Reviews 3 5 To 1 8

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

(32 Pack) New Wood Fence Post Black Caps 6X6 (5 5/8\) Pressure Treated Wood Made In USA (32)

  • 4x4 (3-5/8" x 3-5/8") Plastic Black Fence Post Caps - 16 Pack.
  • Cap presses over the outside of a 4x4 (3-5/8" x 3-5/8") Post, a little flex, but will Not Stretch. Must be secured with nails or an adhesive that bonds to plastic and wood, should be pre-drilled if securing with nails.
  • Inside Dimension 3-5/8" x 3-5/8" Square, 1/8-inch-thick to protect your treated posts from water and sun damage.
  • Please take time to measure your post not all 4x4 post are the same dimension. These caps for Nominal 4X4 fence post that measure 3-5/8"x 3-5/8".
  • Dimensions - Measures Approximately: Inside Dimension: 3-5/8” x 3-5/8 inches.
  • Inside Cap Edge Height (Edge that Covers Post): 1/2 inch.
Check Stock

TEKTON 1/4 Inch and 3/8 Inch Drive 6-Point Socket & Ratchet Set, 45-Piece (3/16-3/4 in., 5-19 mm) | SKT95301

  • 1-pc. 1/4 in. hex x 3/8 in. drive power socket adapter.
  • 7-pc. 3/8 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • 1-pc. 3/8 in. drive spark plug socket: 5/8 in..
  • 1-pc. 3/8 in. drive 90-tooth quick-release ratchet: 8 in..
  • 1-pc. 3/8 in. drive extension bar: 6 in..
  • 1-pc. reducer: 3/8 in. drive (F) x 1/4 in. drive (M).
  • Complete set has every size from 3/16 to 3/4 inch and 5 to 19 mm.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
  • Includes tools not found in most sets like a universal joint, power socket adapter, screwdriver bit adapter, and extension.
  • Strong resilient storage case with built-in parts tray keeps everything organized.
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Oster Professional 10 Comb Set Specially Designed to Fit Oster Clippers.

  • Specially designed to fit Oster Clippers and almost any other clipper available.
  • Includes: # 0 (1/16"), #1 (1/8"), #2 (1/4"), # 3 (3/8"), #4 (1/2"), #5 (5/8"), #6 (3/4"), # 7(7/8"), # 8(1"), #10 (1 1/4").
  • The item is for the Classic 76 style clippers so it will not fit with trimmers by Oster that is a separate item (76926.800)..
Check Stock

AVENGERS INFINITY WAR MARVEL CHARACTERS LOGOS SET OF 10 SPECIAL OCCASION COOKIE CUTTERS BAKING TOOL MADE IN USA PR1089

  • COOKIE CUTTERS FOR BAKING, PLAY AND MORE - Use for traditional sugar cookies, fun shaped sandwiches, children’s supervised play, art projects, and so much more.
  • SIZE - Hulk: 3 1/4" x 4" X 5/8" Iron Man: 4" X 2.5" X 5/8" Thor Hammer: 3 7/8" X 3 7/8" X 5/8" Captain America: 3 1/2" X 3 1/2" X 5/8" Avengers Logo: 3 1/2" x 4 1/8" x 5/8" Black Panther: 2 3/4" x 3 3/4" x 5/8" Spiderman: 3 1/4" x 4" x 5/8" Dr. Strange: 3 1/2" x 2 1/2" x 5/8" Starlord: 3" x 4 1/4" x 5/8" Black Widow: 3 1/2" x 3 1/2" x 5/8".
  • MADE WITH A FOOD-SAFE PLASTIC - Manufactured with pride in the USA.
  • USE INSTRUCTIONS - Coat both towel-dried cookie cutter and dough surface completely in flour before use. Apply even pressure across entire cutter when pressing into dough. Re-coat in flour before each use.
  • CARE INSTRUCTIONS - Hand wash only in warm, soapy water. Not dishwasher or oven safe.
Check Stock

TEKTON 3/8 Inch Drive 6-Point Socket and Ratchet Set 73-Piece 1/4-1 in 6-24 mm SKT15311

  • Includes 15-pc. 3/8 in. drive 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • 15-pc. 3/8 in. drive deep 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • 19-pc. 3/8 in. drive 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • 19-pc. 3/8 in. drive deep 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • 2-pc. 3/8 in. drive extensions: 3, 6 in..
  • 1-pc. 3/8 in. drive quick-release ratchet: 8 in..
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
Check Stock

Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch.
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch.
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • [ Excellent Performance ] This tap and die set is ideal for cutting and renewing external and internal threads on most metals to exact standards. The tapered teeth of these threading tools are specially designed to start threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/....
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • Our New MotoBox has everything you need to make sure your bike is dialed in..
  • Designed for professionals and the weekend warriors, it's the perfect set up to have in the pit or in the back of the truck..
  • 12-Piece 1/4" Metric drive 6-Point socket set (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm). 7-Piece 3/8" Metric drive 6-Point socket set (15, 16, 17, 18, 19, 20, 21mm). 5-Piece 1/2" Metric drive 6-Point socket set (22, 24, 27, 30, 32mm). 10" Groove joint water pump pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-....
Check Stock

Tosnail 12-Inch 3 Layers Plastic Craft Organizer Box Storage Container First Aid Carrying Case for Sewing, Painting, Arts - Clear

  • Overall Size: 12-3/4" L x 7-1/2" W x 6" H.
  • Inner Size: 12-1/8" L x 6-5/8" W x 3-1/8" H..
  • Features 2 interior cantilever trays with dividers to help keep your belongings organized. Made of plastic, BPA free. Clear box design for convenient see through..
  • The top tray with 4 compartments, large is 8” x 2-5/8” x 3/4” D, small is 2-5/8” x 2-5/8” x 3/4” D.
  • the bottom tray with 5 compartments, large is 5-3/4” x 3” x 1” D, medium is 5-3/4" x 2" x 1” D, small is 5-3/4” x 1-3/4” x 1” D..
  • The latch lock helps keep your items secure, and the top handle allows for easy portability..
  • Great organizer for your paint, craft supplies, fishing tackle, sewing notions and more organized portable and easy to access..
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

WORKPRO 3-Piece Step Drill Bit Set,1/4” 3/8” Universal Shank High Speed Steel Titanium Coated Drill Bits for Plastic, Sheet Metal, Aluminum Hole Drilling, Well-Organized Bag Included,SAE

  • Durable & Sturdy Material:High speed steel along with titanium coating ensures outstanding durability and sharpness for plastic, aluminum, copper, stainless steel hole drilling.
  • Two Flute & Tri Shank:Two-flute design provides faster, smoother, accurate cutting and prevents metal scurf from flying around for improved safety.
  • tri-flatted shank for a secure fit into power tool chucks, eliminating slip.
  • Universal Compatibility :1/4 “or 3/8” rods compatible with most power drilling tools.
  • Size: Bit #1 (6 steps 1/4″ shank):3/16″, 7/16″ 3/16″,1/4″,5/16″,3/8″,7/16″,1/2″.
  • Bit #2 (9 steps 3/8” shank): 1/4″,5/16″,3/8″,7/16″,1/2″,9/16″,5/8″,11/16″,3/4″.
  • Bit #3 (16 steps 3/8” shank): 1/4″,5/8″,3/8″,7/16″,1/2″,9/16″,5/8″,11/16″,3/4″,13/16″,7/8″,15/16″,1″,1-1/16″,1-1/8″,1-3/16″,1-1/4″.
  • A well-organized bag included to provide users with easy storage and transport.
Check Stock