Reviews 20 Series Pcb Jack

USB C to 3.5 Headphone Jack Adapter-USB C PD 3.0 Quick Charging Port 60W Fast Charge Cable (Black)

  • 60W PD3.0 Fast charge: 60W Quick Charge 3.0 charging speed up to 20V 3A,KOOPAO PD charge adapter only need 1 hour to charge for Xiaomi 10 series,Huawei P30 series,support 1 hour PD 60W Fast Charge for most series smartphones. {Notice}PD charge need PD charger, PD charge cable and UAC 1.0 Type C Device.
  • Multi-function: 3.5mm headphone jack adapter and PD3.0 fast charging ,add a AUX Audio port to your type C device to support USB C to 3.5mm headphone aux jack adapter and USB C PD Charging Port,it only support Audio adapter function by Type C Laptop,not support charging.
  • HiFi Sound：This USB C to 3.5mm jack support Both CTIA and OMTP 3.5mm headphone jack for most Type C device like Mac-book.DAC Chip 24bit 96khz Stereo quality so you can enjoy music anytime anywhere.It would be great for holiday or travel, it also a great back to school gift..
  • Wide compatibility: USB port compatible with i-Pad Pro 2018/2020/Mac-book Pro/mac-book air,Huawei Mate 30 pro/40 pro/P30/P40,Samsung S20/S20 ultra/Note10/Google Pixel 2/3/4 Sony Xperia 1/5/XZ3 Xiaomi Mi note3/6/8/8SE/9/9SE/10/10 Rro/10 Ultra ect..
  • Customer service: PLEASE CONTACT US IF YOUR ITEM NOT WORKING We will appreciate if you contact us by amazon message if you have any question,we will reply within 24 hou....
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

WINGONEER Universal IC Adapter Socket LQFP TQFP QFP32 to DIP28 and TQFP32 to DIP32 IC Adapters for ATMEL AVR Chips

  • Applicable for all ATMEL AVR series QFP32 chips.
  • Applicable for all programmer: TL866CS/A/SP300U/ALL-100GANG/ALL-11 series/LT-48 series/SuperPRO series/TOP series .......
  • Support chips: Atmega48 Atmega8 Atmega88 Atmega168....
  • Package Include: 1 x QFP32 to DIP28 Adapter.
Check Stock

ALLMOST 5 Kit 8 Pin Way DT Series Connector Gray Receptacle IP67 Waterproof Heavy Duty 14-20 AWG 13 Amps Continuous DT04-8P DT04-8S w/Wedge Lock W8P W8S 5 Kits 8 Pin

  • ▲Series: DT Series. Color: Gray. Wire Size: 14, 16, 18, 20. Wire Gauge: 14-20 AWG. Current Rating: 13 Amps Continuous..
  • ▲Operating Temperature: 14°F (-10°C) to +176°F (80°C). Material: Plastic..
  • ▲Insulation: .088"-.145". IP Rating: IP67. Connector Style: Receptacle..
  • ▲Features: Accepts contact size 16 (13 amps), 14-20 AWG, 2, 3, 4, 6, 8, and 12 cavity arrangements. In-line, flange, or PCB mount. Rectangular,....
  • ▲Package include: 5 Kit 8 Pin Way DT Connector.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

ALLMOST 5 Kit 6 Pin Way DT Series Connector Gray Receptacle IP67 Waterproof Heavy Duty 14-20 AWG 13 Amps Continuous DT04-6P DT04-6S w/Wedge Lock W6P W6S (5 Kits, 6 Pin)

  • ▲Series: DT Series. Color: Gray. Wire Size: 14, 16, 18, 20. Wire Gauge: 14-20 AWG. Current Rating: 13 Amps Continuous..
  • ▲Operating Temperature: 14°F (-10°C) to +176°F (80°C). Material: Plastic..
  • ▲Insulation: .088"-.145". IP Rating: IP67. Connector Style: Receptacle..
  • ▲Features: Accepts contact size 16 (13 amps), 14-20 AWG, 2, 3, 4, 6, 8, and 12 cavity arrangements. In-line, flange, or PCB mount. Rectangular, thermoplastic housing. Integrated latch for mating. Wedgelocks assure contact alignment and retention..
  • ▲Package include: 5 Kit 6 Pin Way DT Connector (DT04-6P+DT04-6S)Pin Way DT Connector (DT04-6P+DT04-6S).
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

bestkong Repeater Interface Cable for Motorola Radio GM300 CDM750 CDM1250 M1225 Maxtrac TX/RX-1

  • Designed to connect 2 Mobile radios back to back to make a talkthrough repeater.
  • 16 Pin Plug Connector, Approx 10 " Length.
  • work as simplex model, one radio receive and another radio transmit.
  • compatible models: CDM750, CDM1250, CDM1550, (CDM series plug into the center 16 pin of the 20 pin jack) PM400.
  • M1225, GM380, GM950, GM340, GM360, GM3188, SM50, SM120, GM SERIES, GM300 Series, M Series, Maxtrac Series, Radius Series.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Black

  • Black anodized aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Nickel

  • Nickle plated aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...e to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shape....
Check Stock

keenso Servo Signal Reverser, RC Model Aircraft PCB 5.0-6.0V Operating Voltage Servo Signal Reverser

  • Change direction of rotation : Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • Stable performance : High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • Durable to use : The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life..
  • Perfect workmanship : Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • Compact size : Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock