Reviews 2 way Ball Valve

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

  • This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
  • Barbed edges provide positive connection..
  • Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
  • Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

YELUN Garden hose shut off Valve- 3/4”Heavy Duty Brass Shut Off Valve Hose ball Valve Garden Hose Connector 2 Set

  • Solid Brass Shutoff Ball Valve Faucet Hose Adapter，3/4 in.Male * 3/4 in. Female,garden hose thread. Garden nozzle,watering tools,accurate attachment to faucet/spigot..
  • Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage，Contains 2 Set Solid Brass Shutoff Ball Valve with 4 pcs free rubber gaskets and 1 PTFE pipe seal tape.
  • Shut off valve offers easy on, off and flow control.Allows you to change out any spraying device without having to trek back and forth to the faucet to shut the water on and off.Used indoors or outdoors, you can connect hoses or hard pipes!.
  • swivel connectors for accurate attachment to garden hose ends,sprayer,outdoor faucet..
  • With 3 years product warranty， If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you..
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

YASI Bicycle Presta Schrader Valve Adaptor, 16PCS Brass Bike Pump Adapters, Ball Pump Needle, Balloon Inflatable Toys Nozzle Inflator Adapter, Air Pump Accessories for Standard Pump or Air Compressor

  • 【Complete Bike Valve Adapter】A complete bike tire presta and scharder valve adaptors, suitable for Dunlop valve, Presta valve, Schrader valve. Make your bicycles, motorcycles or automobiles pumping much easier..
  • 【16PCS Valve Adaptor Kit】YASI brass valve pump adapter kit included: 4 x DV/SV valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x Ball pump needle, 2 x solid brass tapered inflatable nozzles and 4 x premium ABS tapered inflatable nozzles..
  • 【Ball Needle & Inflatable Nozzle】2 ball needles and 3 kinds of tapered inflatable nozzles, great for most kinds of sport balls likes basketball, football, volleyball, rugby, yoga ball and swim ring, balloon or other inflatable toys..
  • 【Premium Materials】All of these valve adapters are made of pure solid brass & premium ABS plastic, corrosion resistant with standard screw threads, strong and durable for more long time of use..
  • 【Daily Tool for Family】Easy to use and eco-friendly, kids also can easy to use the plastic tapered nozzle for inflatable toys and balloon. It’s a best choice for bike pumping, sport balls and other inflatable equipment..
Check Stock

Exercize Ball Pump Dual 2-Way Inflator with 2 Replacement Plugs for Inflating Bosu, Stability, Swiss, Yoga, Balance, Core, Fitness, Pilates Physio Balls Stopper Remover Tool Included

  • PORTABLE HAND PUMP Will pump air into any inflatable such as swiss, yoga, bosu, core, maternity and stability balls..
  • DUAL ACTION 2-WAY PUMP - Each pull and push will pump air into the inflatable ball or device making inflating items more efficient.
  • PLUG & REMOVER KIT - Comes with 2 spare plugs to stop exercize ball valves but also has a handy plug remover adapter to easily take the plug out of the valve when you need to deflate the item.
  • 65CM BALL INFLATION TIME - Takes approximatley 5-7 minutes to inflate a typical 65cm exercise stability yoga ball with concistent pumping.
  • SUITABLE FOR INFLATING BALLOONS ALSO - the 2-way hand pump dual action works perfectly well as a balloon pump - perfect for kids parties and celebrations.
  • * takes approx 5-7 mins of pumping to inflate a 65cm ball, depens on individual.
Check Stock

Eastwood 1/2 in. Ball Valve For Dual Blaster For Mixing Valve Assembly

  • Replaces Ball Valve For Mixing Valve Assembly On Dual Blaster.
  • Inline Valve For Connecting Two Pipes Going In The Same Direction With Double-Seal System.
  • Heavy Duty Stainless Handles To Increase Service Life, Fast Turn Open Or Closed Operation.
Check Stock

HWYDTGS 16PCS Premium Brass Valve Adapter, Bike Tire Valve Adapters, Ball Pump Needle, Adapters Kit as Inflation Devices and Accessories fit for Standard Pump or Air Compressor (Brass)

  • 1.PREMIUM VALVE ADAPTER KIT - The valve adapter kit including 3 kinds of adapters, bike tire valve adapter, air pump needle valve adapter of various sport ball, inflatable toys and swim ring valve adapter..
  • 2.COMPLETE BIKE VALVE ADAPTER - Bike valve adapter sealing is very good come with rubber o-ring, it suitable for Dunlop valve, Presta valve, Schrader valve and other inflatable equipment, The adapter can be left on the tire stem so it is always available to inflate your tires..
  • 3.BALL NEEDLE UNIVERSAL DESIGN - As our standard air pump needles can be broadly used for a variety of inflatable toys and sport balls such as swim ring, basketball, football, volleyball, rugby, yoga ball and more. This is the best choice if you are a sports ball enthusiast or have a variety of inflatable toys for children..
  • 4.THE BEST MATERIAL - All of these valve adapters are made of quality brass with screw threads, which is corrosion resistant and not easy to break, you can using it all the time..
  • 5.LIVE TOOL FOR FAMILY - According to statistics, The premium valve adapter kits have been used 2 or 5 times a week for a family. it have become daily tool for most family, put it in your shopping cart now..
Check Stock

Rage Fitness Slam Ball, Ideal for Cross Training, Core Exercises, Plyometric and Cardio Workouts, black (CF-SB310)

  • RAGE SLAM BALL is encased in an ultra-durable heavy-duty rubber shell.
  • It is high endurance impact approved and performs in ways a medicine ball cannot.
  • TEXTURED SURFACE - Allows for a high quality grip even when wet.
  • NO BOUNCE DESIGN - Ideal for various throwing and Slamming routines.
  • equipped with an air valve that releases pressure to prevent bursting.
  • EQUIPPED WITH AIR VALVE - Releases pressure to prevent bursting.
  • This air valve also makes it possible to adjust the air capacity and overall firmness of the slam ball.
Check Stock