Reviews 3 Turndown Exhaust Tips

Upower Dual Exhaust Tips 2.25 inch inlet 3 inch outlet 9.2" Long Vacuum Plating Blue 304 Polished Stainless Steel Weld on Staggered Exhaust Tailpipe Tips 2.25" to 3"(Pack of 2)

  • 【Design】2.25 ID Weld On - Double Wall Angled Cut - Rolled Edge-Staggered-Offset Exhaust tips.
  • 【Material】Mirror Polished T304 Stainless Steel Exhaust Tip.High Quality Vacuum Plating Blue.Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits trucks pickup car with 2.25" INLET Exhaust Tailpipe Tips system. NOTICE: Before purchasing, Pls kindly check the size of your factory exhaust tip..
  • 【1 Year Warranty】Pack of 2 dual exhaust tips.
  • No instruction is included. Professional installation is highly recommended..
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

4Pcs Black Exhaust Tips Muffler Tips Compatible With BMW F87 M2 F80 M3 F82 F83 M4 F10 M5 F12 F13 M6 Stainless Steel Muffler Tip-2.75in Inlet

  • 【Universal Fitment】- The 4pcs 2.75 inlet exhaust tips fit for BMW F87 M2 F80 M3 F82 F83 M4 F10 M5 F12 F13 M6..
  • 【High quality steel】- The f87 m2 exhaust tips for BMW are designed with durable SUS304 stainless steel . Protect your original pipe from sun and....
  • 【Effect】- The f80 m3 exhaust tips for BMW can protect the exhaust pipe from sun/rain and avoiding rusting and deformation, giving you car a better....
  • 【Easy installation】- No welding,no drilling and no bolting on. The f82 m4 exhaust tips for BMW can be easily installed on. Remove the original....
  • 【Warranty】- Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

PRETTYGARDEN Women's Romper Dressy Summer 2023 Wrap V Neck Short Sleeve Wide Leg Shorts One Piece Jumpsuits (Black,Medium)

  • ...t Is Also Light And Breathable And More Suitable For Summer. Get It And Give Your Closet A Makeover!.
  • EYE-CATCHING DESIGNS: Short Sleeve Rompers For Women/ Wide Leg Shorts Jumpsuit/ One Piece Jumpsuits/ Rompers For Women Summer Casual/ Dressy Rompers/ Rompers With Pockets/ Turndown Collared Rompers/ V Neck Rompers/ High Waist Jumpsuits.
  • MATCHING STYLE: Shorts Rompers Go Well With Sneakers, Sandals, Heels, Handbags, Necklace For A Casual And Chic Style, And You Can Match It With Coats, Jackets For A Fashionable Look In Cold Days. Perfect For Party, Date, Wedding, Beach, Vacation, Prom, Cocktail, Evening, Club And Casual Daily Wear.
  • SHOWING OFF YOUR CHARMING! Wrap V Neck Romper Highlights Your Sexy Neckline While The Snap Protects You From Exposure. Wide Leg Shorts Jumpsuit Is Suitable For Many Body Shape, And The Loose Fitting Style Makes You More Comfortable And Feels Cool. High Waist Rompers Accentuates Your Long Legs. Womens Turndown Collared Romper Is More Flattering To Your Shoulder And Neckline, Simple Yet Elegant.
  • A VARIETY OF CHOICE: Black Jumpsuit For Women Dressy/ Navy Rom....
Check Stock

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.
Check Stock