Reviews 3 Port Stop Valve
Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers
- 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
- 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
- Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
- 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
- 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check StockEZ-Fluid 5/8\ Comp. O.D X 3/8\ Comp X 3/8\ Comp 1/4 Turn Double Handles Chrome Brass Angle Stop Valve Water Shut Off Ball Valve For Water Pipes Lead Free,For Faucet Toilet Valve ,Dishwasher,Filter (1)
- Quarter Turn Two Handles 3 Way Angle Water Stop Valve Chrome Brass Water Shut Off Valve ,Angle Stop Valve Use for Faucet Water Valve and Toilet Water Valve,Filter,Dishwasher..
- 5/8" Comp x 3/8" Comp x 3/8" Comp Double Handles ,Perfect solution for double sink vanities, or connect to dishwasher..
- EZ-Fluid 1/4-turn Handle Angle stop valves Compatible with copper or Pex Water Pipes (PEX installations require Plumbing Pex tube insert Pex fittings) ,also Available in Pex Valve,cUPC,Lead-Free..
- 5/8" OD Comp. x 3/8" OD Comp. X 3/8"OD Comp. Dual Handles Angle stop ball valve Fits 1/2" Copper Pipe, it supplies toilet water supply hose,faucet supply line and Dishwasher, Great choice use as Toilet Valve,Facuet Valve,Dishwasher,Filter..
- EZ-Fluid Dual Handles Angle Stop Valve 1/2 Nom. (5/8" OD Comp)x 3/8" OD Comp X 3/8" OD Comp Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953 , Dual outlet shut off valves Allows you to turn off water to one source.
Check StockYUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter
- 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
- Suitable for both cold and hot water systems.
- 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
- 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
- 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
- This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
- 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check StockATIE Neverlube Valve Cover/Cap 4606 with O-ring 1132+ and Shaft O-ring R0487100 Replacement For Zodiac Jandy Black/Gray 3-Way/2-Way Valve Covers 4606+, 1303+, 4734+, 1304+
- Replace/Fit Jandy black 3-Port valve cover 4606+ and gray 3-Port valve cover 1303+.
- Also Replace/Fit Jandy black 2-Port valve cover 4734+ and gray 2-Port valve cover 1304+.
- Package Included: 1 Valve cover/cap, 1 Valve O-ring, and 2 Shaft O-rings.
Check StockEZ-Fluid 1/2\ Nominal Comp (5/8\OD Comp) x 3/8\ OD Comp 1/4Quarter Turn Handle Chrome Brass Angle Stop Valve Water Shut Off Ball Valve For Water Pipes Lead-Free, For Faucet,Toilet, Sink Valve (10Pcs)
- Chrome Brass Water Shut Off Valve ,Angle Stop Valve Use for Faucet Water Valve and Toilet Water Valve.
- Pack of 10 Pcs Angle Stops Contractor Pack.
- EZ-Fluid Quarter 1/4-turn Handle Angel stop valves Compatible with copper or Pex Water Pipes (PEX installations require Plumbing Pex tube insert Pex fittings) ,also Available in Pex Valve.
- 5/8" OD Comp x 3/8" OD Comp angle stop ball valve Fits 1/2" Copper Pipe, it supplies Hot Cold Water For Faucet,Toilet water supply line and faucet supply line Great choice use as Toilet Valve,Faucet Valve.
- EZ-Fluid Angle Stop Valve 1/2 Nom. (5/8" OD Comp)x 3/8" OD Comp Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953.
Check StockMonoblock Hydraulic Directional Control Valve, 3 Spool, 11 GPM, SAE Ports
- Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3600 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
- Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
- Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
- Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
- Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check StockSwimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port
- Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
- Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
- Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
- Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
- 100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check StockKOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs
- For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
- Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
- Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
- Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
- Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check StockATIE Neverlube Diverter Valve Kit 4720 Replacement for Zodiac Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720 (3 Pack)
- Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
- Kit included: 3 Diverter Valve, 6 Shaft O-Rings, 3 Cap O-Ring, 3 Knob (black).
- Replace Zodiac Jandy 4720 Divert Valve Repair Kit.
- Fit the Jandy Never lube & Standard Valves.
- Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc
- ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
- ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
- ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check StockDishwasher Installation Kit - 10 FT Stainless Steel Braided Dishwasher Hose kit,Food Grade PEX Inner Tube Dishwasher Water Line with 3/8"x3/8"x3/8" Tee Stop Valve,3/8"x3/8"MIP Elbow,3/8"x3/4"FHT Elbow
- ...rsal Dishwasher Installation Kit】:Our dishwasher connection kit provides everything you need in connecting household water supply to dishwasher.
- suitable for most brand and models dishwasher,such as BOSCH,Samsung, GE, LG, Whirlpool, Frigidaire, etc..In particular the 3/8" x 3/8 "x 3/8" Comp tee stop valve, convenient for you add a branch waterways on the existing water supply and freely control on and off..
- 【Easy Installation】:The dishwasher water line each end has brass 3/8" compression fittings and built-in high-quality sealing ring,ensure a securely and solid connection.
- The tee stop valve and elbows with standard thread,plumber's sealant tape is also included in the kit.
- even DIY,your first installation or replacement work can be completed in minutes,and no leakage..
- 【Safe material】:Our dishwasher hose inner tube made by food grade PEX materials, non-toxic ingredients,odorless and tasteless, have tested to meet NSF/ANSI standards.
- the brass tee stop valve and elbows are lead free.Ensure you enjoy the convenience and safety that dishwashers bring to you and your family's lives..
Check StockChief G Series Hydraulic Directional Control Valve with Joystick, Hydraulic Flow Control Valve with 2 Spool 3-pos Spring Center - 10 GPM, 3625 PSI, SAE 8 Work, SAE 10 Inlet/Outlet Ports, 10 lb, 220910
- Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3625 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
- Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
- Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
- Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
- Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check StockEZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack
- 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
- Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
- 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
- Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
- IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock