Reviews 2 Mm Thickness

1/8 x 1 Brass Flat BAR 12 Long Solid .125 Plate Mill Stock H02 1/8 x1 x12

  • Various sizes of brass flat bar are offered with vaiety of thickness , width & length . Choose the best that suits your craft or knife blade making project. Our brass flat bars are fresh cut & hence can be used for Lathe , milling & other functions. Semi hard brass bars are good for all types of craft projects..
  • Sizes Available 1/8" x 2" x 12" brass flat bar ( approx. 3mm thickness) 1/4" x 2" x 12" brass flat bar (approx. 6mm thickness) 1/2" x 2" x 12" brass flat bar (approx. 12mm thickness) 3/8" x 2" x 12" brass flat bar (approx. 10mm thickness) and many more to choose from.
  • We will be adding more and more size options for Brass Flat Bars , Rods & Sheets, if you need a specific size and do not find it in the listing send us a message and we will add it to the offering..
  • High quality Brass Flat Bars for Knife & Craft Hobby.
Check Stock

Rockwell Hardness Test Block-15N Scale-HR15N78

  • (1)Thickness:“2.5mm 5mm 7.5mm 10mm 12.5mm"..
  • (2)Please note that the prices is only one pieces 1018 Steel 5 Step 2.5mm 5mm 7.5mm 10mm 12.5mm Ultrasonic Test Blocks..
  • (3)If you need to buy other Ultrasonic Calibration Blocks,please let me know,I will help you to solve it..
  • (5)Used for thickness and linearity calibration.
Check Stock

30 Pcs Stainless Steel Stud Earring Cabochon Setting Post Cup Fit for 14mm,30 Pcs Glass Cabochons,60 Pcs Earring Backs (Fit 14 mm Cabochons)

  • Cabochon setting: Internal diameter 14 mm,thickness 2 mm.
  • Glass Cabochons: diameter 14 mm, thickness 5 mm.
  • Butterfly earring backs(30 Pcs): length 6 mm, thickness 4.5 mm.
  • Clear bullet earring backs(30 Pcs): diameter 5 mm, thickness 5 mm.
Check Stock

Concrete Molds DIY Sold Set 22 Concrete MOLDS River Rock Stone Moulds Wall Veneer Stones for FIREPLACES #W05

  • 22 CONCRETE MOLDS RIVER ROCK STONE MOULDS WALL VENEER STONES FOR FIREPLACES #W05.
  • Molds are made of ABS plastic thickness 1,9-2mm. Depending on the geometry of the product wall thickness can form less than the above dimensions..
Check Stock

Rockwell Hardness Test Block-C Scale-HRC 55

  • Please note that the prices is only one pieces 4 Step 2.5mm 5mm 10mm 20mm Ultrasonic Step Test Blocks..
  • Used for thickness and linearity calibration..
  • If you need to buy other Ultrasonic Calibration Blocks,please let me know,i will help you to solve it..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

AYUBOUSA 12x17 Inch Blank Guitar Bass Pickguard Material Scratch Plate for Fender Stratocaster Telecaster Custom, 3Ply White

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • 3Ply constructions made of quality celluloid and PVC plastic material..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
Check Stock

MLHpeak Invisible Hinges Hidden Hinge Concealed Hinge 180 Degree Swing Hinge 7 inch (2, Silver)

  • DIMENSION - 7 x 2.8 x 1 inch, MATERIAL – Zinc alloy embryo + aluminum alloy core.
  • EASY INSTALLATION - Three-dimensional adjustable range: vertical ± 3.0mm, horizontal ± 2.0mm and depth ± 1.0mm, do not have to remove the door can be adjusted.
  • Three-dimensional adjustable range: APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mmup and down ± 3.0mm, left and right ± 2.0mm, before and after ± 1.0mm, do not have to remove the door can be adjusted.
  • APPLICABLE DOOR SIZE - Door Thickness 35mm～40mm, Door Width ＜1000mm.
  • APPLICATION - 2 hinges will support 177 lbs, Fit for wooden doors and flush doors.
Check Stock

HLMOptimo Double Action Spring Door Hinge Stainless Steel (4, 4 inch)

  • DIMENSION - 7 x 2.8 x 1 inch, MATERIAL – Zinc alloy embryo + aluminum alloy core.
  • EASY INSTALLATION - Three-dimensional adjustable range: vertical ± 3.0mm, horizontal ± 2.0mm and depth ± 1.0mm, do not have to remove the door can be adjusted.
  • APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mm.
  • Three-dimensional adjustable range: APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mmup and down ± 3.0mm, left and right ± 2.0mm, before and after ± 1.0mm, do not have to remove the door can be adjusted.
  • Finger protection from small gap between door and frame..
Check Stock

IKN 12 x 17 Inch Blank Guitar Pickguard Material Scratch Plate Backplate Sheet for Electric Guitar Bass Pickguard Custom, 3Ply White

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • Material: 3Ply constructions made of quality PVC plastic material. Color: white / black / white..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • Package Includes: 1pc blank pickguard material..
Check Stock

IKN 12 x 17 Inch Blank Guitar Pickguard Material Scratch Plate Backplate Sheet for Electric Guitar Bass Pickguard Custom, 4Ply Aged Pearl

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • Package Includes: 1pc blank pickguard material..
Check Stock

4 Pc 5x135 MM to 6x135 MM 5 Lug to 6 Lug 2 Piece Construction Hub Centric Conversion Wheel Spacers Adapters 2' Thick 14x2.0 Studs Works with 1997-2002 Ford F150 Adapting 03+ Ford F-150 Wheels

  • 4 Pc of 5 Lug To 6 Lug 2″ Thick Hub Centric CONVERSION Wheel Adapters. Allows you to put 6×135 MM Wheels on a 5×135 MM Vehicle..
  • Adapter Specs: Color: Raw Aluminum | Thickness: 2″ (51 MM) | Bolt Pattern: 5×135 MM | Wheel Bolt Pattern: 5×135 MM| Wheel Bore: 87 MM | Hub Bore: 87 MM | Thread Pitch: 14×2.0.
  • Each Adapter is 2 Pieces | Adapter Thickness Back Piece: 1.25″ | Adapter Thickness Front Piece: 0.75″ | Material: Aerospace 6061 T6 Forged Aluminum.
  • Bolt-On Kit With All Hardware Included. Free Thread Locker.
  • Fits Ford Vehicles With A 5×135 MM Bolt Pattern – Full Hub Centric.
Check Stock

IKN 12 x 17 Inch Blank Guitar Pickguard Material Scratch Plate Backplate Sheet for Electric Guitar Bass Pickguard Custom, 4Ply Red Tortoise Shell

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • Package Includes: 1pc blank pickguard material..
Check Stock