Reviews 20ma Current Source

NOYITO Voltage to Current Module 0-10V to 0-20mA

  • NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
  • Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
  • Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
  • Easy to use, can be fine-tuned by potentiometer.003cbr003e.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
  • 【Manufacturer's One-year After-sale Warranty】.
Check Stock

Fluke 773 Advanced Milliamp Process Clamp-Meter

  • Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V.
  • Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA.
  • Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications.
  • Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal.
  • Meets EN and IEC safety standards 61010-1 and 61010-2-032.
Check Stock

Lenergy Swim Shorts Anime Girl Wings Swim Trunks Quick Dry Board Shorts S

  • FAST AND EFFICIENT CHARGING- Reach a maximum total of 4000mA for two slots, 3000mA for one slot when pairing with a 9V QC2.0+ output USB power source. Reach a maximum 1000mA charging current per slot when paring with a standard 5V/2A USB source..
  • LCD DISPLAY- Reports key realtime information such as battery health, charging status and charging mode..
  • INTELLIGENT CHARGING- Automatically selects appropriate charging current and voltage to protect the batteries and prolong its lifespan.
  • BATTERY TYPES & SIZES - Compatible with various battery types (li-ion/imr/lifep04/ni-cd/ni-mh) and common battery sizes including (18650, 16340,14500, rechargeable AA, AAA)..
  • PERFECT FOR TRAVEL AND EDC - This bundle includes a LumenTac battery organizer to keep you organized when you are on the go..
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

E-Projects B-0001-C09 Clear Blue LEDs, 5 mm (Pack of 100)

Check Stock

Raymarine E26030 200Khz, Retractable Low Profile Transducer, St40/60/290,

  • RTD PT100 Temperature Sensor Transmitter.
  • Can be converted into 4-20mA current signal through the transmitter.
  • Perfect for two wire solution using a standard RTD sensor package.
Check Stock

4 Bay Smart 18650 Charger with LCD Digital Display Universal Battery Charger for: 26650 20700 18650 18350 17670 17500 16340(RCR123) 14500 AA AAA SC C Batteries

  • ...Li-ion / IMR/LiFePO4: 26650,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440,NiMH/Cd: AA, AAA,SC, C.
  • Multi-functional LCD charging display: for charging progress 25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A,Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR).
  • Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
  • Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4..
  • Note:Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit,If DC input, only 12V 1A is recommended,Mind heating while charging,Remove the charger from power source after charging complete, and remove the battery from the charger at the same time.F....
Check Stock

pigtone Guitar Effect Pedal Power Supply 10 Independent DC Outputs Suitable for 9V 12V 18V 100mA 400mA Short Circuit and Over Current Protection PD-03

  • ♪ It can supply power to multiple guitar pedals at the same time, no current noise, input: DC18V1A, output: 6x 9V 100mA, 2x 9V 400mA, 1x 12V 100mA, 1x 18V 100mA..
  • ♪ Short-circuit/over-current protection: If a short-circuit device is inserted in the socket or the current is overloaded, the power supply will be stopped. Once the device is disconnected from the DC power source, power to the outlet will be restored. It can protect your pedal from damage..
  • ♪ Material: This pedal power supply is made of high-quality aluminum alloy, strong and durable, not easy to break, can be used for a long time, and is easy to carry..
  • ♪ Packing: 1 x PD-03 guitar pedal power supply, 1 x power adapter, 10 x 60 cm cable, 2 x polarity conversion cable, 1 x user manual..
  • ♪ pigtone is a brand and professional manufacturer of guitar pedals and pedal power supplies. We have our own production and R&D factories, engineers and guitarists. If the product you received is not ideal, please contact us for a solution..
Check Stock

Electric Pulse Neck Massager with Heat, Pain Relief, 3 Modes 15 Levels Intelligent Neck Massager Cordless for Pain Relief Deep Tissue

  • ...main sore areas, C4-C7 four cervical vertebrae and the carotid arteries on both sides of the cervical vertebrae, directly hitting the sore points, no longer ineffective massage..
  • EMS pulse technology: The neck massager adopts EMS pulse technology, which filters the power source into an adjustable low-frequency pulse current, "shocks" your skin through the electrode patch, make you feel a slightly numbing sensation when massage, and stimulating the muscles through pulse current to make them repeatedly contract and relax, thereby enhancing the self-healing function of the muscles, relieving pain and fatigue slowing..
  • Cervical spine: Twinklepoch Pro20 allows you to keep an effective exercise of your cervical spine and muscles every day. Through muscle contraction, regularly pull the cervical vertebrae to move, and continuously release the compressed nerves, keep your cervical spine in a healthy curve. Not only can alleviate your neck pain slowly, but prevent the occurrence of some neck prblems. It's a really good choice for people who want to avoid neck problems or relieve neck pain..
  • Muscle: The physical vibration of a single piece only slightly massages the muscles, but when both two massage pieces and EMS technology are used to massage a muscle at the s....
Check Stock

Rhegene New Paperless Recorder 4 Channel Electronic Paperless Recorder Temperature Paperless Recorder DV24

  • Display: 3.5 Inch Color Screen ,320*240 Pixels ,Electric current:0-20mA ,4-20mA Voltage:0-5V,1-5V,0-10V,0-10mV,0-100mV.
  • Input signal: thermal resistance :Pt100,Cu50,Cu53,BA1,BA2.
  • Input impedance: standard current signal input 250 ohm.
  • Thermocrouple:S,R,B,K,N,E,J,T,F1,F2,WRE5-26,WRE3-25.
Check Stock

Rhegene New Paperless Recorder 2 Channel Electronic Paperless Recorder Temperature Paperless Recorder DV24

  • Display: 3.5 Inch Color Screen ,320*240 Pixels ,Electric current:0-20mA ,4-20mA Voltage:0-5V,1-5V,0-10V,0-10mV,0-100mV.
  • Input signal: thermal resistance :Pt100,Cu50,Cu53,BA1,BA2.
  • Input impedance: standard current signal input 250 ohm.
  • Thermocrouple:S,R,B,K,N,E,J,T,F1,F2,WRE5-26,WRE3-25.
Check Stock

Rhegene New Paperless Recorder 8 Channel Electronic Paperless Recorder Temperature Paperless Recorder DV24

  • Display: 3.5 Inch Color Screen ,320*240 Pixels ,Electric current:0-20mA ,4-20mA Voltage:0-5V,1-5V,0-10V,0-10mV,0-100mV.
  • Input signal: thermal resistance :Pt100,Cu50,Cu53,BA1,BA2.
  • Input impedance: standard current signal input 250 ohm.
  • Thermocrouple:S,R,B,K,N,E,J,T,F1,F2,WRE5-26,WRE3-25.
Check Stock

Tenma Audio Impedance Meter - 72-6948

  • DC Voltage : 600mV, 3V, 12V, 60V, 300V, 1,000V.
  • DC Current : 120µA, 3mA, 30mA, 300mA, 10A.
  • Resistance : X1Ω, x100Ω, x1kΩ, x10kΩ.
  • Input Impedance : 20kΩ/V (DC), 9kΩ/V (AC).
  • Dimensions : 6.7"(H) × 4.9"(W) × 1.9"(D).
Check Stock