Reviews 3 Time Relay

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

• 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
• DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
• 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
• 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
• 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

• The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
• 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
• Equiped with high-current relay, AC250V 10A.
• DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
• You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..

Juried Engineering PTC PT2399 Echo Audio Processor Guitar IC DIP-16 (Pack of 20)

A/C Clutch Fan Relay 90987-02028

• Description: 4 Pin relay, Volts: 12V, Made in Japan by Denso.
• OEM Part Number: 90987-02027, 90080-87026, 90987-02028 Denso 156700-2870, 156700-2840 Genuine Toyota/ Lexus Part.
• Easy To Fix: The ac relay is simple in structure, great replacement for your original one, fix it takes only several minutes, easy to replace, save your time and money..
• Guarantee Quality: Make in Japan, each relay has been professionally tested for use before packing, make confirm it can be work well..
• Guarantee Service: Considering the applicability, we kindly suggest to check carefully whether our OE part number is the same as your original one before purchase, and any question please contact us freely, we are glad to help. (Note: Our relay provides 1 year’s free replacement warranty and 3 months no reason back full money if meet quality problem).

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Time Adjustable Delay Relay

• This Relay Delay Switch is easy to use when you are familar with the operation.
• Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
• There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
• Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
• With the Relay Module Controller, your life will be more intelligent and convenient.

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Industrial Control Components-Module

• This Relay Delay Switch is easy to use when you are familar with the operation.
• With the Relay Module Controller, your life will be more intelligent and convenient.
• Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
• There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
• Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.

70955

• FEATURES: 12 position terminal block for accessory attachment.
• 6 40-amp cube style relays (plug-in style).
• 6 Diodes to prevent LED “field collapse”.
• Inline 50amp manual resetting circuit breaker.
• 8 gauge power leads with crimped and soldered terminal for connection to the battery.
• Integrated LVCO (Low-Voltage-Cut-Off) circuit.
• Fuse for LVCO which can be removed to bypass the LVCO.
• High-temp, abrasion resistant wiring cables.
• KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.

Inkbird PID Temperature Controller Kit High Voltage 100ACV to 240ACV Comes with SSR 40DA Solid State Relay K Type Thermocouple and White Heat Sink

• 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer..
• 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller.
• 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included.
• 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading.
• 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time.

Solid State Relay, 90 to 280VAC, 25A

• Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
• Model: XRE-1D4840 Solid State Relay 40A DC to AC..
• Input voltage: 3-32V DC Output voltage: 24-480V AC.
• Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
• Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

• 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
• 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
• 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
• 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
• control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
• 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

5 Pin 12V Relay 12V 30A Relay Multi Purpose Automotive Relay Black Starter Relay Car Heavy Duty Relay for Car Motor Automotive Replacement Accessories 4 Pieces

• Sufficient for using: you will receive 4 pieces 12V 30A 5 pin relays, the size is about 1.41 x 0.94 x 0.63 inch/ 3.6 x 2.4 x 1.6 cm, enough quantity....
• Stable for long time use: the black shell of the 12V car relay is made of nylon material which is electrical insulation, the pin is made of brass,....
• Easy to use: the motor relay is suitable for normal automobile use and simple to operate, you just need to connect the relay with the wire, no other....
• Specifications information: 30A 12V Relay can be applied to control electrical circuits for components on a vehicle that have a high amperage load,....
• Extensive usages: the automotive relay is practical and convenient, can be applied to car tail light, engine compartment, electric cooling fans,....

2 Pack AC Relay 90080-87026 90987-02027 90987-02028 Compatible with 1997-2014 Toyota Lexus and Scion Vehicles

• Description: 4 Pin relay, Volts: 12V, Made in Japan by Denso.
• OEM Part Number: 90987-02027, 90080-87026, 90987-02028 Denso 156700-2870, 156700-2840 Genuine Toyota/ Lexus Part.
• Easy To Fix: The ac relay is simple in structure, great replacement for your original one, fix it takes only several minutes, easy to replace, save your time and money..
• Guarantee Quality: Make in Japan, each relay has been professionally tested for use before packing, make confirm it can be work well..
• Guarantee Service: Considering the applicability, we kindly suggest to check carefully whether our OE part number is the same as your original one before purchase, and any question please contact us freely, we are glad to help. (Note: Our relay provides 1 year’s free replacement warranty and 3 months no reason back full money if meet quality problem).

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

• Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
• Kit Includes 5 Relay Adapters and blow mold case.
• Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
• Tests 5 different relays, both 12V and 24V.
• 3 diagnostic trouble codes help define the cause of the bad relay.
• #193 Kit Includes 5 Relay Adapters and blow mold case.
• Quick off-the-car relay tester - checks relay coil & switch contacts.