Reviews 2 Flutes Bits

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

COMOWARE Titanium Twist Drill Bit Set - 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy Quick Change 1/16 -1/4

  • HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean..
  • Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process..
  • Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
  • Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use..
  • Organized Holder - A drill bits holder with size index is included in the set for easy storage and organizing. The drill bits set fits the majority of brands currently on the market..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

6Pack 1/8\

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Inch Size:1/8.
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

MAGBIT 786.24.0816 MAG786 1/2-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.24.0616 MAG786 3/8-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.18.0316 MAG786 3/16-Inch by 18-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.30.0616 MAG786 3/8-Inch by 30-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.24.0416 MAG786 1/4-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.18.0816 MAG786 1/2-Inch by 18-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

Jerax tools 3/16 to 7/8 Inch Step Drill Bit M2 HSS Spiral Grooved Step Bit for Stainless Steel Metal Wood Plastic

  • [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle..
  • [Easy & Fast]: With our high-accuracy CNC processing and optimized spiral design over the years, our spiral flutes design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Compared to the Straight flutes, the Spiral flutes guide the debris out faster by its nature, making the drilling smoother and creating fewer burrs for the holes. Once you've tried our spiral design, there's no way back to the straight design..
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel..
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 12 sizes so you can drill 12 different hole sizes, saving you time and effort to change bits. Marked sizes include: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock