Reviews 3 Inch Mufflers

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,BLACK,3" OFFSET IN-CENTER OUT

  • Brand New Flowmaster Super 10 Series Chambered Muffler, Black Paint Finish, 3" Offset In & Center Out (Holley Part #843016).
  • Flowmaster Super 10 Series 409S Stainless Steel, Single Chamber mufflers are intended for customers who desire the loudest & most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver max performance. Super 10 Series mufflers are constructed of 16-gauge 409S stainless steel & fully MIG-welded..
  • Features: Flowmaster Reliability | 409SS Stainless Steel Construction | Super Aggressive Sound | Flowmaster Chambered Technology.
  • NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check Stock

3 pcs 1/18" to 3-1/2" Exhaust Pipe Expander/Pipe Stretcher Kit/Muffler Pipe Expander/Tail Pipe Expander

  • ◇ Important : The previous product quality was not very good, we have asked the factory to improve the product quality, now the product quality is better than the previous one, please don't worry. If there is any quality problem, please contact us in time.
  • ◇ Features : This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes.
  • ◇ Funtion : The 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
  • ◇ Easy to use : Designed to quickly and easily straighten out clamp dents in mufflers .A simple wrench turn expands pipe for exhaust system repair and installation.
  • ◇ Contents: 1 X Small Expander: 1-1/8" to 1-3/4" 1 X Medium Expander: 1-1/2" to 2-1/2" 1 X Large Expander: 2-1/8" to 3-1/2" 6 X Extra O-Rings 1 X Blow Mold Storage Case.
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

SHARKROAD 4.0″ Chrome Slip Ons Muffler Exhaust For Harley Davidson 1995-2016 Touring,Fit Street Glide, Road Glide, Road King, Electra Glide, Ultra Limited, 21CB

  • ✅ “HEAD TURNING FOR HARLEY”. People hear you coming and going with these slip-on mufflers for Harley. Safer while driving on the way..
  • ✅”GET THE TONE YOU GO FOR AT A GREAT PRICE”. Great value, awesome tone! Best bang for your dollar with these slip on mufflers for Harley Touring 1995-2016 models. (O.D: 1.75 + 1.75 inch), not for other diameter headers..
  • ✅”GREAT VALUE, GOOD DEAL”. Updated powder coating gives the paint a great better adhesion and heat-resistant feature..
  • ✅ “INSTALLING WILL BE A BREEZE. NO MESS.” The whole process to install these slip on mufflers for harley davidson touring is only 15 minutes..
  • ✅ “ALL ESSENTIAL HARDWARE INCLUDED”. No frustration while doing installation..
Check Stock

TAILONZ PNEUMATIC Sintered Bronze Exhaust Muffler 1/8 Inch NPT - Brass Body (Pack of 10)

  • Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
  • These compact and inexpensive mufflers are easy to install and maintain, particularly suitable where space is limited..
  • They are used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise requirements..
Check Stock

Delkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers

  • Compatible with Delkevic street bike mufflers.
  • Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..
Check Stock

Doug's Headers DEC250A 2-1/2' Electric Exhaust Cut-Out

  • Stainless steel construction electric exhaust cut-outs in 2 1/2 inch and 3 inch diameters.
  • Rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal.
  • A pre-wired harness with an illuminated rocker switch is supplied for easy installation.
  • Un-cork your exhaust with the flip of a switch from you dash.
  • Ideal for race tracks that do not require mufflers.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Doug's Headers DEC300AK 3" Electric Exhaust Cut-Out with Hook-Up Kit

  • Stainless steel construction electric exhaust cut-outs in 2 1/2 inch and 3 inch diameters.
  • Rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal.
  • A pre-wired harness with an illuminated rocker switch is supplied for easy installation.
  • Un-cork your exhaust with the flip of a switch from you dash.
  • Ideal for race tracks that do not require mufflers.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch,2Pcs

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock