BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black
- ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
- ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
- ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
- ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
- ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock5’’ Inch TFT LCD Car Color Rear View Monitor Screen for Parking Rear View Backup Camera with 2 Optional Bracket(Suckers Mount and Normal Adhesive Stand), Camera not Included, Monitor Only
- 5” Inch Digital TFT LCD Color Monitor Screen for Car Rear View Parking Backup Camera, Camera not included, Monitor Only.
- Anti-glare High Resolution,800(RGB)X480, 5-inch TFT LCD screen with excellent color.
- Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
- Perfect companion product for a Chuanganzhuo’s backup camera,Automatically starts when the car back up, video opened at the same time.
- Package content:1 x 5″ TFT LCD Monitor.
Check StockDIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only
- ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
- ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
- You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
- If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
- ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check StockBIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi
- 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
- 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
- with a capacitive touch panel. Supports 5-point touch..
- 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
- 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
- 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
Check Stock3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin
- 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
- 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
- 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
- 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
- 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock
NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)
- Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
- Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
- You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
- NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
- Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..
Check Stock7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor
- 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
- Capacitive touch panel, support 5-point touch.
- Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
- Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
- DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check StockArchos 5 250 GB Internet Tablet
- It supports MPEG-4, WMV, and M-JPEG and MP3, WMA, Protected WMA, WMA pro 5.1, WAV..
- It has 250 GB capacity for up to 300 movies, 2.5 million photos, or 145,000 songs..
- NOTE: For best experience, fully charge your device before turning it on (about 8 hours)..
- It plays Up to 22 hours music and 7 hours video playback time on a single charge..
- NOTE: For best experience, fully charge your device before turning it on (about 8 hours).
- 250 GB capacity for up to 300 movies, 2.5 million photos, or 145,000 songs.
- Up to 22 hours music and 7 hours video playback time on a single charge.
- Audio support: MP3, WMA, Protected WMA, WMA pro 5.1, WAV.
- Plug-ins available for further video and audio format support.
Check StockGarmin Alpha 100 TT 15 Dog GPS Bundle
- Preloaded TOPO U.S. 100k maps.LED beacon lights and Rescue mode as well as Stimulation levels-Tone and Vibration.
- 1-inch black collar strap, 5-inches standard and 13-inches extended range antennas.
- High-Sensitivity GPS with GLONASS. Display size is 1.53 wide x 2.55 high in inches and 3 inch diagonal.
- Battery life 20-40 hrs. Display type : transflective, 65-K color TFT touchscreen.
- Setup virtual boundaries on your map and receive an alert, automatically sends signal to recall.
Check StockCelestron 44314 FlipView Handheld LCD Microscope (Grey)
- Handheld digital microscope with integrated 3-inch full color TFT LCD screen that flips out and rotates 270 degrees.
- Versatile ergonomic design can be used three ways: handheld, on a flat surface with flip out leg, or with the included metal stand and ¼-20 connection.
- 5 MP sensor and 5-element IR cut lens configuration captures high definition images and video.
- 10x to 120x magnification (up to 300x on PC).
- NOTE:Please refer to the user manual before use.
Check StockValkyria Chronicles Remastered: Full Avatar Pack - PS4 [Digital Code]
- 1. Energy-saving design using - power chip..
- 3. Add P1 P2 label, add 3MP1 jumper point..
- 4. PCB with higher quality than V1 and V2..
- 5. 3.5-inch a-Si TFT LCD screen with a resolution of 320 * 240, point-to-point full-screen display, high refresh rate, and bright colors.
Check Stock
Ejoyous Digital Video Camera, 16X Digital Zoom 1080P TFT Camcorder Small Size Lightweight Mini DV Video Camcorder for Video Camera Camcorders Kids Beginners Teenagers(Black)
- ...r sports such as cycling, mountaineering and running. This is the best gift for children: birthday, Christmas, holiday gift. Let your child enjoy photos/videos anytime, anywhere, and become a good partner for children..
- 【Simple Operation, Simple Control】This mini digital camera is easy to use and control, 2-inch color TFT display, supports photography and video, colorful, easy to record wonderful memories, can be played back and erased, let the happy time forever stay video inside.
- 【HD Video Recording】This digital camera is equipped with a 2-inch color TFT LCD SCREEN with 16X digital zoom, which can help you easily get clear shots and perfect shots. 3 video resolutions 1080*720, 640*480, 320*240, bring you ideal viewing experience.
- 【Cultivate Children's Interest】This digital camera is a selection of entry-level digital cameras. Compared to professional digital cameras, it is cheaper and more suitable for children and beginners. Cultivate children's brains for photography and children.
- 【Mini is Small, Light】This digital camera is small in design, the size is only 10*5.5*3.5cm/3.9*2.2*1.4in, firm and durable, can withstand falling and is easy to use. The light weight makes it easy for children to carry and does not cause additional bur....
Check Stock
BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer
- ❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
- ❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
- ❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
- ❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
- ❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and....
Check Stock
