Reviews 2 Spindle Gun Drill

PROXXON Bench Drill Press TBM 115, 38128 , Green

  • Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
  • High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
  • 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
  • Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
  • Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.
Check Stock

Shop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press/Spindle Sander

  • Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM.
  • Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums..
Check Stock

Amazon Brand - Denali by SKIL 20V Cordless Hammer Drill Kit with (2) 2.0Ah Lithium Batteries and Charger

  • Cross-compatible with all SKIL PWRCORE 20 tools, batteries, and chargers.
  • Cordless hammer drill kit with 3-in-1 driver, standard drill, and hammer drill for power and versatility.
  • Includes a 20V hammer drill, 2 Denali by SKIL 20 2.0Ah lithium batteries, a 2.4A charger that fully charges a 2.0Ah battery in 60 minutes and a 4.0Ah battery in 100 minutes, bit, and belt clip.
  • Toggle between driver (for screws), drill (for wood, plastic, and metal), and hammer drill (for bricks and cement).
  • 1/2-inch keyless ratcheting chuck with auto spindle lock for quick, easy bit changes.
Check Stock

scottchen PRO Spindle Sander Adaptor 4-1/2\ x 1/2\ with Rubber Sanding Drum Kit OD 3/4\

  • 【Function】This spindle sanding drum Kit is used for sanding and polishing curves, resurfacing, contouring, smoothing inner hole, and material removal etc. Especially excellent for woodworking projects..
  • 【Application】This spindle mandrel with drum Kit suitable for diameter in 3/4 inch, 1 inch, 1-1/2 inch wood project treatment. Length 4-1/2” great for thick wood board sanding..
  • 【Mandrel & Drum】This spindle sander adaptor mandrel head is 3/8” diameter, fit for most oscillating drill press. Rubber sanding drum in 3size 3/4.
Check Stock

MYSWEETY Upgrade Version CNC 3018 Pro Engraver Machine, GRBL Control DIY Mini 3 Axis CNC Router Kit, Wood Router Engraver Pcb Milling Machine with Offline Controller + ER11 and 5mm Extension Rod

  • New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • The main two advantages of offline controller : 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • Simple Assembly: Download the English manual and software: https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1(1).rar. If you have any question, please contact us firstly, thanks!.
  • This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack..
  • Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.DescriptionDescription:.
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

Stalwart 25 piece 4.8V Cordless Screwdriver with LED

  • ELECTRONIC SCREWDRIVER SET – This automatic screwdriver comes with 24 various screwdriver and drill bits, a convenient carrying case, and a charging cord, so you can be sure your mini drill is always charged and ready to go..
  • FORWARD AND REVERSE SWITCH – The electric screwdriver is equipped with a forward and reverse switch, great for drilling screws into walls and taking them out. With the comfortable soft grip handle, using the power screwdriver is a breeze..
  • AUTOMATIC SPINDLE LOCK – This electrical screwdriver features an automatic spindle lock that safely locks the drill bit in place, has a no-load speed of 180rpm, and comes with a LED work light on the head that makes it easier to see..
  • INCLUDED CARRYING CASE – The electrical screwdriver set comes in a convenient carrying case to keep all your tool bits protected and stored away in between uses. This case also makes it easy to take your driver with you on the go..
  • PRODUCT DETAILS – Materials: Plastic and Metal. Specifications: 4.8V. 25-Piece-Set of Screwdriver and Drill Bits with Included Carrying Case. Color: Red..
Check Stock

DEWALT Electric Drill, Mid Handle Grip, 1/2-Inch, 10-Amp (DWD215G)

  • 10-amp motor of the electric drill delivers increased drilling performance.
  • Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability of the corded drill.
  • DEWALT corded drill has 1/2-inch all-metal, single-sleeve, ratcheting, keyless chuck with automatic spindle lock provides greater bit retention and tool-free convenience.
  • Mid-handle grip design with soft grip provides increased balance and comfort.
  • 0-1250 RPM, variable speed reversing switch for increased versatility.
Check Stock

WEN DPA130L Light Duty JT33 Keyless Drill Press Chuck with 1/32 to 1/2-Inch Capacity

  • Operates with less than 0.008 inches of runout (0.2 mm).
  • Holds drill bits anywhere from 1/32 to 1/2 inches in diameter.
  • Easily open and close the three chuck jaws without any tools or keys.
  • Universal design fits onto any drill press with a JT33 spindle.
  • Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses.
Check Stock

BUCKTOOL 12-INCH 6.2-A Professional Bench Drill Press Powerful 3/4HP Benchtop Drill Press Variable Speed Drill Press with IIIA Laser and Work Light

  • POWERFUL 6.2A MOTOR: Equipped with a powerful 6.2A induction motor (most 12-IN drill press motors are only 5A), provide you constant power to drill through all kinds of material.
  • PROFESSIONAL DRILL PRESS: 1/32" - 5/8" Keyed chuck, 12" swing, 3-1/8" spindle travel, and overall height of 39" (2" high than other 12" drill press).
  • VARIABLE SPEED: You can easily adjust the speed from 580 to 3200 RPM, satisfying your drill needs from wood to all kinds of metal. Digital speed readout helps precisely control the speed.
  • FULLY ADJUSTABLE WORK TABLE: The flat work table can rotate 360° and bevel 45° left or right.
  • EXTRA SUPPORT: This drill press equips with a Class IIIA 2.5mW laser, work light, emergency stop switch, and no voltage release switch, help you work precisely and safely.
Check Stock

614367-00 Carbon Brush Set 0502025007 Fits for DeWALT D24000/DW713/DW715/DW716 Miter Saw

  • 10-amp motor of the electric drill delivers increased drilling performance.
  • Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability of the corded drill.
  • DEWALT corded drill has 1/2-inch all-metal, single-sleeve, ratcheting, keyless chuck with automatic spindle lock provides greater bit retention and....
  • Mid-handle grip design with soft grip provides increased balance and comfort.
  • 0-1250 RPM, variable speed reversing switch for increased versatility.
Check Stock