Reviews 25mm To 50mm Dinse Adapter

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 150-amp WP-17FV Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Dinse 35-50 Solid 1/2 -pin Cable Adapter with Separate Gas

  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper.
  • Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve)..
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Dinse-type 35-50mm solid adapter (compatible with Miller/Lincoln reference # 195378/K960-1) for use with all mainstream welders on markets, as well as ideal replacement for many other aftermarket or equivalent welders. CHECK ALL PICTURES AND YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #....
Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

Lincoln TIG Kit for Power MIG 210MP K3690-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 4 DKJ35-50 & DKZ35-50

  • TIG Welding Cable Panel Connector Socket Quick Fitting Dinse-Style, Rated Current: 315amp Wire Section: 35-50mm2 Socket Mounting Size:....
  • 1pcs : DKJ35-50 315A Euro Style Cable Connector-Plug(with Black Color).
  • 1pcs : DKZ35-50 315A Euro Style Cable Connector-Socket.
  • 1Pcs DKJ35-50 Euro Style Cable Connector-Plug (with Red Color).
  • 1Pcs DKZ35-50 Euro Style Cable Connector-Socket (with Red Color).
Check Stock

StanceMagic - 1.25 inch (32mm) Wheel Adapters (Changes Bolt Pattern) Converts 5x108 to 5x114.3, 12x1.5 Studs, Compatible with Ford Jaguar Lincoln Volvo (5x4.25 to 5x4.5, Silver Spacers) 4pcs

  • ...pattern. Wheel Must Have 5x114.3 (5x4.5") bolt pattern. Buyers also need to verify: 1) Vehicle Centerbore is no larger than 73.1mm.
  • 3) Wheel Studs are shorter than 1.25" (32mm) length.
  • 4) You have 1.25" (32mm) of space between the fender and the wheel/tire. NOTE: These are WHEEL ADAPTERS which are different from spacers (Not for 5x108 (5x4.25") Wheels).
  • [FITMENT] Compatible with Ford 2007-2019 C-Max, 2008-2019 Focus, Taurus, Thunderbird, 2002-2018 Transit Connect, Windstar. Compatible with Jaguar F-Type S-Type XJ XJR XF XFR XFR-S XK XKR XKR-S X-Type. Compatible with Lincoln Continental, LS, Mark 8, Mark VIII. Compatibl with Volvo C30 C70 S40 S60 S80 V50 V70 XC70 XC90. Compatible with Land Rover Range Rover Evoque, Freelander 2, Discovery Sport. Check year/make/model in Description. May fit other vehicles, verify with adapter specifications..
  • [SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.25" (32mm) Wide | Vehicle Bolt Pattern: 5/108 (5/4.25") | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 73.1mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent sur....
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

ESAB EMP 210 Multi Process Welder MIG/STICK/TIG 200A 120/230V DC

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total....
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse....
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12×1.25mm threads.
  • 3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12x1.25mm threads.
  • 3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....
Check Stock