Reviews 3 Port Test Valve

Shower Diverter Rough-in Valve Replacement for Delta R11000 3, 6 Setting

  • BRASS CONSTRUCTION - Forged from solid brass.
  • 3 PORT DIVERTER - Controls direction of water from mixing valve to desired application.
  • DIVERTER ONLY - Must combine with Delta R10000 for temprature control.
  • PRESSURE TEST - Pressure test cap allows for testing before installation. Can be tested with air (200 psi) or water (300 psi).
  • AFTERMARKET PART - For use with Delta 3 or 6 function diverter trims.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • ...tronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color coded scale, helps to monitor vehicles' fuel pressure easily. Equip with pressure relief valve and 16" drain hose for safer pressure discharge and fuel recovery. Reliable nylon resin hose is resistant to fuel, wear and corrosion.
  • CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can c....
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

ATIE Neverlube Valve Cover/Cap 4606 with O-ring 1132+ and Shaft O-ring R0487100 Replacement For Zodiac Jandy Black/Gray 3-Way/2-Way Valve Covers 4606+, 1303+, 4734+, 1304+

  • Replace/Fit Jandy black 3-Port valve cover 4606+ and gray 3-Port valve cover 1303+.
  • Also Replace/Fit Jandy black 2-Port valve cover 4734+ and gray 2-Port valve cover 1304+.
  • Package Included: 1 Valve cover/cap, 1 Valve O-ring, and 2 Shaft O-rings.
Check Stock

Solimeta 2 Economical Gas Test Pressure Gauge,0-30 PSI

  • Residential & commercial pressure testing of natural gas, air and water lines..
  • Economical pressure gauge and valve body assembly used for pressure testing..
  • Bleed port and plated housing on the gas test assembly..
Check Stock

Monoblock Hydraulic Directional Control Valve, 3 Spool, 11 GPM, SAE Ports

  • Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3600 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
  • Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
  • Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
  • Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
  • Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock

American Standard RU101SS Flash Shower Rough-in Valve with Universal Inlets and Outlets with Screwdriver Stops, Unfinished

  • Choice of Connections: Fast and easy installation without adaptors reducing leak points.
  • Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs.
  • Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water.
  • Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation.
  • Test Cap: Allows valve body to be tested and flushed without the presence of the valve cartridge.
  • Can be tested using test cap with air (200 psi) or water (300 psi).
  • Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws.
  • Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
  • Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation.
  • It can serve as mounting support for thin wall installations.
  • Back to Back Capability: Hot and cold can be reversed quickly and easily.
  • Wide Rough in Range: From 1-3/4 Inches to 2-3/4 Inches from finished wall to the back of the valve.
  • Includes Screwdriver Stops for easy servicing at the valve.
Check Stock

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

  • 【Product Features】3/4 inch IPS isolation tankless water heater service valve kit includes hot and cold isolation valves(600 WOG) and pressure relief valve (150 psi/200K BTU). Colored valve handles for easy identification and use of hot and cold valves. Integrated drain valve with brass safety cap providing easy maintenance. Full port ball valve for better flow rate..
  • 【Widely Use】: The 3/4 inch size tankless kit is suitable for most American residential use, including domestic and commercial tankless gas water heater brands such as Rheem,Rinai, Ecosmart,Navien,Noritz,Takagi,Bosch and so on..
  • 【LEAD FREE Certification】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
  • 【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
  • 【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a r....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ... range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended refer....
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...l Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and....
Check Stock

GlowShift Diesel Gauge Package Compatible with Dodge Ram Cummins 2500 3500 1994-1997 - Black 7 Color 60 PSI Boost, 1500 F Pyrometer EGT & Transmission Temp Gauges - Black Triple Pillar Pod

  • ...ack Dial, Clear Lens, 7 Solid Color Modes & 2 Color Cycle Modes.
  • Black Triple Pillar Gauge Pod for 1994-1994 Dodge Ram 2500 3500 Trucks Mounts 3 Gauges to the Truck's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar - Manufactured from ABS Plastic - Includes Mounting Hardware.
  • Includes Dodge Ram 12-Valve Cummins Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing & Wiring this Diesel Gauge Package to Your Truck.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Swimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port

  • Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
  • Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
  • Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
  • Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
  • 100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock

KOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs

  • For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
  • Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
  • Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
  • Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
  • Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check Stock