Reviews 2 Ways Socket

3/8\ Ratcheting Quickie Rope Tie-Down w/ 12ft Rope, 650lbs. Working Load Limit

• NEW Rope Tie-down with built-in ratchet for extra tensioning.
• 4 ways to tension rope / Socket drive inset on two sides of tie-down.
• Great for atvs, motorcycles, boating, and cargo securement.
• 2 rubber coated S hooks / 12ft rope pre-installed.
• 650 lbs Working Load Limit / U.S. Patents 9,254,989 and 9,272,886.

OTC 4542 Stinger Wheel Bearing Locknut Socket Set - 7 Piece

• 7-Piece wheel bearing locknut socket set.
• For use with 1/ 2 inch ratchet or breaker bar.
• Set contains 55 mm hex locknut socket 2-3/8 inch hex locknut socket 2-1/ 2 inch hex locknut socket 2-1/ 2 inch rounded hex locknut socket 2-3/4 inch rounded hex locknut socket 2-9/16 inch rounded hex locknut socket and 2-3/8 inch rounded hex locknut socket works.

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

• Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
• 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
• 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
• 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
• 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
• 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
• 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.

PST35 Pistol Iron Sight Installation & Disassembly Tool, Front Sight Tool for Glock

• ... improved design details, such as adding spring support to the horizontal tray, which is more stable, won’t tilt when barrel placed.
• the horizontal sliding splint is buffered to protect the barrel or sights from damage,as well as ensure tightly clamped.
• the push rod part is optimized to T-shaped working with Hex socket head screwdriver, labor-saving and easy to push..
• 2 Different working ways and multiple use：1）when used as a whole,this pusher kit has well performance at front sight removal and installation and real sight adjustment.2) the sight tool itself can also be disassembled into 2 parts, and the upper part is able to quickly adjust sights or replace new sights in horizontal direction without pistol disassembly,just clamp your barrel between slide plates.the practical function helps serve more different types of firearms..
• What You Will Get: Package includes:1x Universal sight tool；1xAllen wrench；1x Hex socket head screwdriver（will work as part of T-wrench). Years of professional R&D and manufacturing of hunting and outdoor supplies, you can always get prompt support on this sight disassembly tool within 24H..

COLRJADELY Smart Led Ceiling Light with Bluetooth Speaker, 30w(250w Equivalent) 2700lm RGB Colors Change Music Ceiling Lamp with Remote Control for Kis Room Bathromm Gamesroom Party

• ... service life over 50,000 hours.The combination of superior color rendering and high quality LED chips restores the original color of the object, providing you with visual enjoyment while saving power for your home..
• 【One light two ways to install】 This bluetooth ceiling lamp can be applied as a ceiling light or socket ceiling.(E27 socket).easy to install,one person can do it independently in both installation ways. Note: The ceiling installation method requires the lamp holder to be mounted on the ceiling..
• 【IP65 Waterproof and Dustproof】 Bluetooth light waterproof rating up to IP65, modern UFO lampshade for indoors or outdoors like bathroom kids room, hallway. Sealed design to protect against splashing water. Easy to clean..

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

• Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
• Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
• 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
• Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....

DEWALT Impact Socket Set, 1/2\ Drive, Metric (DWMT74739)

3 Prong Light Socket Adapter, E26 Light Bulb Outlet Adapter, Polarized Light Socket to Plug Adapter, White Light Bulb to 2/3 Prong Outlet Plug Splitter Converter for Garage Porch CCTV Camera (1 Piece)

• 3 Prong Design Light Socket to Plug Adapter: the light socket adapter is 3 prong socket design, 3 prong socket can be applied in both 3 plug and 2 plug, a wider range of applications.
• Additional 2 Socket Outlets: the light socket adapter splits your standard socket to 2 polarized outlet and 1 bulb socket for your convenience, good for garage, workshop, basement, porch, patio, Halloween Christmas Outdoor Lights, security cameras.
• Electrical Ratings: E26/E27 socket outlet adapter voltage range: 0-125VAC, wattage: 1250W.
• This light bulb adapter is not suitable for use in wet locations.
• Stable Material: the light bulb socket adapters are made of flame retardant PBT material, heat resistant and long lasting, this light socket plug attached with US standard.
• Easy to Install: you just need to turn off the fixture, remove the existing bulb, and screw the light socket plug adapter into the light socket.

2 Pack 3 Prong Light Socket Adapter, E26 Light Bulb Outlet Adapter, Polarized Light Socket to Plug Adapter, White Light Bulb to 2/3 Prong Outlet Plug Splitter Converter for Garage Porch CCTV Camera

• 3 Prong Design Light Socket to Plug Adapter: the light socket adapter is 3 prong socket design, 3 prong socket can be applied in both 3 plug and 2 plug, a wider range of applications.
• Additional 2 Socket Outlets: the light socket adapter splits your standard socket to 2 polarized outlet and 1 bulb socket for your convenience, good for garage, workshop, basement, porch, patio, Halloween Christmas Outdoor Lights, security cameras.
• Electrical Ratings: E26/E27 socket outlet adapter voltage range: 0-125VAC, wattage: 1250W.
• This light bulb adapter is not suitable for use in wet locations.
• Stable Material: the light bulb socket adapters are made of flame retardant PBT material, heat resistant and long lasting, this light socket plug attached with US standard.
• Easy to Install: you just need to turn off the fixture, remove the existing bulb, and screw the light socket plug adapter into the light socket.

ABN Hex Bit Sockets - 34 Pc Allen Socket Set SAE and Metric Hex Bit Set Hex Wrench Bit Socket Sets 3/8, 1/4, 1/2 Inch

• TUNE-UP YOUR RIDE: The ABN Master Hex Bit Socket Set - Universal Allen Wrench Socket Set SAE and Metric Hex Bit Sockets features 34 individual hex allen sockets and bits to fit your 1/4, 3/8, and 1/2 inch allen wrenches, hex socket ratchets, and impact wrenches.
• Make repairs to your bike or motorcycle, wheelchair or lawn and farm equipment, performance machinery or home appliances, or even your family vehicles that require hex bits.
• INCREASE TORQUE: Chrome vanadium provides superior torque and enhanced leverage for greater turning power to exceed general specifications.
• Each socket in this hex allen head socket set is precision machined for accuracy and smooth action and to reduce wear on your hex socket bits and fasteners.
• Securely locks onto your 1/4, 3/8, and 1/2 inch ratchet drives (Ratchets and wrenches not included).
• PERFECT FIT FOR YOUR NEEDS: Hex wrench socket set includes (17) standard SAE sizes - 1/4-inch Dr. 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4".
• 3/8-inch Dr. 9/32”, 5/16”, 3/8”, 7/16”, 1/2".
• 1/2-inch Dr. 9/16", 5/8", 11/16", 3/4", and (17) metric sizes - 1/4-inch Dr. 1.5mm, 2mm, 2.5mm, 3mm....

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

• MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
• Quickly identify the right tool every time with this tool socket organizer.
• Additional 1/2 inch socket organizer tray to accommodate any socket collection.
• FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
• Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
• Anodized black finish creates a sleek toolbox appearance.
• NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
• The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
• Our socket set organizer is designed to meet your needs.
• INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
• Subtle socket set tray organizer design means they fit easily in any storage drawer.
• TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
• (2) 1/2” socket holders organizers for tool box measure 12” x 3”.
• The socket organizer for tool box drawer has adjustable studs.

GiiNii SH-702B 7-Inch Analog Picture Frame Black

• 16:9 Wide Screen with 480 x 234 Resolution.
• 5 in 1 slot memory card reader and memory stick socket: SD Card, MS Card, MMC, MMC+, xD (Micro SD, Mini SD, MS Duo with adaptor).
• Clock/Calendar, On Screen Programming, Zoom-in, and thumb nail viewing.
• Slide show (In order or random + transitional effects), JPEG-TIF-GIF, Automatically rotates side-ways pictures.

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

• STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
• This socket set organizer accepts both shallow and deep sockets.
• USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
• 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
• SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
• BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
• Socket clips constructed from heavy-duty plastic.
• End caps constructed from soft plastic (caps removable).
• Set holds up to 48 sockets (16 sockets per rail).
• SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
• Your sockets attach to plastic clips which are friction fit to the aluminum rail.
• The clips are held in place by soft plastic end caps that are also friction fit to the rail.