L engines.
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar).
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns, Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern.
  • Specification: [Compressor: Trim: 55/A/R: .5.
  • Professional installation is highly recommended (No Instruction Included).
Check Stock

PCP air compressor 4500psi 300bar powered by 12v DC or 110v AC with power supply included for paintball tank pcp airgun scuba mini tank

  • ...cp compressor can fill a 500cc tank to 4500psi.
  • Easy to operate:Unlike other big compressor,it does not need oil and water,very convenient,comes with operation manual,it is very easy to use the compressor,our service team is always ready for any qustions you have.
  • Test filling speed:Benjamin Marauder Pistol (65cc): 0-3000 psi in approx 2.0 min Diana Stormrider (100cc): 0-3000 psi in approx 3.0 min Air Arms S510 Xtra FAC (231cc): 1450-2900 psi in approx. 3 min 20 seconds Ataman M2R Carbine Ultra Compact (130cc): 0-4350 psi in approx. 6 min Evanix Rainstorm (250cc): 0 - 3000 psi in approx. 7.5 minutes Airforce Texan (490cc): 0-3000 psi in approx. 15 min.
Check Stock

Yellow Jacket 49017 Digital Refrigeration Gauge

  • ...vaporation(Ev)/condensation(Co) are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do. It also could test the temperature of the refrigerant in the high/low-pressure pipes..
  • 【Superheat and Subcooling Test&Pressure Leak Test】When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking..
  • 【Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold】Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigerant into the pipeline. HVAC gauges is built-in 89 kinds of refrigerant pressure&temperature database. Before you fill refrigerant, you can set different types of working refrigerants according to the car needs to fill..
  • 【Refrigerant Observation Window & Large LCD Digital Display & Mu....
Check Stock

QiiMii Sanitary Stainless Steel 304 Tri Clamp Butterfly Valve with Pull Handle and Silicone, 1.5”Tube OD (1.5 INCH)

  • 200 PSI/13.8 bar non-shock cold working pressure.
  • Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners.
  • End of line service at 200 PSI with no downstream flange.
  • Compatible with Pipe Flange Classes: Class 125, Class 150.
Check Stock

Tippmann SO X7 Mil-Sim XP5 Paintball Straight Mag

  • Heavy Duty HPA tank fill whip 3000psi 4500psi line 34" length.
  • Time saving Fill Whip High pressure hose for HPA paintball tank rated 3000psi 4500psi working pressure.
  • 34" X-long braided flexible lines with 1/8" Male Nipple and 1/8" Female Quick Disconnect.
  • In-Flight refill HPA paintball tank or PCP.
  • TWO Quick release Disconnect for easy removal.
Check Stock

NIBCO LD-2000-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Aluminum Bronze Disc Lever-Lock Handle Lug 6

  • 200 PSI/13.8 bar non-shock cold working pressure.
  • Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners.
  • End of line service at 200 PSI with no downstream flange.
  • Compatible with Pipe Flange Classes: Class 125, Class 150.
Check Stock

Hurotoms Pressure Washer Sandblasting Kit - Wet Blast Gun Attachment, 5000PSI, 1/4 Quick Disconnect, with Replacement Nozzle, Safety Goggles

  • ...ings, anti-corrosion and wear-resistant, and is the best choice tool for cleaning needs such as car washing!! Make cleaning more efficient and professional while protecting your eyes!.
  • ▶ Hurotoms’ Sandblasting Kit◀ 1 * 10FT Hose, 1 * High Pressure Washer Wand (Water Inlet), 1 * Sand Wand (Sand Input), 4 * Hose Clamps (Snap), 4 * Ceramic Nozzles (with 4 Leakproof Ring Included), 1 Pair of Goggles.
Check Stock

Maddog Heavy Duty Paintball Tank Remote Coil - Compressed Air (HPA) / CO2

  • Choose Quick Disconnect, Slidecheck, or Pro Push-Button Quick Disconnect.
  • Move the BULK weight of the tank OFF your marker and into a pouch!.
  • Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems.
  • CA Adapter attaches to any paintball marker Including Tippmann TMC, 98, A5, X7, Cronus, Alpha Black, Alpha Black elite, TCR, Stryker, Stormer. Spyder Fenix, Victor, Agressor, Xtra, Compact, VS Series, JT, Brass Eagle and More.
  • Remote Works with all standard paintball tanks including HPA/Compressed Air, 13/3000, 26/3000, 35/3000, 48/3000, 62/3000, 45/4500, 50/4500, 68/4500, 70/4500, 80/4500, 88/4500 & 90/4500. Also Works with standard CO2 tanks 4oz, 9oz, 12oz, 16oz, 20oz and 24oz. And many Airsoft HPA Setups..
Check Stock