Reviews 24mm Socket Wrench

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

XtremepowerUS Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier w/ Cr-v Socket (Torque Wrench W/ 8pc Socket Set)

  • ...emove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 4800 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) ex....
Check Stock

GUGUGI 10 Pack Automotive Vinyl Wrap Felt Squeegee Soft Scraper Car Wrapping Tool Kits with Micro Fiber Felt for Auto Vinyl Wrap, Window Tint, Wallpaper Installation, 5Inch

  • 5PCS SET -- You will get 16mm & 17mm Engine Mount Socket Wrench, 18mm & 21mm Rear Camber Adjusting Wrench, 24mm Oil Filter Removal Wrench, all marked with the number. 12 point, tilt angle design, used with 3/8'' drive..
  • WHY NEED IT -- 1) 16mm/17mm wrench used for removing nuts from engine fixing screw. 2) Offset 18mm/21mm wrench for adjusting rear axle camber. 3) 24mm oil filter removal wrench for models with common rail engines with DSG gearboxes, help you change oil without removing the battery..
  • 1) 16MM & 17MM Engine Fixing Screws Wrench compatible with Mercedes Benz W124 W126 W140 W170 W201 W202 W203 W204 W210 W211 W219 W220 W221 models..
Check Stock

SHARK SOCKET Adjustable Socket Device - Adjustable Multi-Function Adapter Key Repair Tool ,Powered by Standard Handle Ratchet 3 / 8 '' or by any 15/16'' (24 mm) Open Wrench Key or Ring Wrench.

  • UNIVERSAL TOOL - Adjustable unique key that allows the opening of hexagon shaped nuts and bolts of any size, Powered by standard Handle Ratchet 3 / 8 "" or by any 15/16"" (24 mm) open wrench key or ring wrench. There is unlimited combinations of sizes of bolt heads ".
  • EFFICIENT VERSATILE USE - The socket device can be adjusted according to the nuts head with a turn of a ring. Once the socket device sizes up the nut, it totally eliminates the tolerance between the socket and the head screw..
  • PREMIUM QUALITY DESIGN - Socket adapter is made of Chrome molybden , meet st. MIL-W-8982 steel, with Chrome Nickel plating, Unique design automatically adjusts to any size or shape of head screws and nuts. Compact and easy to carry!.
  • TECHNICAL SPECIFICATIONS - Weight: 245 grams, Dimensions: 40 X 57 mm ( outside dimensions ), Option for opening: 15/16" or 24 mm open wrench key or ring key. Opening range:.
  • EXCELLENT GIFT IDEA - ESHELY Adjustable Socket Device will be a great gift to any friend, loved one or family member. It's a helpful and practical giveaway for birthdays, Christmas, Fathers Day, and a whole lot more!.
Check Stock

Neiko 02472A 3/8-Inch-Drive Colored Mechanics Tool Ratchet, Socket Set, 76-Piece Standard and Deep SAE Sizes 1/4\ to 1\ Metric Sizes 6 mm to 24 mm Made with CrV Steel for Auto Repair

  • RATCHET SOCKET SET: This 76-piece socket wrench set combines both metric and SAE sizes to create the ultimate ratchet and socket kit. It includes standard and metric shallow and deep socket sizes to fit large and small sockets..
  • DURABLE SOCKET-WRENCH SET: Made with chrome vanadium steel, each piece in this SAE and mm tool set has a corrosion-resistant, chrome-plated polish for easy cleanup. The socket pieces are color coded for easy size reading and selection..
  • EFFICIENT SOCKET & RATCHET TOOL SET: High torque, 6-point socket design, each socket fits hex-shaped fastener heads while preventing round off to keep your nuts and bolts in good condition. Use this tool extension set for automotive or home fasteners..
  • INCLUDED EXTENSIONS & TOOLS: This 76-piece set includes a 3/8-inch ratchet, a 15-inch breaker bar, an L-shaped extension, a universal joint, 3-inch and 6-inch extension bars, a carrying case, and 5/8-inch and 3/16-inch spark-plug sockets..
  • SIZES: This mechanic tool socket set kit includes metric shallow sizes from 6 mm to 24 mm and metric deep sizes from 6 mm to 24 mm. It also includes SAE shallow sizes from 1/4" to 1" and SAE deep sizes from 1/4"to 1" in a durable blow mold carrying case..
Check Stock

EZ Travel Flex Socket Wrenches Set (6pc) 6 Point Wrench Set With Flexible Heads and Open Ends Metric Wrenches Set

  • Reach Wherever You Need To: Our flexible socket heads are definitely for hard to work areas, and the EZ Travel Wrench Set gives you 180 degrees + of rotating angles.
  • Our Metric Socket Wrench Set Includes: 10mm wrench, 12mm wrench, 13mm wrench, 15mm wrench, 17mm wrench, and 19mm wrench.
  • Durable and Well Designed: The EZ Travel Metric Socket Set is drop forged, and is made of a treated steel alloy, plus each wrench is chrome plated for durability and to ensure a long life (they look great too).
  • EZ Travel Products Are Built To Last: We strive to make sure our customers are happy, and our lifetime satisfaction guarantee is here to help if you’re not satisfied..
  • More Details: Hex Style Heads amd Open Ends.
Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

CFYUSEU Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV, Black, QJD-3-1

  • Come with 17mm Socket Drill Adapter: The 3 tons jack will come with a 17mm/0.67inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds..
  • Two way to handle: The scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. It will help you lift your vehicle more quickly with 2 handle tools..
  • With Lug wrench: The lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets(17/19mm,19/23mm) to loosen or tighten the lug nuts.Telescoping handle extends to 19 inches for maximum leverage..
  • Come With bag: With the carry bag, Making your carrying more convenient and making the package more compact. Includes: 1x 3 tons jack.
  • Lift Range & Note: Lifting range from 4.1 inches to 17.3 inches.
  • Maximum lifting weight: 3 tons. The jack is only used as a tool for lifting the car, not as a tool for supporting the car. 1 year warrnty, if you have any questions, please feel free to contact us..
  • Included components: Jack Socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.
Check Stock

16 in 1 Multi-Function Bike Bicycle Cycling Mechanic Repair Tool Kit，Bicycle Tool Kit, Motorcycle Portable Multifunctional Repair Tool Set， Folding Metric Repair Tool Set Kit

  • 【Full Multi-function kits】:It can help you fix most Problems of Your Bike With This Kit，all in one tool with 8, 10 and 15mm open end wrenches.1/4" driver with 8, 9 and 10mm sockets,S lotted Screwdriver, Phillips Screwdriver, Socket Extension Rod, Solid Wrench 8/9/10/mm, Hex Key Wrench 2/2.5/3/4/5/6mm, Spoke Wrench..
  • 【Useful and Small】：With good quality, durable, full function. Motorcycle and bicycle Repair Tools Kits can help you to Fix most problems for Your Bike when your are riding outside, Super Lightweight and Small to Put into your bag or pocket, easy to carry..
  • 【Good quality with durable】：Made of high-quality carbon steel and ABS material, professional workmanship, fashion design, durable, stronger and more effective..
  • 【16 function all in one tool】: Socket Hex Wrench 8/10/15/mm,Slotted Screwdriver,Phillips Screwdriver,Socket Extension Rod,Solid Wrench 8/10/15/mm,Hex Key Wrench 2/2.5/3/4/5/6mm,Spoke Wrench.
  • Ideal Thanksgiving and Christmas Gift for Cyclists.
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • ...ove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, ext....
Check Stock

Torque Multiplier Labor Saving Lug Nut Wrench W/ 8 Cr-v Socket

  • The Torque Multiplier Tool Is Designed For Removing And Installing Wheel Lug Nuts On Trucks, RVs, Tractors, HGVs, Trailers And Other Heavy Duty Vehicles..
  • With 1:58 Gear Ratio Bringing 3200 NM, The Lug Nut Wrench Easily Produces A Sufficient Output Torque To Loosen Stubborn Nuts Within Minutes. Saves Both Time And Effort..
  • No Compressors Or Other Equipment Is Required. The Lug Wrench Torque Multiplier Is A Portable And Easy To Use Set That Allows You To Change Tires Anytime, Anywhere..
  • Made Of Sturdy Alloy Steel, Bearing Abrasion And Strong Leverage. The Retaining Ball On Output Shaft Keeps Sockets Secure..
  • Contents 7pcs - Deep Impact Socket (Length 75mm) ： 24mm、27mm、30mm、32mm、33mm、36mm、38mm.
Check Stock

ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover

  • ...ear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • EASY TO USE: Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut.
  • 3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • PERFECT SIZE FOR YOUR NEEDS: Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1 inch drive sockets.
  • CONVENIENT STORAGE: 15.25 by 8.5 by 4 inch (28.7 by 21.6 by 10.2cm) heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organizat....
Check Stock

Mesee Universal Adjustable Drive Socket Wrench Sleeve10~19mm with 1/4" Hex Shank Impact Power Hand Tools Electric Drill Adapter Attachment

  • Adjustable Socket Wrench Made of high-quality 45# steel material with a polished chrome-plated surface, more durable, high hardness, not easy to wear..
  • 65mm socket adapter extension bit with 1/4'' Hex shank fits all quick-change drill chucks. Just directly into drill chuck, handy for fast driving of nuts, bolts and fixings, etc..
  • Impact driver socket wrench sleeve fits standard 3/8" drive wrench, 10mm -19mm in clamping range, easy to clamp and remove damaged, rounded-off, and rusty nuts and bolts..
  • Adjustable socket wrench with an anti-slip design can firmly grasp the nut and bolt, one hand easily operation, improve work efficiency, and bears greater torque than other tools..
  • Multifunctional impact socket adapter set can be applied to the automotive industry, household maintenance, manufacturing industry, construction, and most general repairs..
Check Stock