Reviews 2 Wire Oxygen Sensor

MIROZO 234-4092 Oxygen O2 Sensor Downstream for Acura NSX 1995-1999, for Honda Civic 2001-2005, for Honda Odyssey 1996-1998, for Honda Prelude 1997-2001 1PCS

  • TIPS: If you are not sure whether this product is suitable for your model, please check detail page, or inform us your vehicle part number to let us check for you.Oxygen (O2) Sensors commonly fail due to contamination. When checking or replacing an O2 Sensor, visually inspect the sensor body to determine if it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor..
  • FEATURES OF THE MIROZO OXYGEN SENSOR - Internal Ceramic Insulation for optimal sensor performance.
  • Laser welded sensor body to keep out contaminants.
  • Dual Insulated Protective Cover Prevents premature zirconium sensor wear.
  • Sealed wire leads prevent water interference with electronic signal..
  • ADVANTAGES OF THE MIROZO OXYGEN SENSOR: Improve Engine Response & Performance.
  • Prevent premature failure of the catalytic converter..
  • An OBD Scan Tool will usually identify Oxygen (O2) Sensors by the Bank Number (B1 = Bank 1.
  • B2 = Bank 2) and Sensor Number (S1 = Sensor 1.
  • S2 = Sensor 2, etc.). Bank 1 is not on the same side of the engine for every vehicle. Bank 2 refers to the bank opposite Bank 1. Sensor 1 refers to the sensor before the catalytic converter. Other Terms: Upstream Sensor, Pre-Cat....
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

Marsflex O2 Oxygen Sensor Downstream 234-4623 Compatible for Toyota Camry Sienna Celica Prius Matrix Supra Lexus ES300 GS300 GS430 GS400 GS460 Pontiac Vibe Scion xD Replacement 250-24623

  • Garage-Pro Aftermarket Replacement Oxygen Sensor Compatible with 2009-2014 Ford F-150, Fits 2005-2010 Volkswagen Jetta, Fits 2012-2015 Volkswagen....
  • Garage-Pro Aftermarket Replacement Oxygen Sensor Compatible with 2006-2010 Volkswagen Passat, Fits 2009-2011 BMW X5, Fits 2014-2015 BMW X5, Fits....
  • Garage-Pro JCWSE-REPV960922-2GP Features: Set of 2, (2) Oxygen Sensors, 5-wire, Threaded-in Mounting Style, Male Connector, M18-1.5 Thread Size, 7/8....
  • Interchange Part Numbers: 25025035, 17270.
  • A high quality, Direct Fit OE Replacement Oxygen Sensor, with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items..
Check Stock

Offset Oxygen Sensor Socket 3/8-Inch Drive 7/8-Inch 22mm Wire Gate Accesses Sensor from Side Preventing Damage to Wires Universal for Most Cars

  • PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function.....
  • DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is....
  • FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the....
  • FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this....
  • WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time,....
Check Stock

EWK 22mm 7/8 Inch O2 Oxygen Sensor Flex Head Wrench Removal Tool

  • 【 Flexible Operation 】Goes into narrow space and odd angles with the unique contour handle. EWK oxygen sensor removal tool works around the exhaust and gets to places ordinary wrenches won't. Easy to remove or install the hard-to-reach and stuck O2 sensors..
  • 【 Extra Leverage 】Swiveled head helps create extra leverage in narrow areas. The 22mm oxygen sensor wrench helps getting additional clearance during the job. Effortlessly turns the removal job into a breeze..
  • 【 Slotted Design 】 Get to the O2 sensor from the side to prevent damaging the wire or the sensor. Keeping the wire harness attached by getting to the sensor from the side instead of from the top..
  • 【 Great Compatibility 】EWK O2 sensor remover is designed to work on 7/8″(22mm) O2 sensors. Compatible for Ford contours, 4.6L, 5.4L Ford modular engines. Covers most vehicles on the market..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Michigan Motorsports GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24 inches long

  • GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24".
  • QTY 2 24 inch Grey Square Connector O2 Sensor Extensions.
  • This listing is for two 24" grey square connector oxygen sensor extensions. They will work on many GM application besides those listed..
  • Look carefully at the connector pictures to verify they are what you need, ask if you are unsure..
  • Fitment information: 08-09 G8 GT V8 2004 LS1/LS6 Corvette (front sensors) 04-06 LS1/LS2 GTO (front sensors) 04-05 LS6 CTS-V (front sensors and rear)....
Check Stock

Denso 2344256 OXYGEN SENSOR

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
  • Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Oxygen Sensor for Aston Martin Ford Jaguar Lincoln Mazda Mercury Nissan Compatible with Bosch 15717

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic....
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with 15717, ZZC318861. These sensors will meet or exceed OEM standards, it is a direct....
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single....
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility....
Check Stock

MARSFLUX Oxygen O2 Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires

  • 【Compatible】O2 Oxygen Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires. OE:250-25001. Please enter the year, make and model number....
  • 【Professional Manufacturing】 O2 oxygen sensor is manufactured in strict ance with the original standard, stable performance, excellent....
  • 【Excellent Quality】 The oxygen sensor is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones,....
  • 【Operating Principle】The role of the oxygen sensor is to determine whether there is excess oxygen in the exhaust after engine combustion and to....
  • 【Fast Shipping & Warranty Commitment】O2 oxygen sensor shipped directly from the USA within 2~5 working days, warranty 2 years. Please enter the....
Check Stock

ABIGAIL 15718 Oxygen Sensor for Aston Martin Ford Jaguar Lincoln Mazda Mercury compatible with Bosch 15716 15717 15718

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic....
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15717,15718, ZZC318861. These sensors will meet or exceed OEM standards, it....
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single....
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility....
Check Stock

MOSTPLUS O2 Male Oxygen Sensor Up Down Stream Compatible with Ford F-150 F-250 5.4L Set of 4 4

  • Fitment: Compatible with Aston Martin DB7.
  • Compatible with Ford Crown Victoria Mustang Taurus Escape GT Thunderbird F-150 F-250 F-350 F-450 F-550....
  • Interchange Part Number: 15717, 234-4071, 234-4046, SG1814, ES20104, 250-24001.
  • Product Specifications: Package Includes--4 x Oxygen Sensor(4 sensors are the same).
  • Feature: The key parts including chip from top supplier.
  • Stock parts direct replacement and with....
  • Tip: Bank 1 Sensor 1=Upstream Right/Rear.
Check Stock

17014 LSU 4.2 Oxygen O2 Sensor Replacement for Audi A4 TT VW Beetle Golf Jetta 5-Wire WideBand O2 Sensor Upstream Sensor 0258007057 0258007090 17014 O2 Sensor

  • Replacement LSU 4.2 Oxygen Sensor || The 5-wire wideband 17014 upstream Sensor 1. It is the 17014 wideband sensor that replacement for Audi A4 A8 TT....
  • Compatible with Audi VW Rolls-Royce || 2001-2006 A4 o2 sensor, 2004-2006 A8 o2 sensor, 2001-2006 TT 02 sensor, 2001-2004 Beetle o2 sensor, 2002-2006....
  • OE/ Replace Number || The upstream sensor replacement for Bosch 17014, 0258007057, 0258007090, 0258007351, 0258007085, 021906262B, 06B906265D,....
  • OEM Design, Direct Fit || The 17014 o2 sensor is direct fit for the factory oem oxygen sensors. Designed to meet / exceed the oem standards. Premium....
  • A 24-month Warranty || A 24-month warranty comes from the sensor 17014. Lower price, better item. Save time, save money. If there's sth for you,....
Check Stock

Set of 4 Oxygen O2 Sensor Upstream & Downstream Compatible with 2004-2007 Dodge Ram 1500 Magnum Charger Commander Liberty Chrysler 300 Mitsubishi - Replaces 56028994AA 56028994AB 05149170AA OS5249

  • Description -- Oxygen sensor, O2 sensor, upper oxygen sensor, sensor-oxygen. The 2 upstream sensors are the same as the 2 downstream sensors. Commonly....
  • OE & Replace Part -- for Mopar: 56028994AA, 56028994AB, 5149170AA, replace 56044627AA, 56044652AA, 05149170AA.
  • Compatible with Jeep Mitsubishi Chrysler Dodge -- for 2005 2006 2007 300 Oxygen O2 Sensor, 2006 Mitsubishi Raider Oxygen O2 Sensor, 2006 Commander....
  • Yikesai OEM Design - While these are not genuine OEM oxygen sensors, it is a direct replacement for the factory O2 sensors. commonly found on charger....
  • What you'll get - 24 months' warranty. Save hundreds of $$ from Yikesai. If the O2 sensor ever fails, please contact us for a replacement..
Check Stock