Reviews 2ton Shop Press 2

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

IMAYCC Scissor Jack for Car - 2 Ton (4409 lbs) Car Jack Kit with Saving Effort Ratchet Design,Car Tire Jack for Auto/SUV/MPV (2 Ton)

  • 【 LOAD CAPACITY 】Car Lifting Range from 3.9" (100mm) to 15.2"(385mm). Max Load weight: 2.0 Ton (4,409 lbs). Car Jack Net weight 4.84 lbs (2.2kg)..
  • 【 UPGRADED SCISSOR JACK 】Bi-directional mechanical Design , Both sides move up at the same time, 90% less effort required to lift your vehicle and 2 times lifting speed compared with others..
  • 【 MORE STABLE & DURABLE 】Thicken and Enlarged base plate ensures a secure footing, Reinforced Rolled edges and made of Heavy-duty steel can withstands high pressure..
  • 【 UNIVERSAL CAR JACK 】Portable Scissor jack 2Ton Suitable for most vehicle: Sedan, Coupe, SUV, MPV, Hatchback, Crossover, Wagon and More.a good tire change kit for your vehicle..
  • You can also get a 1 year worry-free after-sale service( free exchange or 100% refund if product was defective as quality problems ).
Check Stock

Dulytek Retrofit Heat Caged Plate Kit 3 x 8 Anodized Aluminum Plates for 15-30 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 8" Dual Heating Insulated Plates For 15 - 30 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • For Pairing with Powerful Hydraulic or Air-Operated Shop Presses.
  • Precise Two-Channel Digital Controller with Temperature & Press Timer and Magnetic Feet.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK38), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

5080A Truck Front Leaf Spring Pin and Bushing Service Set (10 Tons of Hydraulic Force)

  • 20 TON PRESS: Used for parts straightening, bending, and pressing.
  • ADJUSTABLE HEIGHT FLOOR SHOP PRESS: Adjustable work height, multi-position bed.
  • WORKING RANGE: Hydraulic shop floor press working range: Max. height 31.5 inches.
  • PRESS PLATES INCLUDED: Hydraulic press machine set includes press plates.
  • FULL SPECIFICATIONS: 20 ton hydraulic press ram diameter: 1.8" (45 mm).
  • Working range: working range: Adjustable height with a max. height of 31.5 inches.
Check Stock

Pro-Lift B-002D Grey Hydraulic Bottle Jack - 2 Ton Capacity

  • Steel lifting saddle engineered to hold load securely.
  • Extension screw adjusts to accommodate desired work height.
  • Built-in bypass system protects against ram over travel.
  • Heat treated critical stress areas ensure long life performance.
  • The lifting range is from 7-1/8" to 13-5/8"..
Check Stock

Dulytek Retrofit Two Channel Heat Plate Kit 3 x 6 Anodized Aluminum Caged Plates Working with 10-20 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 6" Caged Two Channel Dual Heating Insulated Plates For 10 - 20 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • Paired with Powerful Hydraulic or Air-Operated Shop Presses.
  • Digital Controller with Temperature & Press Timer.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK36), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

OEMTOOLS 24810 20 Ton Bottle Jack Shop Press, Bend, Straighten, or Press Parts, Install Bearings, U-Joints, Bushings, Ball Joints, and Pulleys

  • 20 TON PRESS: Used for parts straightening, bending, and pressing.
  • ADJUSTABLE HEIGHT FLOOR SHOP PRESS: Adjustable work height, multi-position bed.
  • WORKING RANGE: Hydraulic shop floor press working range: Max. height 31.5 inches.
  • PRESS PLATES INCLUDED: Hydraulic press machine set includes press plates.
  • FULL SPECIFICATIONS: 20 ton hydraulic press ram diameter: 1.8" (45 mm).
  • Working range: working range: Adjustable height with a max. height of 31.5 inches.
Check Stock

Moongiantgo Commercial Manual Juicer Hand Press Citrus Juicer Extractor Pomegranate Orange Lime Lemon Squeezer Fruit Juicer Machine

  • Professional Citrus Juicer - Manual Fruit Juice Squeezing, Retain the Original Taste & Nutrition. Suitable for squeezing soft fruits such as grape,....
  • NOT APPLICABLE MATERIALS - Do Not Squeeze 1. Hard fruits: apples /sugar cane. 2. Fruits with less water content: carrot 3. Fruits that are not easy to....
  • Stainless Steel Fruits Contact Part - The Press Cover & Filter & Funnel is made of 304 Stainless Steel, meets food safety requirements. And the....
  • Thickened Base & Labor-Saving Design - Our Hand Press is heavy and stable, when pressing the fruit, just put the fruit in the proper position, hold....
  • Get Your Vitamin C from Healthy Juice, Great Squeezing Tool of Home, Hotel, Bar, Fruit shop, Drink shop. etc! - We provide ONE YEAR WARRANTY and....
Check Stock

2T cable pulling swivel,cable grip puller for Wire Rope, Pulling4409Lb

  • 【Method of operation】：You slip the cable to be tensioned in from the side, The tool clamps onto the cable and the grip tightened as you pull on the loop end. The grip can slip if the cable is wet or coated with dirt or a lubricant, so it should be clean and operated when dry (not during or after a rain)..
  • 【Function】 - It can adjust the overhead power lines, which can solve the problem of sag and tight it..
  • 【High Quality】 - Made of high quality alloy steel, this clamp is durable, stable, and high strength..
  • 【Keep Safe】 - Due to the anti-chip safety device on the clamp mouth, this clamp can make the safety and no jumper. And the tong is smooth, which can reduce the damage to the lead..
  • 【Usage】 - This clamp fit for Cable from 5/32 - 7/8 Inch. With the 2Ton/4409 Lb of max safe load, it is suitable for all kinds of steel cables and cables.
Check Stock

ATPEAM Drill Press Adapter for Hand Drill | Universal Benchtop Portable Drill Press or Mini Drill Press Holder | Adjustable Chuck, Cast Iron Base for Drill Press Stand

  • Premium Material: The drill press stand is made of high-quality aluminum, which is -proof, sturdy and durable. The frame of the bench rig is equipped with anti-skid rings to prevent slippage and maintain stability when drilling. The portable drill drilling guide has a solid column bar and sturdy base with slots for fitting a machine vice.
  • Specification: This mini drill press stands exactly 15.75 inches high.
  • Drill Depth: up to 60mm(2.4″), single hole mount.
  • for adjustable drill press stand with collar diameter of 43mm or 38mm.
  • Ergonomic Design: Ergonomic design for stable and accurate drilling. This type of adjustable drill floor adopts an ergonomically scientific design, making it easy to push in, and the drill press stand will not be more stable and accurate than hand-held drillers.
  • Easy To Use: This vertical drill press is perfect for shop or home use. With a heavy-duty cast metal base for a drill press with slots and mounting holes, it provides ground stability. The handheld drill press has an easy to use non-slip rubber grip handle. There is a slot for installing vice on an iron base, which is extremely easy to use. Well, cut perfect holes in all toughest materials with our easy to use all in one handheld d....
Check Stock

Primula 2-in-1 French Press Cold Brew One Coffee Maker, Comfort Grip Handle, Durable Glass Carafe, Perfect Size, 6 Cup, Stainless Steel

  • 2 ways to brew – this set includes one borosilicate glass pitcher, a cold brew filter with lid and a French press plunger. You can enjoy smooth, delicious cold brew Coffee at home by using the fine mesh cold brew filter, and use the included Stainless Steel French press plunger to make 6 cups of flavourful, bold French press Coffee.
  • Easy-to-use - brew, store and serve all in one. A simple four step process for cold brew Coffee: 1) add Coffee grounds to brew filter. 2) pour cold water over Coffee. 3) brew in the refrigerator overnight (or longer if you prefer stronger Coffee. 4) serve and enjoy. For French press Coffee, it’s easy to make in just 3 simple steps: 1) Remove the French press plunger and add desired amount of Coffee grounds. 2) pour hot water and allow Coffee to brew to desired strength. 3) serve and enjoy..
  • Innovative, one-of-a-kind design - made of extra-tough borosilicate glass with a durable protective holder and comfortable grip handle. Non-slip silicone base protects the glass from accidental slips. For cold brew filter and lid: specially designed lid for seals in freshness for up to two weeks and provides a smooth, drip-free pour and the fine mesh cold filter keeps grounds out of your Coffee. For French press plunger: The fine Sta....
Check Stock

DREAMVAN Pro 8 in 1 Heat Press Machine Combo T Shirt Pressing Machine 15x12Multifunctional 360°Rotation Swing Printing Sublimation Heat Press Transfer Machine for T-Shirt Hat Cap Mug Plate

  • ➤DREAMVAN HOME HEAT PRESS,LCD DIGITAL CONTROL - The heat press machine features a digital temperature gauge ranging from 0 - 250°C (up to 482°F）, Dual Integrated Digital LED display with controller allows you to pre-set temperature and timer countdown.Sound alarm will be issued when time completed.Dissipate heat and automatically shut off when overheat.
  • ➤360 DEGREE ROTATION - Full 360-degree Rotation of Swing-away Design.This heat press adopts rotatable and guide rail design, which can directly and evenly provide a full range of presses to ensure the quality of the finished transfer.
  • ➤8-IN-1 SET, DUAL-TUBE HEATING - The top platen's floatation feature allows it to adjust its angle of attack for even contact., The tshirt press machine will always apply the same amount of heat and pressure with every press.The heat press employs a swingable and guide rail design.
  • ➤QUICK SUBLIMATION, POWERFUL FUNCTION - Our Heat Press Machine helps to direct pressure straight down and apply pressure evenly, thus the quality of the finished transfers can be improved a lot, perfect for T-shirts, caps, ceramic plates, ceramic til....
Check Stock

WCS Portable Hand Held Bow Press with 2 Quad Brackets for Compound Bow Archery

  • All metal construction.Easily replace items and adjust your bow.
  • This portable bow press allows the pro shop or archer to easily replace the string or cables, install peep sights, adjust draw length, replace wheels....
  • Its all metal construction is small enough to fit easily into your belt pack or even your pocket and features a multiple-stop cable for bow-length....
  • Package contain: 1 x bow press, 2 x L brackets.
Check Stock